Evaluation of the temporal variations of groundwater storage and its interactions with climatic variables using GRACE data and hydrological models: A study from Turkey

Monitoring of the fluctuations of groundwater storage is particularly important in arid and semi-arid regions where water scarcity brings about various challenges. Remote sensing data and techniques play a preponderant role in developing solutions to environmental problems. The launch of Gravity Recovery and Climate Experiment (GRACE) satellites has eased the remote monitoring and evaluation of groundwater resources with an unprecedented precision over large scales. Within the scope of the current study, the latest release (RL06) of GRACE mass concentrations (Mascons) from Jet Propulsion Laboratory (JPL) dataset as well as Global Land Data Assimilation System (GLDAS) models of Noah and Catchment Land Surface Model (CLSM) were used to provide Groundwater Storage Anomalies (GWSA) over Turkey. The temporal interactions of the estimated GWSA with the climatic variables of precipitation and temperature (derived from the reanalysis datasets of CHELSA [Climatologies at High resolution for the Earth's Land Surface Areas] and FLDAS [the Famine Early Warning Systems Network Land Data Assimilation System], respectively) were investigated statistically. The results suggest that there is a descending trend (from 2003 to 2016) for Terrestrial Water Storage Anomalies (TWSA) and GWSA over Turkey with a total loss of 11 and 6 cm of water, respectively. The statistical analysis results also indicate that the monthly variations of GWSA over Turkey are highly correlated with precipitation and temperature at 2-month lag. The analysis of the climatology (long-term) values of monthly GWSA, precipitation and temperature also revealed high agreement between the variables.     

Optimal Compensation and Implementation for Adaptive Optics Systems

This paper develops a compensation algorithm based on Linear–Quadratic–Gaussian (LQG) control system design whose parameters are determined (in part) by a model of the atmosphere. The model for the atmosphere is based on the open-loop statistics of the atmosphere as observed by the wavefront sensor, and is identified from these using an auto-regressive, moving average (ARMA) model. The (LQG) control design is compared with an existing compensation algorithm for a simulation developed at ESO that represents the operation of MACAO adaptive optics system on the 8.2 m telescopes at Paranal, Chile. This revised version was published online in July 2006 with corrections to the Cover Date.     

Rate of strike-slip motion on the Amanos Fault (Karasu Valley, southern Turkey) constrained by K–Ar dating and geochemical analysis of Quaternary basalts

The left-lateral Amanos Fault follows a 200-km-long and up to 2-km-high escarpment that bounds the eastern margin of the Amanos mountain range and the western margin of the Karasu Valley in southern Turkey, just east of the northeastern corner of the Mediterranean Sea. Regional kinematic models have reached diverse conclusions as to the role of this fault in accommodating relative motion between either the African and Arabian, Turkish and African, or Turkish and Arabian plates. Local studies have tried to estimate its slip rate by K–Ar dating Quaternary basalts that erupted within the Amanos Mountains, flowed across it into the Karasu Valley, and have since become offset. However, these studies have yielded a wide range of results, ranging from 0.3 to 15 mm a⁻¹, which do not allow the overall role and significance of this fault in accommodating crustal deformation to be determined. We have used the Cassignol K–Ar method to date nine Quaternary basalt samples from the vicinity of the southern part of the Amanos Fault. These basalts exhibit a diverse chemistry, which we interpret as a consequence varying degrees of partial melting of their source combined with variable crustal contamination. This dating allows us to constrain the Quaternary slip rate on the Amanos fault to 1.0 to 1.6 mm a⁻¹. The dramatic discrepancies between past estimates of this slip rate are partly due to technical difficulties in K–Ar dating of young basalts by isotope dilution. In addition, previous studies at the key locality of Hacılar have unwittingly dated different, chemically distinct, flow units of different ages that are juxtaposed. This low slip rate indicates that, at present, the Amanos Fault takes up a small proportion of the relative motion between the African and Arabian plates, which is transferred southward to the Dead Sea Fault Zone. It also provides strong evidence against the long-standing view that its slip continues offshore to the southwest along a hypothetical left-lateral fault zone located south of Cyprus.     

Constraints on unconsolidated pyroclastic flow sediments related REE enrichments originated from potassic-alkaline Gölcük stratovolcano: Darıdere-Direkli-Yakaören (DDY) table 4deposits,southwestern Anatolia of Turkey

Acta Geochimica - In the last five decades, Rare Earth Elements (REE) are mostly produced from carbonatite complexes and alkaline magmatic environments. In this respect, pyroclastic flows produced...     

Paleogene evolution and demise of the proto‐Paratethys Sea in Central Asia (Tarim and Tajik basins): Role of intensified tectonic activity at ca. 41 Ma

