Curvature derived from LiDAR digital elevation models as simple indicators of debris-flow susceptibility

To mitigate the damage caused by debris flows resulting from heavy precipitation and to aid in evacuation plan preparation, areas at risk should be mapped on a scale appropriate for affected individuals and communities. We tested the effectiveness of simply identifying debris-flow hazards through automated derivation of surface curvatures using LiDAR digital elevation models. We achieved useful correspondence between plan curvatures and areas of existing debris-flow damage in two localities in Japan using the analysis of digital elevation models(DEMs). We found that plan curvatures derived from 10 m DEMs may be useful to indicate areas that are susceptible to debris flow in mountainous areas. In residential areas located on gentle sloping debris flow fans, the greatest damage to houses was found to be located in the elongated depressions that are connected to mountain stream valleys. Plan curvaturederived from 5 m DEM was the most sensitive indicators for susceptibility to debris flows.     

LEADAT: a MATLAB-based program for lead-210 data analysis of sediment cores

1Introduction Tracking the history of man s impact on the en-vironment, it is clear that in many places the periodof greatest impact and most dramatic transformationlies within the last 150 a (Oldfield and Appleby,1984). Many aspects of this impact can be…     

Estimating the Asian radon flux density and its latitudinal gradient in winter using ground-based radon observations at Sado Island

Terrestrial radon-222 flux density for the Asian continent, integrated over distances of 4500 km, is estimated in two 20° latitudinal bands centred on 48.8°N and 63.2°N. The evaluation is based on three years of wintertime radon measurements at Sado Island, Japan, together with meteorological and trajectory information. A selection of 18% of observations are suitable for evaluation of an analytical expression for the continental surface flux. Various meteorological assumptions are discussed; it is found that there is a substantial effect of increased complexity of the formulation on the flux estimates obtained. The distribution of spatially integrated radon flux over the Asian landmass is reported for the first time. Expressed as geometric means and 1σ-ranges, estimated fluxes are 14.1 mBq m⁻² s⁻¹ (1σ-range: 18 mBq m⁻² s⁻¹) and 8.4 mBq m⁻² s⁻¹ (1σ-range: 10 mBq m⁻² s⁻¹) for the lower and higher latitude bands. These results constitute an annual minimum in flux densities for these regions, and are higher than previously reported. The existence of a latitudinal gradient in the continental radon source function is confirmed; the present estimate for Asia (−0.39 mBq m⁻² s⁻¹ per degree of latitude) is in agreement with the northern hemisphere terrestrial radon flux gradient proposed previously.     

Validation of Jason-1 Nadir Ionosphere TEC Using GEONET

The Jason-1 dual-frequency nadir ionosphere Total Electron Content (TEC) for 10-day cycles 1–67 is validated using absolute TEC measured by Japan's GPS Earth Observation Network (GEONET), or the GEONET Regional Ionosphere Map (RIM). The bias estimates (Jason–RIM) are small and statistically insignificant: 1.62 ± 9 TECu (TEC unit or 10¹⁶ electrons/m², 1 TECu = 2.2 mm delay at Ku-band) and 0.73 ± 0.05 TECu, using the along-track difference and Gaussian distribution method, respectively. The bias estimates are –3.05 ± 10.44 TECu during daytime passes, and 0.02 ± 8.05 TECu during nighttime passes, respectively. When global Jason-1 TEC is compared with the Global Ionosphere Map (GIM) from the Center for Orbit Determination in Europe (or CODE) TEC, the bias (Jason–GIM) estimate is 0.68 ± 1.00 TECu, indicating Jason-1 ionosphere delay at Ku-band is longer than GIM by 3.1 mm, which is at present statistically insignificant. Significant zonal distributions of biases are found when the differences are projected into a sun-fixed geomagnetic reference frame. The observed biases range from –7 TECu (GIM larger by 15.4 mm) in the equatorial region, to +2 TECu in the Arctic region, and to +7 TECu in the Antarctica region, indicating significant geographical variations. This phenomena is primarily attributed to the uneven and poorly distributed global GPS stations particularly over ocean and near polar regions. Finally, when the Jason-1 and TOPEX/Poseidon (T/P) TECs were compared during Jason-1 cycles 1–67 (where cycles 1–21 represent the formation flight with T/P, cycles 22–67 represent the interleave orbits), the estimated bias is 1.42 ± 0.04 TECu. It is concluded that the offset between Jason/TOPEX and GPS (RIM or GIM) TECs is < 4 mm at Ku-band, which at present is negligible.     

Collating Historic Weather Observations for the East Asian Region:Challenges,Solutions,and Reanalyses

正1.Introduction Historic instrumental weather observations,made on land or at sea from as early as the 17th century(e.g.,Camuffo et al.,2010),are integral to extending our understanding of the decadal and centennial variations of Earth’s climate and for comparison with paleo-proxy data.The potential of such data is shown to best effect when used in dynamical 4D global     

Truncated flame structures within a deposit of the Indian Ocean Tsunami: evidence of syn‐sedimentary deformation

