Hydrogeology of thermal waters in Viterbo area, central Italy

A conceptual hydrogeological model of the Viterbo thermal area (central Italy) has been developed. Though numerous studies have been conducted on its geological, geochemical and geothermal features, there is no generalized picture defining the origin and yield of the hydrothermal system. These latter aspects have therefore become the objectives of this research, which is based on new hydrogeological and geochemical investigations. The geological setting results in the coexistence of overlapped interacting aquifers. The shallow volcanic aquifer, characterized by fresh waters, is fed from the area around the Cimini Mountains and is limited at its base by the semiconfining marly-calcareous-arenaceous complex and low-permeability clays. To the west of Viterbo, vertical upflows of thermal waters of the sulphate-chloride-alkaline-earth type with higher gas contents, are due to the locally uplifted carbonate reservoir, the reduced thickness of the semiconfining layer and the high local geothermal gradient. The hot waters (30–60°C) are the result of deep circulation within the carbonate rocks (0.5–1.8 km) and have the same recharge area as the volcanic aquifer. The upward flow in the Viterbo thermal area is at least 0.1 m³/s. This flow feeds springs and deep wells, also recharging the volcanic aquifer from below.     

Reply to Comment on “Impact of groundwater withdrawals on the interaction of multi-layered aquifers in the Viterbo geothermal area (central Italy)”: report published in Hydrogeology Journal (2013) 21:1339–1353, by Antonella Baiocchi,Francesca Lotti and Vincenzo Piscopo

Hydrogeology Journal -     

Sustainable Yield of a Hydrothermal Area: From Theoretical Concepts to the Practical Approach

Sustainable use of groundwater in the hydrothermal area of Viterbo (Central Italy) was analyzed. In this area, multipurposes utilization of groundwater coexists: several thermal springs and wells supply spas and public pools, cold and fresh water is used for irrigation and drinking-water. Starting from theoretical concepts, a management plan has been developed to ensure groundwater sustainability in response to the increased demand of withdrawal from thermal wells, by integrating previous hydrogeological studies, new investigations and a new finite-difference model. The most stringent constraints considered are: to maintain the quality of thermal and fresh waters, to limit the effects on the hydraulic equilibrium existing between overlapping aquifers, to ensure a significant flow to the natural thermal springs and the quality and flow rate of the spring used for drinking purposes. The practical approach included identification of the maximum pumping rate from the wells of the spas, analysis of the response time of the system under development and drafting of a safeguard and monitoring plan. The case examined takes into account the complexity of the task in defining practical measures for groundwater management on the basis of theoretical concepts of its sustainable use. A participative approach among the different water decision-makers and adaptive management in the use of groundwater resources with different quality represent the key points to overcome conflicts between different users, with the awareness of the ineludible uncertainties of the hydrogeological model.     

Impact of groundwater withdrawals on the interaction of multi-layered aquifers in the Viterbo geothermal area (central Italy)

The impact of groundwater withdrawals on the interaction between multi-layered aquifers with different water qualities in the Viterbo geothermal area (central Italy) was studied. In this area, deep thermal waters are used to supply thermal spas and public pools. A shallow overlying aquifer carries cold and fresh water, used for irrigation and the local drinking-water supply. Starting with a conceptual hydrogeological model, two simplified numerical models were implemented: a steady-state flow model of the entire groundwater system, and a steady-state flow and heat transport model of a representative area, which included complex interactions between the aquifers. The impact of increased withdrawals associated with potential future development of the thermal aquifer must be considered in terms of the water temperature of the existing thermal sources. However, withdrawals from the shallow aquifer might also influence the discharge of thermal sources and quality of the water withdrawn from the shallow wells. The exploitation of the two aquifers is dependent on the hydraulic conductivity and thickness of the intervening aquitard, which maintains the delicate hydrogeological equilibrium. Effective methods to control this equilibrium include monitoring the vertical gradient between the two aquifers and the residual discharge of natural thermal springs.     

