A model for the viscosity of rhyolite as a function of H2O-content and pressure: A calibration based on centrifuge piston cylinder experiments

The Newtonian viscosity of synthetic rhyolitic liquids with 0.15-5.24 wt% dissolved water was determined in the interval between 580 and 1640 °C and pressures of 1 atm and 5-25 kbar. Measurements were performed by combining static and accelerated (up to 1000g) falling sphere experiments on water-bearing samples, with high temperature concentric cylinder experiments on 0.15 wt% H₂O melts. These methods allowed viscosity determinations between 10² and 10⁷ Pa s, and cover the complete range of naturally occurring magmatic temperatures, pressures, and H₂O-contents for rhyolites.Our viscosity data, combined with those from previous studies, were modeled by an expression based on the empirical Vogel-Fulcher-Tammann equation, which describes viscosities and derivative properties (glass transition temperature T_g, fragility m, and activation volume of viscous flow Va) of silicic liquids as a function of P-T-X_(H2O). The fitted expressions do not account for composition-dependent parameters other than X_(H2O) and reproduce the entire viscosity database for silicic liquids to within 3.0% average relative error on log η (i.e. std. error of estimate of 0.26 log units).The results yield the expected strong decrease of viscosity with temperature and water content, but show variable pressure dependencies. Viscosity results to be strongly affected by pressure at low pressures; an effect amplified at low temperatures and water contents. Fragility, as a measure for the deviation from Arrhenian behavior, decreases with H₂O-content but is insensitive to pressure. Activation volumes are always largely negative (e.g., less than −10 cm³/mol) and increase strongly with H₂O-content. Variations in melt structure that may account for the observed property variations are discussed.     

δO of carbonate, quartz and phosphate from belemnite guards: implications for the isotopic record of old fossils and the isotopic composition of ancient seawater

Belemnite guards of Cretaceous and Jurassic age were found to contain varying amounts of quartz deposited both on the external surface and inside the rostrum. The oxygen isotopic composition of coexisting carbonate, quartz and phosphate from the same rostrum was measured according to well-established techniques. None of these compounds showed isotopic values in equilibrium with one another. Assuming δ¹⁸O values of the diagenetic water within the range of meteoric waters, the δ¹⁸O(SiO₂) yield temperatures in agreement with the apparent secondary origin of this phase. The δ¹⁸O(CO₃²⁻) range, with a certain continuity, between −10.8 and +0.97 PDB-1 with most of the intermediate values being within the range of the carbonate isotopic values of Mesozoic fossils. The most positive isotopic results obtained from phosphate are close to +23/+24‰ (V-SMOW). They can hardly be related to a secondary origin of the phosphate, or to the presence of diagenetic effects, since these results are among the most positive ever measured on phosphate. As far as we know there is no widespread diagenetic process determining an ¹⁸O enrichment of phosphate. The very low concentration of phosphate did not allow the determination of its mineralogical composition. All the available δ¹⁸O(PO₄³⁻) values from belemnite and non-belemnite fossils of marine origin of Tertiary and Mesozoic age are reported along with the newly measured belemnites. The following conclusions may be drawn from the data reported: (1) the pristine oxygen isotope composition of fossil marine organisms (either carbonate or phosphate) may easily undergo fairly large changes because of oxygen isotope exchange processes with diagenetic water; this process is apparent even in the case of geologically recent fossils; (2) the δ¹⁸O(PO₄³⁻) of belemnite rostra seems to be, at least in the case of the most positive results, in isotopic equilibrium with environmental water because of the similarity between the results from Cretaceous belemnites and the results from Cretaceous and Lower Tertiary pelecypods and fish teeth; 3) if so, the only feasible interpretation that can be suggested for the ¹⁸O enriched data is the possibility of a relatively large variation of the oxygen isotopic composition of ocean paleowater from Jurassic to recent time.     

Pumpellyite in Low-grade Metamorphism

The regional metamorphism of the Kant? Mountains in Japan producedrocks of the following facies, with rising temperature: chloritefacies, pumpellyite-chlorite facies, glauco-phane-schist facies,and greenschist facies. This relationship is compared with theprogressive metamorphic zones in other regions where pumpellyitehas been found. Almost similar relations appear to hold in manymetamorphic terrains. Pumpellyites in glaucophanitic metamorphicterrains have, generally, low Fe'/R'R ratios. Physical andchemical conditions responsible for the formation of pumpellyiteare also discussed.     

