排序方式: 共有17条查询结果,搜索用时 234 毫秒
1.
Mihoko Hoshino Mitsuyoshi Kimata Norimasa Nishida Masahiro Shimizu 《Physics and Chemistry of Minerals》2008,35(2):59-70
Dissakisites from Trimouns dolomite mine, France, have two kinds of single crystals: chemical-zoned and homogeneous types.
Back-scattered electron microprobe (BSE) images of these dissakisites reveal both Ca–Al rich dark zones and Fe-ΣREE rich bright
zones. Crystal structures of three dark and two bright zones in a chemical-zoned dissakisite and of a homogeneous zone in
unzoned dissakisite were refined to individual R indices (about 3.0–5.0%) based on 1,400 observed [|F
0| > 4σF
0] reflections measured with MoKα X-radiation using the single crystal diffractometer. The differences in brightness between
their BSE images arise from those in coupled substitutions of the elements occupying A2 and M3 sites. The main reason for
these differences is that ten-coordinated A2 polyhedra and M3 octahedra are directly linked through their shared edge, which
creates a great potential for making this coupled substitution. This zoning indicates that formation of the whole zoned crystal,
where each zone could be grown steadily with its crystallographic axes mutually parallel to each other, may be identified
as autoepitaxy. 相似文献
2.
3.
M. Matsumoto S. Wallis M. Aoya M. Enami J. Kawano Y. Seto N. Shimobayashi 《Journal of Metamorphic Geology》2003,21(4):363-376
A largely undocumented region of eclogite associated with a thick blueschist unit occurs in the Kotsu area of the Sanbagawa belt. The composition of coexisting garnet and omphacite suggests that the Kotsu eclogite formed at peak temperatures of around 600 °C synchronous with a penetrative deformation (D1). There are local significant differences in oxygen fugacity of the eclogite reflected in mineral chemistries. The peak pressure is constrained to lie between 14 and 25 kbar by microstructural evidence for the stability of paragonite throughout the history recorded by the eclogite, and the composition of omphacite in associated eclogite facies pelitic schist. Application of garnet‐phengite‐omphacite geobarometry gives metamorphic pressures around 20 kbar. Retrograde metamorphism associated with penetrative deformation (D2) is in the greenschist facies. The composition of syn‐D2 amphibole in hematite‐bearing basic schist and the nature of the calcium carbonate phase suggest that the retrograde P–T path was not associated with a significant increase or decrease in the ratio of P–T conditions following the peak of metamorphism. This P–T path contrasts with the open clockwise path derived from eclogite of the Besshi area. The development of distinct P–T paths in different parts of the Sanbagawa belt shows the shape of the P–T path is not primarily controlled by tectonic setting, but by internal factors such as geometry of metamorphic units and exhumation rates. 相似文献
4.
High(C2/c)-low(P21/c) phase transition in clinoenstatite and pigeonite was successfully observed in situ at high temperatures for the first time under a transmission electron microscope. The phase transition was revealed to possess the characteristics of a first-order transition, due to the coexistence of both phases separated by the sharp interfaces and the nucleation-growth process. The diffusionless and time-independent reaction suggests that the transition occurs athermal-martensitically. Furthermore, the small or even negative thermal hysteresis and the interface motion suggest that the transition is not a typical type but a thermoelastic type of the martensitic transformation. This type of the transformation, studied extensively in metallurgy in relation to shape memory effect, is first recognized in rock-forming minerals. 相似文献
5.