This study reveals the three‐dimensional morphology and syn‐sedimentary formation processes of a deformation structure termed ‘truncated flame structures’ which is found in a terrestrial tsunami deposit in southern Thailand that formed during the 2004 Indian Ocean Tsunami. The structure was found at the boundary between a lower fine‐grained layer and an upper coarse‐grained layer that are related to two runup events. In order to confirm the morphology of the structure, the authors excavated two trenches and an opencast pit. When viewed in a cross‐section oriented parallel to the direction of the runup current, the deformed boundary has an irregularly bulging profile, similar to that observed in flame structures. The protruding structures are inclined towards the downstream direction of the runup current, and are truncated horizontally along their upper surface by parallel laminations in the overlying layer. When viewed in a cross‐section oriented perpendicular to the current direction, it appears that parts of the upper layer descend into the lower layer as lobate masses. In places, these masses are completely detached from the main part of the upper layer, forming circular or elliptical shapes. The contact between the lower layer and the main part of the upper layer is a planar truncation surface. Opencast excavation of the contact surface revealed that the deformed structures have flat, sinuous horseshoe crests that open in a downstream direction. It is possible for the runup current to generate shear stress such that it deforms the boundary into a truncated flame structure. Moreover, the observations made in this study indicate the syn‐sedimentary development of the structure: deformation and truncation occurred simultaneously in association with the runup current that formed the upper layer. Truncated flame structures can be used as a criterion in identifying the syn‐sedimentary deformation of substrate: the structures are indicative of unidirectional flow with sufficiently high shear velocity to deform unconsolidated substrate. As in the present case, the truncated flame structures may be characteristic of tsunami events that involve strong unidirectional currents on land due to the extraordinarily long wave period of tsunamis, rather than other events such as storm surges or flooding.     

Lateral variations in the lithology and organic chemistry of a black shale sequence on the Mesoarchean seafloor affected by hydrothermal processes: The Dixon Island Formation of the coastal Pilbara Terrane,Western Australia

The Dixon Island Formation of the coastal Pilbara Terrane, Western Australia is a 3.2 Ga volcanic–sedimentary sequence influenced by syndepositional hydrothermal activity formed in an island‐arc setting. We documented lateral variations in stratigraphy, hydrothermal alteration, and biological activity recorded in the sedimentary rocks (over several kilometers), with the aim of identifying areas of biological activity and related small‐scale structures. The Dixon Island Formation comprises volcaniclastics, black chert, and iron‐rich chert within seven tectonic blocks. Based on detailed geological mapping, stratigraphic columns, carbon isotope composition, and organic carbon (C_org) content, we found lateral (>5 km) variations in stratigraphy and carbon isotope compositions in a black chert sequence above the Mesoarchean seafloor with hydrothermal activity. Two felsic tuff layers are used as stratigraphic marker beds within a black chert sequence, which was deposited on altered volcanic rocks. The black chert sequence in each tectonic block is 10–20 m thick. Thickness variations reflect topographical undulations in the paleo‐ocean floor due to faulting. Early‐stage normal faults indicate extensional conditions after hydrothermal activity. Black chert beds in the topographically subsided area contain higher C_org contents (about 0.4 wt%) than in areas around the depression (<0.1 wt%). Carbon isotope compositions for the black chert vary from ?40 to ?25‰, which are similar to values obtained for a black chert vein within the komatiite–rhyolite tuff sequence (underlying the black chert sequence). Those for other rock types in the Dixon Island Formation are ?33 to ?15‰. Results indicate that deformation occurred soon after the final stages of hydrothermal activity. After this early‐stage deformation, organic‐rich sediments were deposited over an area several kilometers across. The organic‐rich sediments indicate stagnant anoxic conditions that resulted in the deposition of siliceous and organic matter from hydrothermal vein systems. When hydrothermal activity terminated, normal faulting occurred and organic matter was deposited from the sea surface and silica from the seafloor.     

Preface to the Special Issue: Climate Change and Variability of Tropical Cyclone Activity

Tropical cyclones(TCs) are one of the most destructive natural phenomena on Earth in terms of human-life and economic losses. It is currently a matter of prodigious public and scientific interest how TC activity has changed and will change in a warming climate. This special issue focuses on a challenging subject raised in the Intergovernmental Panel on Climate Change(IPCC) report and numerous research papers.     

Platinum–Group Minerals in Podiform Chromitite from the Kamuikotan Zone, Hokkaido, Northern Japan

Abstract: Ru–Os–Ir alloys have been found in two podiform chromitites located at the Chiroro and Bankei mines in the Sarugawa peridotite complex in the Kamuikotan zone, Hokkaido, Japan. This is the first report on the occurrence of PGM (= platinum-group minerals) from chromitites in Japan. The Ru–Os–Ir alloys most typically form polyhedra associated with other minerals (Ni–Fe alloys and heazlewoodite) in chromian spinel. The PGM are possibly pseudomorphs after some primary PGM such as laurite and are chemically highly inhomogeneous, indicating a low-temperature alteration origin. This is consistent with intense alteration (formation of serpentine, uvarovite and kämmererite) imposed on the Kamuikotan chromitites. High-temperature primary PGE (platinum–group elements)–bearing sulfides were possibly recrystallized at low temperatures into a new assemblage of PGM, Ni-Fe alloys and sulfides. Placer PGM around the peridotite complexes are chemically different from the PGM in dunite and chromitite possibly due to the, as yet, incomplete search for the rock-hosted PGM. The PGE content in chromitites is distinctly higher in those in the Kamuikotan zone than in those in the Sangun zone of Southwest Japan, consistent with the more refractory nature (Cr# of spinel, up to 0.8) of the former than the latter (Cr# of spinel, 0.5).