Fluid inclusion studies of the Abawso gold prospect,near the Ashanti Belt,Ghana

The major Ghanaian lode gold deposits are preferentially aligned along the western and eastern contacts of the Kumasi Basin with the Ashanti and Sefwi Belts, respectively. The investigated area of the Abawso small-scale concession, covering the workings of the old Ettadom mine, is situated 3 km west of the lithological contact of the Birimian metavolcanic rocks of the Akropong Belt in the east with the Birimian metasedimentary rocks of the Kumasi Basin in the west. The rocks of the Abawso concession represent a steeply NW-dipping limb of a SE-verging anticline with an axis plunging to the SW. Quartz veining occurs predominantly in the form of en échelon dilatational veins along NNE–SSW-striking shear zones of a few metres width and shows evidence of brittle and ductile deformation. Also stockwork-style quartz veining occurs in the vicinity of the main shaft of the old Ettadom mine. Hydrothermal alteration includes sericitisation, sulphidation and locally carbonatisation. The auriferous quartz veins mainly follow the trend of brittle to ductile deformed quartz veins; however, some occur in stockwork. Fluid inclusion studies reveal a large number of H₂O inclusions along intragranular trails in auriferous quartz vein samples, as well as an overall dominance of H₂O and H₂O-CO₂ inclusions over CO₂ inclusions. Textural observations and physico-chemical fluid inclusion properties indicate post-entrapment modifications for all quartz vein samples due to grain boundary migration recrystallisation. This process is interpreted to be responsible for the generation of the CO₂ inclusions from a H₂O-CO₂ parent fluid. In comparison with mineralisation at the Ashanti and Prestea deposits, which are characterised by CO₂±N₂ inclusions, the observed inclusion assemblage may be due to a shallower crustal level of mineralisation, or different degrees and styles of recrystallisation, or a less pronounced development of laminated quartz veins due to comparably restricted pressure fluctuations. Furthermore, the microthermometric observations allow the reconstruction of a possible retrograde P-T path, depicting near-isothermal decompression in the P-T range of the brittle/ductile transition.Editorial handling: E. Frimmel     

Kinetics and Equilibrium Sorption Studies of 4-Nitrophenol on pyrolyzed and activated oil shale residue

Sorption of the organic pollutant 4-nitrophenol (4-NP) by pyrolyzed and activated Jordanian oil-shale was studied. Pyrolyzed oil shale was prepared using a fluidized bed reactor at 520 °C in the presence of nitrogen. Physical activation was carried out by treating the pyrolyzed oil shale with CO₂ at 830 °C, while chemical activation was achieved by using KOH and ZnCl₂ as impregnating agents. Batch kinetics and isotherm studies were conducted to evaluate the sorption process. Effects of contact time, initial sorbate concentration, sorbent concentration, temperature, pH and inorganic salts (NaCl and KCl) on the sorption process by the different sorbents were considered. Chemically activated oil shale, pretreated with ZnCl₂, gave the highest uptake of 4-NP. The isotherm experimental data fit reasonably well to Langmuir, Freundlich and Redlich-Paterson models. Three kinetic models, namely the Morris-Weber, Lagergren, and Pseudo-Second-Order model (PSOM), were applied to represent the experimental results for both pyrolyzed and ZnCl₂-oil shale sorbents.     

Investigations and assessment of the landslide hazards of Fengdu county in the reservoir region of the Three Gorges project on the Yangtze River

The spatial database of landslides in Fengdu County of the reservoir region of the Three Gorges project (TGP) on the Yangtze River was compiled from a variety of different sources including field investigations on landslides, existing catalogues and archives on landslides, reports of meteorological events and human engineering activities that triggered slope failures. The major factors that are found to have affected the slope stabilities are outlined, and an assessment and zonation of landslide hazards of the region is made using an integrated information model, which is divided into destructive, disastrous, likely disastrous and essentially non-disastrous areas from the assessment of landslide hazards. The destructive and disastrous areas are respectively 1.9 and 13.8% of the total region, mostly being nearby townships, highways along the south bank of the Yangtze River and residential quarters along two flanks of the Yangtze River and its distributaries, that will impose direct impact to highway transportation and residential lives, and may effect to some degree the navigation of the Yangtze River, reservoir banks, and building of cities and towns.