Small hypervelocity particles captured in aerogel collectors: Location,extraction, handling and storage

Abstract— It has now been about a decade since the first demonstrations that hypervelocity particles could be captured, partially intact, in aerogel collectors. But the initial promise of a bonanza of partially‐intact extraterrestrial particles, collected in space, has yet to materialize. One of the difficulties that investigators have encountered is that the location, extraction, handling and analysis of very small (10 μm and less) grains, which constitute the vast majority of the captured particles, is challenging and burdensome. Furthermore, current extraction techniques tend to be destructive over large areas of the collectors. Here we describe our efforts to alleviate some of these difficulties. We have learned how to rapidly and efficiently locate captured particles in aerogel collectors, using an automated microscopic scanning system originally developed for experimental nuclear astrophysics. We have learned how to precisely excavate small access tunnels and trenches using an automated micromanipulator and glass microneedles as tools. These excavations are only destructive to the collector in a very small area—this feature may be particularly important for excavations in the precious Stardust collectors. Using actuatable silicon microtweezers, we have learned how to extract and store “naked” particles—essentially free of aerogel—as small as 3 μm in size. We have also developed a technique for extracting particles, along with their terminal tracks, still embedded in small cubical aerogel blocks. We have developed a novel method for storing very small particles in etched nuclear tracks. We have applied these techniques to the extraction and storage of grains captured in aerogel collectors (Particle Impact Experiment, Orbital Debris Collector Experiment, Comet‐99) in low Earth orbit.     

Relict mountain slope deposits of northern Portugal: facies,sedimentogenesis and environmental implications

This paper deals with the formation processes and the palaeoenvironmental significance of relict slope deposits located on the uppermost part of the north Portugal mountains. For this purpose, seven key sites representative of the different lithofacies have been selected and analysed in detail. The data show that three main dynamic processes are responsible for the emplacement of regional fossil slope deposits: runoff, debris flows and dry grain flows. The ubiquity of these processes and the lack of frost‐related features or landforms do not support the existence of severe Pleistocene climates in this part of the lberian Peninsula as postulated by previous work. Pedological data gathered at one of the study sites show that a subalpine environment was probably present at 700–800 m altitude between 29 and 14 kyr. Using data from the Pyrenees Mountains, a 6.5 to 12°C depression in mean annual temperature has been tentatively postulated for this Pleniglacial period. Copyright © 2003 John Wiley & Sons, Ltd.     

Long-Period Variations of the Eccentricity Vector Valid also for Near Circular Orbits around a Non-Spherical Body

This paper studies the long period variations of the eccentricity vector of the orbit of an artificial satellite, under the influence of the gravity field of a central body. We use modified orbital elements which are non-singular at zero eccentricity. We expand the long periodic part of the corresponding Lagrange equations as power series of the eccentricity. The coefficients characterizing the differential system depend on the zonal coefficients of the geopotential, and on initial semi-major axis, inclination, and eccentricity. The differential equations for the components of the eccentricity vector are then integrated analytically, with a definition of the period of the perigee based on the notion of “free eccentricity”, and which is also valid for circular orbits. The analytical solution is compared to a numerical integration. This study is a generalization of (Cook, Planet. Space Sci., 14, 1966): first, the coefficients involved in the differential equations depend on all zonal coefficients (and not only on the very first ones); second, our method applies to nearly circular orbits as well as to not too eccentric orbits. Except for the critical inclination, our solution is valid for all kinds of long period motions of the perigee, i.e., circulations or librations around an equilibrium point.     

