Probabilistic seismic hazard analysis of Kahramanmaras Province,Turkey

Kahramanmaras and its surroundings are under the influence of East Anatolian and Dead Sea fault zones which have significance in the tectonics of Turkey. The long-term energy accumulation in these zones creates a very high risk level in terms of seismic hazard. In this study, the seismic hazard of Kahramanmaras Province and its vicinity was tried to be determined by using the probabilistic seismic hazard method approach. The earthquake catalog used in the study comprises 424 earthquakes equal or greater than M _w ?=?4.0, covering a time period between 1 January 1900 and 1 January 2015. The earthquake data have been compiled from the catalogs of the International Seismological Center (ISC), Republic of Turkey Prime Ministry Disaster and Emergency Management Precidency (RTPMDEMP), Bogazici University Kandilli Observatory and Earthquake Research Institute. Seismic sources that could affect the study area have been identified according to the Earthquake Model of the Middle East (EMME). Seismic hazard parameters and peak horizontal acceleration values were obtained by using the selected attenuation relationships, and the results were given with iso-acceleration maps corresponding to a recurrence period of 475 years. The calculated peak horizontal acceleration values are generally varying between 0.21 and 0.41 in the study area. The result of this study shows that the southeastern parts of the study area have a greater seismic hazard compared with other parts.     

Novel fusion approach on automatic object extraction from spatial data: case study Worldview-2 and TOPO5000

The automatic extraction of information content from remotely sensed data is always challenging. We suggest a novel fusion approach to improve the extraction of this information from mono-satellite images. A Worldview-2 (WV-2) pan-sharpened image and a 1/5000-scaled topographic vector map (TOPO5000) were used as the sample data. Firstly, the buildings and roads were manually extracted from WV-2 to point out the maximum extractable information content. Subsequently, object-based automatic extractions were performed. After achieving two-dimensional results, a normalized digital surface model (nDSM) was generated from the underlying digital aerial photos of TOPO5000, and the automatic extraction was repeated by fusion with the nDSM to include individual object heights as an additional band for classification. The contribution was tested by precision, completeness and overall quality. Novel fusion technique increased the success of automatic extraction by 7% for the number of buildings and by 23% for the length of roads.     

Effect of attachment configuration on the trapping efficiency of Vaseline-coated slide catchers for windblown particles

There are various types of the windblown sediment traps developed for wind tunnel and field studies. One of the main supports expected from these traps is in measuring surface dust concentrations to appropriately derive flux equations. The measurement performance and accuracy of a trap is very important and depends strictly upon the physical characteristics and the behaviors of dust grains with air flows. This paper presents the measurement results of static pressure distribution (SPD) of wind flow around Vaseline-coated slide (VCS) catchers with an aim of finding out whether or not particle trapping efficiency (η) of the VCS is related to the SPD. The SPD was evaluated by a wind reduction coefficient (R _c) in a series of wind tunnel experiments with different VCS settings which have different attachment configurations on a pole. Three VCS configurations were considered: a configuration on a circular plastic pole (CPP) and two configurations on wooden square poles (WSP₁ and WSP₂, respectively). Thus, the primary contribution of this work was to experimentally analyze the effect of the different attachment configurations on the SPD, and the secondary objective was to determine the effect of the SPD on the η. It was shown that spatial correlation and spatial pattern of the R _c were different in the surrounding area of each configuration, and ANOVA and DUNCAN tests indicated that η(s) of WSP₁, WSP₂, and CPP were different at the significant level of P ≤ 0.05 with the mean of 0.94 ± 0.09, 0.63 ± 0.14, and 1.13 ± 0.07, respectively. Additionally, the amount of PM₂₀, PM₄₀, PM₆₀, PM₈₀, and PM₁₀₀ trapped by the configurations of WSP₁, WSP₂, and CPP considerably varied depending upon the particular aerodynamic circumstances associated with every configuration.     

Evaluation of Gravity and Aeromagnetic Anomalies for the Deep Structure and Possibility of Hydrocarbon Potential of the Region Surrounding Lake Van,Eastern Anatolia,Turkey