The proto‐Paratethys Sea covered a vast area extending from the Mediterranean Tethys to the Tarim Basin in western China during Cretaceous and early Paleogene. Climate modelling and proxy studies suggest that Asian aridification has been governed by westerly moisture modulated by fluctuations of the proto‐Paratethys Sea. Transgressive and regressive episodes of the proto‐Paratethys Sea have been previously recognized but their timing, extent and depositional environments remain poorly constrained. This hampers understanding of their driving mechanisms (tectonic and/or eustatic) and their contribution to Asian aridification. Here, we present a new chronostratigraphic framework based on biostratigraphy and magnetostratigraphy as well as a detailed palaeoenvironmental analysis for the Paleogene proto‐Paratethys Sea incursions in the Tajik and Tarim basins. This enables us to identify the major drivers of marine fluctuations and their potential consequences on Asian aridification. A major regional restriction event, marked by the exceptionally thick (≤ 400 m) shelf evaporites is assigned a Danian‐Selandian age (ca. 63–59 Ma) in the Aertashi Formation. This is followed by the largest recorded proto‐Paratethys Sea incursion with a transgression estimated as early Thanetian (ca. 59–57 Ma) and a regression within the Ypresian (ca. 53–52 Ma), both within the Qimugen Formation. The transgression of the next incursion in the Kalatar and Wulagen formations is now constrained as early Lutetian (ca. 47–46 Ma), whereas its regression in the Bashibulake Formation is constrained as late Lutetian (ca. 41 Ma) and is associated with a drastic increase in both tectonic subsidence and basin infilling. The age of the final and least pronounced sea incursion restricted to the westernmost margin of the Tarim Basin is assigned as Bartonian–Priabonian (ca. 39.7–36.7 Ma). We interpret the long‐term westward retreat of the proto‐Paratethys Sea starting at ca. 41 Ma to be associated with far‐field tectonic effects of the Indo‐Asia collision and Pamir/Tibetan plateau uplift. Short‐term eustatic sea level transgressions are superimposed on this long‐term regression and seem coeval with the transgression events in the other northern Peri‐Tethyan sedimentary provinces for the 1st and 2nd sea incursions. However, the 3rd sea incursion is interpreted as related to tectonism. The transgressive and regressive intervals of the proto‐Paratethys Sea correlate well with the reported humid and arid phases, respectively in the Qaidam and Xining basins, thus demonstrating the role of the proto‐Paratethys Sea as an important moisture source for the Asian interior and its regression as a contributor to Asian aridification.     

Solution of the propagation of the waves in open channels by the transfer matrix method

Many problems in mechanics can be solved by the use of the transfer matrix method. The use of this method in hydraulics engineering is not widespread and only limited studies are available. In this study, linearized St. Venant equations were used and the use of transfer matrix in ocean engineering was investigated for long waves in open channels, and numerical application was carried out. The results obtained through the transfer matrix method, which is quite easy to use, program and comprehend, showed similar results obtained from the characteristics method and finite differences method.     

Supra-Pan-African unconformity between core and cover series of the Menderes Massif/Turkey and its geological implications

Well-preserved primary contact relationships between a Late Proterozoic metasedimentary and the metagranitic core and Palaeozoic cover series of the Menderes Massif have been recognized in the eastern part of the Çine submassif on a regional-scale. Metaconglomerates occur as laterally discontinuous channel-fill bodies close the base of the metaquartzarenite directly above the basement. The pebbles in the metaconglomerates consist mainly of different types of tourmaline-rich leucocratic granitoids, tourmalinite and schist in a sandy matrix. Petrographic features, geochemical compositions and zircon radiometric ages (549.6 ± 3.7–552.3 ± 3.1 Ma) of the diagnostic clasts of the metaconglomerates (e.g. leucocratic granitoids and tourmalinites) show excellent agreement with their in situ equivalents (549.0 ± 5.4 Ma) occurring in the Pan-African basement as stocks and veins.The correlation between clasts in the metaconglomerates and granitoids of the basement suggests that the primary contact between the basement and cover series is a regional unconformity (supra-Pan-African Unconformity) representing deep erosion of the Pan-African basement followed by the deposition of the cover series. Hence the usage of ‘core–cover’ terminology in the Menderes Massif is valid. Consequently, these new data preclude the views that the granitic precursors of the leucocratic orthogneisses are Tertiary intrusions.     

Investigation of the elastic characteristics of a three-storey steel structure using system identification

In this report, three different models in increasing order of complexity have been used to identify the seismic behaviour of a three-storey steel structure subjected to arbitrary forcing functions, all of which excite responses within the elastic range. All of the models are constructed using system identification. In the first model, five parameters have been used to identify the frame. Treating the system as a shear building, we assign one stiffness coefficient to each floor and introduce Rayleigh-type damping with two additional parameters. The mass, assumed to be concentrated at a floor level, is kept constant throughout the study. The parameters are established using a modified Gauss-Newton algorithm. The match between measured and predicted quantities is satisfactory when these quantities are restricted to floor accelerations or displacements. To remove the constraint imposed by assuming that the frame deforms as a shear building, a second model with eight parameters is introduced, allowing rotations of the joints as independent degrees of freedom. Six of the eight parameters are related to the stiffness characteristics of the structural members while the remaining two are related to damping as before. In constructing the eight-parameter model, we learned that it is the effective lengths of the members that change during optimization. We also found that the independent response quantities, floor accelerations and joint rotations, must be used in the cost function for the optimization algorithm to converge. The match between measured and predicted quantities for the eight-parameter model is excellent. The set of parameters derived from the minimum squared error gives a model that shows very good correlation using information on the full duration of the pulse or only a portion of it. Also the same correlation exists between the coefficients obtained from different excitations. In an effort to explain the values of the parameters associated with the girders, an additional degree of freedom, namely, the pitching motion of the shaking table, is introduced as an additional degree of freedom. The paper presents, therefore, a five-, an eight- and, finally, a nine-parameter model.