Influence of hydrostratigraphy and structural setting on the arsenic occurrence in groundwater of the Cimino-Vico volcanic area (central Italy)

Arsenic occurrence in groundwater near the Cimino-Vico volcanoes (central Italy) was analysed considering the hydrostratigraphy and structural setting and the shallow and deep flows interacting within the Quaternary volcanics. Groundwater is the local source of drinking water. As documented in the past, arsenic in the groundwater has become a problem, and the European maximum allowable contaminant level was recently lowered to 10 μg/L. Chemical analyses of groundwater were conducted, sampled over an area of about 900 km², from 65 wells and springs representative of the volcanic aquifer and thermal waters. Considering the type of aquifer, the nature of the aquifer formation and its substratum, the hydrochemical data highlight that the arsenic content of the groundwater is mainly connected with the hydrothermal processes in the volcanic area. Thermal waters (54–60°C) fed from deep-rising fluids show higher arsenic concentrations (176–371 μg/L). Cold waters sampled from the volcanic aquifer are characterized by a wide variability in their arsenic concentration (1.6–195 μg/L), and about 62% exceed the limit of 10 μg/L. Where the shallow volcanic aquifer is open to deep-rising thermal fluids, relatively high arsenic concentrations (20–100 μg/L) are found. This occurs close to areas of the more recent volcano-tectonic structures.     

Experiment of pumping at constant-head: an alternative possibility to the sustainable yield of a well

The effects of constant-head pumping on a well over a period of 1 year have been monitored and the results used in the research of a potential alternative for the attainment of sustainable yield. Sustainable yield is frequently related to the response of drawdown during a pumping test at constant-rate, which sometimes involves a difficult choice of conceptual model to be used to analyse the pumping results. The experiment, carried out on a well that taps a fractured aquifer in Italy, recorded the aquifer’s response to pumping, compared with the response of springs. From the trends in discharge variation with time, the period and magnitude of the recharge and the stored water volume at the beginning of the depletion period can be evaluated, and the discharge rate during the same depletion period can be predicted. A sustainable yield can be derived based on the water volume extracted during the depletion period rather than on the prediction of drawdown over a long time. The experiment also highlights the stability of water quality extracted from the well, and where this criterion is important, in some cases, the constant-head pumping can represent an alternative method of groundwater exploitation.     

Role of high-elevation groundwater flows in the hydrogeology of the Cimino volcano (central Italy) and possibilities to capture drinking water in a geogenically contaminated environment

Origin, yield and quality of the groundwater flows at high elevation in the Cimino volcano (central Italy) were examined. In this area, groundwater is geogenically contaminated by arsenic and fluoride, yet supplies drinking water for approximately 170,000 inhabitants. The origin of the high-elevation groundwater flows is strictly related to vertical and horizontal variability of the rock types (lava flows, lava domes and ignimbrite) in an area of limited size. In some cases, groundwater circuits are related to perched aquifers above noncontinuous aquitards; in other cases, they are due to flows in the highly fractured dome carapace, limited at the bottom by a low-permeability dome core. The high-elevation groundwater outflow represents about 30% of the total recharge of Cimino’s hydrogeological system, which has been estimated at 9.8 L/s/km². Bicarbonate alkaline-earth, cold, neutral waters with low salinity, and notably with low arsenic and fluoride content, distinguish the high-elevation groundwaters from those of the basal aquifer. Given the quantity and quality of these resources, approaches in the capture and management of groundwater in this hydrogeological environment should be reconsidered. Appropriate tapping methods such as horizontal drains, could more efficiently capture the high-elevation groundwater resources, as opposed to the waters currently pumped from the basal aquifer which often require dearsenification treatments.

     

Comparison of pumping at constant head and at a constant rate for determining the sustainable yield of a well

Determining the yield of a production well remains one of the main problems in hydrogeological studies. Starting from the results of a 3-year-long monitoring of a continuously exploited well functioning at constant head (i.e., at a variable discharge rate), a new pumping style has been examined using numerical models. The objective is to control the impact of pumping on the aquifer in accordance with the principle of sustainability. Different models were developed in a transient state and were calibrated using discharge data of the well during the recession periods. Successively, the trends of the residual outflow from the aquifer system with the well operating at variable discharge and at constant discharge were simulated. The results indicate that the ratio of the volume of water pumped from the well to the volume of residual outflow is a significant indicator of the sustainability of groundwater withdrawals. Modeling confirms that a constant discharge rate can be derived from the information gained through a preliminary production phase of a well at constant head. This approach appears to be particularly useful when the problem is determining the sustainable yield of a single well from aquifers with low hydraulic diffusivity.