The North Anatolian Fault (NAF) is not observed on the surface beyond 40 km southeast of Karliova town toward the western shoreline of Lake Van. Various amplitudes of gravity and aeromagnetic anomalies are observed around the lake and surrounding region. In the gravity anomaly map, contour intensity is observed from the north of Mus city center toward Lake Van. There is a possibility that the NAF extends from here to the lake. Because there is no gravity data within the lake, the extension of the NAF is unknown and uncertain in the lake and to the east. Meanwhile, it is observed from the aeromagnetic anomalies that there are several positive and negative amplitude anomalies aligned around a slightly curved line in the east–west direction. The same curvature becomes much clearer in the analytic signal transformation map. The volcanic mountains of Nemrut and Suphan, and magnetic anomalies to the east of the Lake Van are all lined up and extended with this slightly curved line, provoking thoughts that a fault zone that was not previously mapped may exist. The epicenter of the major earthquake event that occurred on October 23, 2011 is located on this fault zone. The fault plane solution of this earthquake indicates a thrust fault in the east–west direction, consistent with the results of this study. Volcanic mountains in this zone are accepted as still being active because of gas seepages from their calderas, and magnetic anomalies are caused by buried causative bodies, probably magmatic intrusions. Because of its magmatic nature, this zone could be a good prospect for geothermal energy exploration. In this study, the basement of the Van Basin was also modelled three-dimensionally (3D) in order to investigate its hydrocarbon potential, because the first oil production in Anatolia was recorded around the Kurzot village in this basin. According to the 3D modelling results, the basin is composed of three different depressions aligned in the N–S direction and many prospective structures were observed between and around these depressions where the depocenter depths may reach down to 10 km.     

Crustal Structure of Turkey from Aeromagnetic, Gravity and Deep Seismic Reflection Data

In this paper, aeromagnetic and gravity anomalies obtained from the General Directorate of Mineral Research and Exploration were subjected to upward continuation to 3?km from the ground surface to suppress shallow effects and to expose only regional, deep sources. Then, a reduction to pole (RTP) map of aeromagnetic anomalies was produced from the 3?km upward continued data. A sinuous boundary to the south of Turkey is observed in the RTP map that may indicate the suture zone between the Anatolides and African/Arabian Plates in the closure time of the Tethys Ocean. The sinuous boundary can be correlated with the recent palaeo-tectonic maps. The southern part of the sinuous boundary is quite different and less magnetic in comparison with the northern block. In addition, maxspots maps of the aeromagnetic and gravity anomalies were produced to find out and enhance the boundaries of tectonic units. Crustal thickness, recently calculated and mapped for the western Turkey, is also extended to the whole of Turkey, and the crustal thicknesses are correlated with the previous seismological findings and deep seismic sections. The average crustal thickness calculations using the gravity data are about 28?km along the coastal regions and increase up to 42?km through the Iranian border in the east of Turkey. Density and susceptibility values used as parameters for construction of two-dimensional (2D) gravity and magnetic models were compiled in a table from different localities of Turkey. 2D models indicate that all of the anomalous masses are located in the upper crust, and this could be well correlated with the earthquakes which occurred at shallow depths.     

Removal of Organochlorine Pesticides from Aqueous Solution by Using Neutralized Red Mud

This work describes the potential usability of neutralized red mud for the removal of organochlorine pesticides (OCPs) from aqueous solutions. After examination on the adsorption capability of neutralized red mud for all studied OCPs, the experiments were performed by employing aldrin as a model compound. The effect of several parameters, such as contact time, pH of the solution, initial aldrin concentration, and dosage of the adsorbent was evaluated by batch experiments. The determination of OCPs was carried out using traditional liquid–liquid extraction followed by a GC coupled with µ‐electron capture detector (GC‐µECD). The results showed that adsorption equilibrium time depended upon the initial aldrin concentration and adsorption followed the second‐order kinetic model. Kinetic study also indicated that the film diffusion mechanism was a main rate control mechanism. The removal was explained by considering the electrostatic interactions between metal oxides surface of the neutralized red mud and inductively charged centers (negative charge (d?) of chlorine atoms and positive charge (d+) of π‐cloud aromatic ring) of the aldrin molecules. In comparison to the Langmuir isotherm model, the Freundlich model better represented the adsorption data. The neutralized red mud was also succesfully employed for the removal of OCPs from real water samples, including tap water and surface (lake) water, fortified with studied OCPs.     

