A thermodynamic model for Fe–Mg dioctahedral K white micas using data from phase-equilibrium experiments and natural pelitic assemblages

The purpose of this study is to derive a solid-solution model for potassic white micas (KWM) encountered in rocks of various bulk compositions, over a wide range of P-T conditions. A compilation of phengite compositions lead us to propose a seven-thermodynamic-component (muscovite, Fe²⁺-Al-celadonite, Mg-Al-celadonite, annite, phlogopite, pyrophyllite and paragonite) ionic solid-solution model which accounts for the Tschermak, Fe-Mg, di/trioctahedral, pyrophyllitic and paragonitic substitutions observed in nature. A four-site mixing model with symmetric Margules parameters to model the Tschermak substitutions, asymmetric Margules parameters to model the other substitutions, and ideal intersite interaction has been adopted. In contrast to previous models, the relevant thermodynamic data and solid-solution properties are calibrated with independent sets of published experiments conducted for the KMASH, KFASH, KFMASH, and KNASH systems, as well as about 200 natural data involving KWM assemblages. The constraints span a wide range of pressure and temperature conditions (150 to 750 °C, 0.5 to 30 kbar), so that our model does not need to be extrapolated outside the calibration range to be used for P-T thermobarometric purposes. The calculated thermodynamic data are interconsistent with the TWQ thermodynamic database and solid-solution models, including that recently published for chlorites.     

First Multi‐Isotopic (Pb‐Nd‐Sr‐Zn‐Cu‐Fe) Characterisation of Dust Reference Materials (ATD and BCR‐723): A Multi‐Column Chromatographic Method Optimised to Trace Mineral and Anthropogenic Dust Sources

Atmospheric dust is an integral component of the Earth system with major implications for the climate, biosphere and public health. In this context, identifying and quantifying the provenance and the processes generating the various types of dust found in the atmosphere is paramount. Isotopic signatures of Pb, Nd, Sr, Zn, Cu and Fe are commonly used as sensitive geochemical tracers. However, their combined use is limited by the lack of (a) a dedicated chromatographic protocol to separate the six elements of interest for low‐mass samples and (b) specific reference materials for dust. Indeed, our work shows that USGS rock reference materials BHVO‐2, AGV‐2 and G‐2 are not applicable as substitute reference materials for dust. We characterised the isotopic signatures of these six elements in dust reference materials ATD and BCR‐723, representatives of natural and urban environments, respectively. To achieve this, we developed a specific procedure for dust, applicable in the 4–25 mg mass range, to separate the six elements using a multi‐column ion‐exchange chromatographic method and MC‐ICP‐MS measurements.     

A Raman spectroscopic study of shocked single crystalline quartz

We have carried out a Raman Spectroscopic study of single crystalline quartz samples shocked to peak pressures up to 31.4GPa. Samples shocked to above 22 GPa show shifts in peak positions consistent with the quartz being under tensile stress, and new broad bands associated with the formation of high density SiO₂ glass appear in the spectra. These changes are accompanied by an increase in the lattice parameters of the quartz. Formation of the diaplectic glass could be due to a metastable melting event, or spinodal lattice collapse on attainment of a mechanical stability limit of crystalline quartz, as suggested by previous studies of pressure-induced amorphization in static pressurization experiments on SiO₂ and GeO₂ polymorphs.     

A 3 km atmospheric boundary layer on Titan indicated by dune spacing and Huygens data

Some 20% of Titan’s surface is covered in large linear dunes that resemble in morphology, size and spacing (1-3 km) those seen on Earth. Although gravity, atmospheric density and sand composition are very different on these two worlds, this coincident size scale suggests that the controlling parameter limiting the growth of giant dunes, namely the boundary layer thickness (Andreotti et al., 2009). Nature, 457, 1120-1123], is similar. We show that a ∼3 km boundary layer thickness is supported by Huygens descent data and is consistent with results from Global Circulation Models taking the distinctive thermal inertia and albedo of the dune sands into account. While the boundary layer thickness on Earth controlling dunes can vary by an order of magnitude depending on the proximity of oceans, which have very different thermal properties from dry land, the relative invariance of dune spacing on Titan is consistent with relatively uniform thermal properties near the dunes and no prominent variation with latitude is seen.     

Seasonal cycle and mass balance of cadmium in an estuary with an agricultural catchment: The Morlaix River estuary (Brittany,France)

Cadmium (Cd) variations were investigated over an annual cycle (12 surveys between February 1998–January 1999) in the Morlaix estuary (Brittany, France) in both the water column and the benthic compartment in relation to hydrological conditions. The drainage basin of the Morlaix River estuary is predominantly agricultural in character. Dissolved Cd concentrations in the water column varied from 0.04 to 0.48 nM. Particulate Cd concentrations ranged from 1 to 64 nmol g⁻¹. These concentrations reach levels commonly observed in estuaries affected by heavy industrial activities. Extensive agricultural activities in the drainage basin may be responsible for Cd levels above pristine conditions. Metal concentrations varied significantly over the seasonal cycle and the dissolved fraction exhibited high values in summer months. Particulate concentrations were always lowest during this season. In the benthic compartment, Cd concentrations in surface sediment varied from 0.4 to 5.0 nmol g⁻¹ and from 0.2 to 5.0 nM in porewaters. Concentrations in sediment were slightly affected by Cd contamination and temporal changes were important over the seasonal cycle. The variations seem to be controlled by the succession of sedimentation and erosion processes, which are tightly linked to seasonal changes in river discharge. A box model was constructed based on known Cd sources and sinks in the estuary. Cd is chiefly brought into the estuary by the Morlaix River and accumulates within the estuary. The accumulation within the estuary represents from 6.3 to 7.2 kg yr⁻¹.     