The Somme valley terrace system (northern France); a model of river response to Quaternary climatic variations since 800,000 bp

Recent research on the Somme Valley terrace deposits, that began in 1987, has resulted in an integrated sequence of geological and geomorphological evidence for this area that is of particular significance for prehistoric investigations. This has been achieved using previous evidence and new results from archaeological and geological excavations. These include longitudinal profiles, cartography and detailed synthesis of sections of alluvial deposits, stratigraphy of river deposits and overlying loess sequences. The work, based on a study of the geometry of the terrace system, has resulted in the identification of ninestepped alluvial formations that occur along 70 km of the valley. Detailed study permits the integration of the various alluvial sequences. This suggests that each alluvial sequence results from sedimentation through a single glacial-interglacial climatic cycle. This hypothesis is confirmed by investigation of soil and loess sequences of the deposits overlying the fluvial sediments. The synthesis presented provides a basis for understanding the deposition of the terrace system and an initial chronostratigraphic interpretation for the deposits.     

Surface complexation effects on phosphate adsorption to ferric iron oxyhydroxides along pH and salinity gradients in estuaries and coastal aquifers

Non-conservative behavior of dissolved inorganic phosphate (DIP) in estuaries is generally ascribed to desorption from iron and aluminum (hydr)oxides with increasing salinity. Here, we assess this hypothesis by simulating the reversible adsorption of phosphate onto a model oxide (goethite) along physico-chemical gradients representative of surface and subsurface estuaries. The simulations are carried out using a surface complexation model (SCM), which represents the main aqueous speciation and adsorption reactions of DIP, plus the ionic strength-dependent coulombic interactions in solution and at the mineral-solution interface. According to the model calculations, variations in pH and salinity alone are unlikely to explain the often reported production of DIP in surface estuaries. In particular, increased aqueous complexation of phosphate by Mg²⁺ and Ca²⁺ ions with increasing salinity is offset by the formation of ternary Mg-phosphate surface complexes and the drop in electrical potential at the mineral-water interface. However, when taking into account the downstream decrease in the abundance of sorption sites, the model correctly simulates the observed release of DIP in the Scheldt estuary. The sharp increase in pH accompanying the admixing of seawater to fresh groundwater should also cause desorption of phosphate from iron oxyhydroxides during seawater intrusion in coastal aquifers. As for surface estuaries, the model calculations indicate that significant DIP release additionally requires a reduction in the phosphate sorption site density. In anoxic aquifers, this can result from the supply of seawater sulfate and the subsequent reductive dissolution of iron oxyhydroxides coupled to microbial sulfate reduction.     

Incidence de la cinetique de decroissance de la temperature apres le choc thermique sur les modifications d'activite des esterases et les possibilites de survie de Scolelepis (malacoceros) fuliginosa (annelide polychete)

Scolelepis fuliginosa reared in the laboratory at 13°C were put through 10-min thermal shocks at 16°C and 18°C and were then submitted to either a slow or a rapid temperature reduction. After the thermal shock, a posterior fragment of each specimen was cut off at intervals, until six days. Samples were submitted to electrophoresis on polyacrylamide gel, esterase activity being determined with α-naphthyl acetate.Enzymograms show that thermal shocks act on esterases in decreasing the activity of the main fractions. Immediate effects result in a very precocious enzymic response; more long-term effects depend on the maximum temperature, the animal's sex and the kinetics of the post-shock thermal reduction.Females are more sensitive than males. For a given Δt, esterase changes are greater and more long-lasting. After a 16°C Δt, a rapid decrease in temperature prevents the loss of activity of the middle and fast fractions in males and delays, by about 10 h, the alteration of female esterases. After 18°C ΔT, loss of activity of the middle and fast fractions occurs in less than 1 h, independently of the thermal kinetics, but survival is only possible—solely for males—with a rapid decrease in temperature which also delays females' deaths by between 24 and 48 h.In conclusion, a rapid decrease in temperature gives organisms a better resistance to thermal shock, as determined by esterase activity and controls the lethality of a high Δt.     