Norimasa Nishiyama Robert Paul Rapp Tetsuo Irifune Takeshi Sanehira Daisuke Yamazaki Ken-ichi Funakoshi 《Physics and Chemistry of Minerals》2005,32(8-9):627-637
In situ X-ray diffraction measurements of KAlSi3O8-hollandite (K-hollandite) were performed at pressures of 15–27 GPa and temperatures of 300–1,800 K using a Kawai-type apparatus. Unit-cell volumes obtained at various pressure and temperature conditions in a series of measurements were fitted to the high-temperature Birch-Murnaghan equation of state and a complete set of thermoelastic parameters was obtained with an assumed K′300,0=4. The determined parameters are V 300,0=237.6(2) Å3, K 300,0=183(3) GPa, (?K T,0/?T) P =?0.033(2) GPa K?1, a 0=3.32(5)×10?5 K?1, and b 0=1.09(1)×10?8 K?2, where a 0 and b 0 are coefficients describing the zero-pressure thermal expansion: α T,0 = a 0 + b 0 T. We observed broadening and splitting of diffraction peaks of K-hollandite at pressures of 20–23 GPa and temperatures of 300–1,000 K. We attribute this to the phase transitions from hollandite to hollandite II that is an unquenchable high-pressure phase recently found. We determined the phase boundary to be P (GPa)=16.6 + 0.007 T (K). Using the equation of state parameters of K-hollandite determined in the present study, we calculated a density profile of a hypothetical continental crust (HCC), which consists only of K-hollandite, majorite garnet, and stishovite with 1:1:1 ratio in volume. Density of HCC is higher than the surrounding mantle by about 0.2 g cm?3 in the mantle transition zone while this relation is reversed below 660-km depth and HCC becomes less dense than the surrounding mantle by about 0.15 g cm?3 in the uppermost lower mantle. Thus the 660-km seismic discontinuity can be a barrier to prevent the transportation of subducted continental crust materials to the lower mantle and the subducted continental crust may reside at the bottom of the mantle transition zone. 相似文献
6.
Steeve Gréaux Yoshio Kono Norimasa Nishiyama Takehiro Kunimoto Kouhei Wada Tetsuo Irifune 《Physics and Chemistry of Minerals》2011,38(2):85-94
The thermoelastic parameters of synthetic Ca3Al2Si3O12 grossular garnet were examined in situ at high-pressure and high-temperature by energy dispersive X-ray diffraction, using
a Kawai-type multi-anvil press apparatus coupled with synchrotron radiation. Measurements have been conducted at pressures
up to 20 GPa and temperatures up to 1,650 K: this P, T range covered the entire high-P, T stability field of grossular garnet. The analysis of room temperature data yielded V
0,300 = 1,664 ± 2 ?3 and K
0 = 166 ± 3 GPa for K¢0 K^{\prime}_{0} fixed to 4.0. Fitting of our P–V–T data by means of the high-temperature third order Birch–Murnaghan or the Mie–Grüneisen–Debye thermal equations of state,
gives the thermoelastic parameters: (∂K
0,T
/∂T)
P
= −0.019 ± 0.001 GPa K−1 and α
0,T
= 2.62 ± 0.23 × 10−5 K−1, or γ
0 = 1.21 for fixed values q
0 = 1.0 and θ
0 = 823 (Isaak et al. Phys Chem Min19:106–120, 1992). From the comparison of fits from two different approaches, we propose to constrain the bulk modulus of grossular garnet
and its pressure derivative to K
T0 = 166 GPa and K¢T0 K^{\prime}_{T0} = 4.03–4.35. Present results are compared with previously determined thermoelastic properties of grossular-rich garnets. 相似文献
7.
Steeve?GréauxEmail author Norimasa?Nishiyama Yoshio?Kono Tetsuo?Irifune Laurent?Gautron 《Physics and Chemistry of Minerals》2011,38(8):581-590
The thermoelastic parameters of the CAS phase (CaAl4Si2O11) were examined by in situ high-pressure (up to 23.7 GPa) and high-temperature (up to 2,100 K) synchrotron X-ray diffraction, using a Kawai-type multi-anvil press. P–V data at room temperature fitted to a third-order Birch–Murnaghan equation of state (BM EOS) yielded: V 0,300 = 324.2 ± 0.2 Å3 and K 0,300 = 164 ± 6 GPa for K′ 0,300 = 6.2 ± 0.8. With K′ 0,300 fixed to 4.0, we obtained: V 0,300 = 324.0 ± 0.1 Å3 and K 0,300 = 180 ± 1 GPa. Fitting our P–V–T data with a modified high-temperature BM EOS, we obtained: V 0,300 = 324.2 ± 0.1 Å3, K 0,300 = 171 ± 5 GPa, K′ 0,300 = 5.1 ± 0.6 (?K 0,T /?T) P = ?0.023 ± 0.006 GPa K?1, and α0,T = 3.09 ± 0.25 × 10?5 K?1. Using the equation of state parameters of the CAS phase determined in the present study, we calculated a density profile of a hypothetical continental crust that would contain ~10 vol% of CaAl4Si2O11. Because of the higher density compared with the coexisting minerals, the CAS phase is expected to be a plunging agent for continental crust subducted in the transition zone. On the other hand, because of the lower density compared with lower mantle minerals, the CAS phase is expected to remain buoyant in the lowermost part of the transition zone. 相似文献
8.