Cathodoluminescence petrography and isotope geochemistry of KT impact ejecta deposited 360 km from the Chicxulub crater, at Albion Island, Belize

The depositional and diagenetic history of Cretaceous–Tertiary (KT) impact ejecta deposited 360 km from the Chicxulub crater, at Albion Island, Belize, has been investigated using integrated cathodoluminescence and isotopic analyses. A quarry exposes 26 m of Upper Cretaceous Barton Creek Formation dolomitized marine limestone overlain by 16 m of dolomitized Albion Formation impact ejecta. The Albion Formation consists of a lower fine‐grained ≈1‐m‐thick spheroid bed and an upper 15‐m‐thick coarse conglomeratic diamictite bed. A 14‐event paragenetic sequence has been documented and used as a temporal framework to interpret chemostratigraphic trends in bulk rock δ¹⁸O, δ¹³C and ⁸⁷Sr/⁸⁶Sr. The uppermost surface of the Barton Creek Formation was subaerially exposed before the KT impact, as indicated by a brecciated palaeosol that caps upsection decreases in δ¹³C and δ¹⁸O. Small 1‐cm‐diameter spheroids in the spheroid bed exhibit vermicular crystalline textures but lack the concentric zonations common to accretionary lapilli. These spheroids are hypothesized originally to have been impact glass or reactive Ca and Mg oxide dusts that adhered to water vapour particles condensing from the cooling impact vapour cloud. The spheroids were dolomitized soon after deposition. The earliest dolomitization in the matrix sediments of the Albion Formation was also post‐depositional, replacing clays formed by devitrification of impact glass. Dolomite and clay ⁸⁷Sr/⁸⁶Sr exhibit a distinct symmetrical distribution in the spheroid bed ranging from 0·707745 to 0·707872. Although unproven, this may represent primary changes in the chemical composition of the impact glass. The limestone clasts in the diamictite bed were dolomitized before the KT impact and exhibit upsection decreases in bulk rock ⁸⁷Sr/⁸⁶Sr. This suggests that the clasts were excavated from strata equivalent in age or older than the Barton Creek Formation at locations closer to, or in, the Chicxulub crater.     

6. Environmental Context

On Earth, the Archaean aeon lasted from 4.0 to 2.5 Ga; it corresponds to a relatively stable period. Compared with today, internal Earth heat production was several times greater resulting in high geothermal flux that induced the genesis of rocks such as komatiites and TTG suites, which are no more generated on Earth since 2.5 Ga. Similarly, the details of plate tectonic modalities (plate size, plate motion rate, plate thickness, tectonic style, irregular crustal growth, etc...) were different of modern plate tectonics. Both atmosphere and ocean compositions have been progressively modified and the greater heat production favoured the development of hydrothermalism and therefore created niches potentially favourable for the development of some forms of life. Catastrophic events such as giant meteorite falls or world-sized glaciations drastically and suddenly changed the environment of Earth surface, thus being able to strongly affect development of life. Even if specialists still debate about the age of the oldest indubitable fossil trace of life, Archaean can be considered as having been extremely favourable for life development and diversification.     

Using Lead Isotopes to Determine Pottery Provenance in Cyprus: Clay Source Signatures and Comparison with Late Bronze Age Cypriote Pottery

This paper presents the lead isotopic composition of potential clay sources for pottery production, collected in the four major geological zones of Cyprus (Troodos Ophiolite, Circum Troodos Sedimentary Succession, Mamonia Terrane, Kyrenia Terrane) and evaluates its usefulness in Cypriote pottery provenance studies. The clay isotopic signatures from the four zones are compared to each other and to the isotopic composition of various utilitarian pottery wares from three Late Bronze Age sites, respectively located in southern Cyprus (Alassa‐Pano Mandilaris), east Cyprus (Enkomi), and southeast Cyprus (Hala Sultan Tekke). It also explores the potential of this method to better discriminate between potential raw materials used for the production of Base‐ring ware, one of the most characteristic fine pottery of Late Bronze Age Cyprus, which was widely spread in the Eastern Mediterranean (Courtois, 1981; Vaughan, 1991, 1994). Results show that three main lead isotopic fields can be distinguished among the Cypriote clay sources and the comparison of Plain sherds with the clay sources allows discrimination between local products and imports. They also clearly indicate that all the Base‐ring sherds analyzed in this study were made of the clays from the Kathikas Formation that crops out in only limited parts of southwest Cyprus.     

Tourism impacts on benthic communities of sandy beaches

This study evaluated the effect of human trampling on the benthic macrofauna of two beaches in Southeast Brazil with different levels of intensity of tourism, Grussaí (more impacted) and Manguinhos (less impacted), during periods of high and low tourism activity. The macrofauna of urbanized (U) and non‐urbanized (NU) sectors of the inter‐tidal zone was sampled and the number of visitors was recorded. General linear models revealed a decreasing in abundance of macrofauna species in the urbanized sectors of analyzed beaches, which are exposed to higher trampling impact than in non‐urbanized areas. At Manguinhos Beach, trampling did not affect the macrofauna (<1 visitors ? m^?²), except for the polychaete Scolelepis sp., which was less abundant in the U sector. Considering the benthic community, Atlantorchestoidea brasiliensis, Hemipodia californiensis and Scolelepis sp. were more sensitive to human trampling pressure and may be used as potential bioindicators of tourism impact. Management plans should consider mitigation of the effects of tourism, such as the control of the visitor number and their decentralization.