Authigenic carbonates from methane seeps of the Congo deep-sea fan

Submersible investigations with the ROV Victor 6000 of some pockmark structures on the seafloor of the Congo deep-sea fan have shown that they are active venting sites of methane-rich fluids, associated with abundant fauna and carbonate crusts. Moreover, methane hydrates have been observed both outcropping and deep in the sediments in the centre of the “Regab” giant pockmark. Authigenic carbonates, mostly calcite sometimes mixed with aragonite, are cementing the sedimentary matrix components and fauna; diatoms are abundant but only as moulds, indicating that biogenic silica dissolution occurred in situ synchronous with carbonate precipitation. The occurrence of diagenetic barite and pyrite in some carbonate crusts demonstrates that they can be formed either within the sulphate/methane transition zone or deeper in sulphate-depleted sediments. The oxygen isotopic compositions of the diagenetic carbonates (3.17–6.01‰ V-PDB) indicate that precipitation occurred with bottom seawater mixed with a variable contribution of water from gas hydrate decomposition. The very low carbon isotopic compositions of the diagenetic carbonates (−57.1 to −27.75‰ V-PDB) demonstrate that carbon derives mostly from the microbial oxidation of methane.     

The hydrogen balmer lines and the structure of the quiet solar chromosphere

Spectra of Hα, Hβ and Hδ have been taken under good seeing conditions with the vacuum tower telescope of Sacramento Peak Observatory. Intensity curves are given at various wavelengths in these lines to permit further comparison with a theoretical model. Moreover, considering in each case the range of height in which the lines are almost optically thin and using a few approximations, the following results are derived: between 2000 and 6000 km above the limb the average thermal + turbulent velocity of the atoms is found to increase from 20 km s^?1 to 30 km s^?1 and the mean number of hydrogen atoms per cm³ in level 2 is given by $$\log n_2 {\text{ = }}4.5{\text{ }} - {\text{ 0}}{\text{.00056(}}z - 2000)$$ z being the altitude above the limb in km. For line profile computations a new interpolation formula is presented; it gives good profiles with a small number of scans, saving microphotometer time.     

Multi-stage mixing in subduction zones: Application to Merapi volcano (Java island, Sunda arc)

Many studies have argued for the contribution of at least three components, namely the mantle wedge, the subducted oceanic crust, and its sediment cover, to describe the geochemistry of island arc volcanics. However, isotope correlations reflecting a simple binary mixing can be observed at the scale of a single arc island or volcano. Here we investigate the possibility that these trends reflect pseudo-binary mixing relationships in a three-component system. We present a simplified, two-stage model for the systematic isotope modelling of a cogenetic suite of arc lavas. This includes metasomatism of portions of the mantle wedge by hydrous phases released from the down-going oceanic crust, and sediments, followed by progressive mixing and melting. A consequence of this model is that it leads to a two end-member mixing process from the mantle wedge, oceanic crust, and sediment components. To solve the model we reduce it to a step-by-step procedure combined with a Monte-Carlo simulation. The procedure consists of: (i) producing a large number of random values on each variable of the model; (ii) using the computed values to calculate the isotopic compositions of lavas; and (iii) comparing the obtained isotopic compositions with measured data. Applied to a new set of Sr, Nd, and Pb isotope data for volcanics (basalts, basaltic andesites, trachybasalts, and basaltic trachyandesites) from Merapi volcano (Java island, Sunda arc), the model successfully reproduces the binary mixing relationships previously documented for the medium-K and high-K lava series from this volcano, thus giving further support to the hypothesis that this distinction is inherited from the primary magmas and primarily reflects a property of the mantle source. The results allow identification of a set of numerical values for bulk partition coefficients (solid/hydrous fluid, and solid/H₂O-rich melt) and variables (e.g., the mass ratio between the metasomatizing phase and the mantle wedge), which can be used for quantitative arc-lava petrogenetic calculations. They also require a direct relationship between dehydration of the slab and melting of the metasomatized mantle wedge. Finally, our evaluation shows that for isotope modelling of the Merapi lavas, the two-stage procedure is controlled more by the considered source components (mantle wedge, oceanic crust, sediments, and their derivatives) than by the various processes involved (dehydration, melting, and mixing).