Prolonged impact of earthquake-induced landslides on sediment yield in a mountain watershed: The Tanzawa region, Japan 总被引:5,自引:0,他引:5
Takashi Koi Norifumi Hotta Ituro Ishigaki Norimasa Matuzaki Yoshimi Uchiyama Masakazu Suzuki 《Geomorphology》2008,101(4):692-702
To determine for how long a landslide affects sediment discharge, the sediment yields of 15 check-dam basins were compared with the time series of landslide distributions in a mountain basin in the Tanzawa region, central Japan. The distribution of sediment yield was quantitatively estimated from deposition in the sediment pools of check dams. The relationship between the landslide history and sediment discharge in the Nakagawa River basin was examined for an approximately 80-year period. Two major landslide events occurred during this period: the 1923 Kanto Earthquake and the 1972 disaster caused by heavy rainfall. The resulting trend in sediment discharge of the whole basin, estimated using reservoir sedimentation in the Miho Dam at its base, was nearly constant, with high sediment discharge (2897 m3 km− 2 yr− 1) in the intervening quarter-century, despite the recovery of vegetation on landslide areas in this period. Comparisons of the landslide distributions resulting from the two disasters, the sediment yields of check-dam basins, and the sediment discharge of the whole basin indicate that recent sediment discharge contains landslide debris that was originated by the Kanto Earthquake that occurred over 80 years ago. Thus, to understand high sediment discharge, it is essential to investigate not only the current basin condition and recent events, but also the landslide history of the basin for at least the previous 100 years. 相似文献
9.
N. Shimobayashi A. Miyake M. Kitamura E. Miura 《Physics and Chemistry of Minerals》2001,28(9):591-599
Phase transition between low-temperature clinoenstatite (LT-CEn) and high-temperature clinoenstatite (HT-CEn) was studied
by using molecular dynamics (MD) simulations, based on empirical potential parameters. Starting from LT-CEn, the MD calculations
were carried out at atmospheric pressure and at elevated pressures (1–6 GPa). At elevated temperatures the transformation
from the starting LT-CEn to HT-CEn occurred at any pressure. It was confirmed that the HT-CEn has the same space group C2/c as diopside but the M2 site is six-coordinated, unlike diopside. A significant difference in the MD-simulated cell volumes
between LT-CEn and HT-CEn was also observed, showing a first-order transition. In addition, there were some temperature ranges
where LT-CEN and HT-CEn would be coexistent and very small thermal hystereses between increasing and decreasing temperatures
during the transition. These behaviors are consistent with the characteristic of a thermoelastic-martensitic transformation.
The phase boundary between LT-CEn and HT-CEn was determined for the first time. Its positive dT/dP slope strongly shows that the high-pressure clinoenstatite is a significantly distinct phase from HT-CEn although the both
phases have the same space group, C2/c.
Received: 8 November 2000 / Accepted: 28 April 2001 相似文献
10.
Hisayoshi YURIMOTO Isao SAKAGUCHI Norimasa NISHIDA Shigeho SUENO 《Geostandards and Geoanalytical Research》1991,15(1):155-159
Trace level determination of nickel in silicate rock samples has been achieved using secondary ion mass spectrometry (SIMS) with kinetic energy filtering. Standard rock references, issued by the Geological Survey of Japan, were fused into glass and used as standards for the SIMS analysis. Due to interferences from the glass matrix, the secondary ion of mass 60 was only useful for Ni, although the secondary ion was interfered mainly by CaO+. The contributions of these molecular ions were deconvolved by a least squares regression. Good linear correlation between results after the deconvolution and the Ni concentration in the glass standards was obtained. The uncertainties of the SIMS analysis depend strongly on the degree of contribution of CaO+ molecular ion. Such a method of SIMS analysis is especially useful to study the detailed behavior of Ni on a micro-scale in Ca-poor materials. 相似文献