Use of USLE/GIS technology integrated with geostatistics to assess soil erosion risk in different land uses of Indagi Mountain Pass—Çankırı, Turkey

The universal soil loss equation (USLE) is an erosion model to estimate average soil loss that would generally result from splash, sheet, and rill erosion from agricultural plots. Recently, use of USLE has been extended as a useful tool predicting soil losses and planning control practices by the effective integration of the GIS-based procedures to estimate the factor values on a grid cell basis. This study was performed for five different lands uses of Indağı Mountain Pass, Cankırı to predict the soil erosion risk by the USLE/GIS methodology for planning conservation measures in the site. Of the USLE factors, rainfall-runoff erosivity factor (USLE-R) and topographic factor (USLE-LS) were greatly involved in GIS. These were surfaced by correcting USLE-R site-specifically using DEM and climatic data and by evaluating USLE-LS by the flow accumulation tool using DEM and watershed delineation tool to consider the topographical and hydrological effects on the soil loss. The study assessed the soil erodibility factor (USLE-K) by randomly sampled field properties by geostatistical analysis. Crop management factor for different land-use/land cover type and land use (USLE-C) was assigned to the numerical values from crop and flora type, canopy and density of five different land uses, which are plantation, recreational land, cropland, forest and grassland, by means of reclassifying digital land use map available for the site. Support practice factor (USLE-P) was taken as a unit assuming no erosion control practices. USLE/GIS technology together with the geostatistics combined these major erosion factors to predict average soil loss per unit area per unit time. Resulting soil loss map revealed that spatial average soil loss in terms of the land uses were 1.99, 1.29, 1.21, 1.20, 0.89 t ha⁻¹ year⁻¹ for the cropland, grassland, recreation, plantation and forest, respectively. Since the rate of soil formation was expected to be so slow in Central Anatolia of Turkey and any soil loss of more than 1 ton ha⁻¹ year⁻¹ over 50–100 years was considered as irreversible for this region, soil erosion in the Indağı Mountain Pass, to the great extent, attained the irreversible state, and these findings should be very useful to take mitigation measures in the site.     

Polycyclic aromatic hydrocarbons, polychlorinated biphenyls and organochlorine pesticides in urban air of Konya, Turkey

Polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were determined in urban air samples of Konya, Turkey between August 2006 and May 2007. The concentrations of pollutants in both the gas and particulate phase were separately analysed. The average total (gas + particulate) concentrations of PAHs, PCBs and OCPs were determined as 206 ng m^− 3, 0.106 ng m^− 3, 4.78 ng m^− 3 respectively. All of the investigated target compounds were dominantly found in the gas phase except OCPs. Higher air concentrations of PAHs were found at winter season while the highest concentrations of PCBs were determined in September. The highest OCPs were detected in October and in March. In urban air of Konya, PCB 28 and PCB 52 congeners represent 46% and 35% of total PCBs while Phenanthrene, Fluoranthene, Pyrene accounted for 29%, 13%, 10% of total PAHs. HCH compounds (α + β + γ + δ-HCH), total DDTs (p,p′-DDE, p,p′-DDD, p,p′-DDT), Endosulfan compounds (Endosulfan I, Endosulfan II, Endosulfan sulfate) were dominantly determined as 30%, 21%, 20% of total OCPs respectively. Considering the relation between these compounds with temperature, there was no significant correlation observed. Despite banned/restricted use in Turkey, some OCPs were determined in urban air. These results demonstrated that they are either illegally being used in the course of agricultural activity and gardens in Konya or they are residues of past use in environment. According to these results, it can be suggested that Konya is an actively contributing region to persistent organic pollutants in Turkey.     

Three mathematical comminution models based on strain energy

A parameter of interest in the theory of comminution is the energy absorbed per unit new surface produced, erg cm^?2. Naturally this unit has a certain relation to the strain energy per unit volume of the solid at fracture. Unit new surface energy is calculated from three mathematical models: the first two under static loading and the third under dynamic loading assuming fracture by tensile stresses.The average physical characteristics of limestone, quartz, calcite and glass which are found in the literature are used in the formulas of these three mathematical models. The calculated values of the new surface energies from these models are compared with experimental and theoretical values.The values from these models are reasonably close to those from the experiments, consequently there is the possibility of application of these models in practice.     

Early Tertiary epithermal gold mineralization, Bahcecik prospect, northeastern Turkey

The Bahcecik prospect is located in the eastern Pontide tectonic province of the eastern Black Sea region of Turkey. It is one of the first low sulfidation epithermal systems to be described from this area of Turkey. Gold mineralization occurred within Late Cretaceous to early Tertiary volcanic rocks and is localized along east-trending normal faults and lithologic contacts. An early quartz–sericite alteration event was focused along the major fault in the area and resulted in precipitation of arsenian (?) pyrite with anomalous gold. A later, more spatially extensive, advanced argillic alteration event overprinted the quartz–sericite event. Native gold was precipitated during this event as disseminations and fracture fillings in quartz. Gold mineralization is restricted to the high-temperature portion of the alteration zone characterized by quartz veins with diaspore–pyrophyllite selvages. The prospect area was subjected to Tertiary to Holocene supergene alteration.