Prediction of the seismic rotational displacements of retaining wall under passive condition is an important aspect of design in earthquake prone region. In this paper, the pseudo-dynamic method is used to compute the rotational displacements of rigid retaining wall supporting cohesionless backfill under seismic loading for the passive earth pressure condition. The proposed method considers time, phase difference and effect of amplification in shear and primary waves propagating through both the backfill and the retaining wall. The influence of ground motion characteristics on rotational displacement of the wall is evaluated. Also the effects of variation of parameters like wall friction angle, soil friction angle, amplification factor, shear wave velocity, primary wave velocity, period of lateral shaking, horizontal and vertical seismic accelerations on the rotational displacements are studied. The rotational displacement of the wall increases substantially with increase in amplification of both shear and primary waves, time of input motion, period of lateral shaking and decreases with increase in soil friction angle, wall friction angle. The rotational displacements of the wall also increase when the effect of wall inertia is taken into account. Results are provided in graphical form. 相似文献
Knowledge of seismic active earth pressure behind rigid retaining wall is very important in the design of retaining wall in
earthquake prone region. Commonly used Mononobe-Okabe method considers pseudo-static approach, which gives the linear distribution
of seismic earth pressure in an approximate way. In this paper, the pseudo-dynamic method is used to compute the distribution
of seismic active earth pressure on a rigid retaining wall supporting cohesionless backfill in more realistic manner by considering
time and phase difference within the backfill. Planar rupture surface is considered in the analysis. Effects of a wide range
of parameters like wall friction angle, soil friction angle, shear wave velocity, primary wave velocity and horizontal and
vertical seismic accelerations on seismic active earth pressure have been studied. Results are provided in tabular and graphical
non-dimensional form with a comparison to pseudo-static method to highlight the realistic non-linearity of seismic active
earth pressures distribution. 相似文献
One of the major drawbacks of the conventional method of land reclamation, which involves mixing cement with the dredged soils at the disposal site, is the high cost associated with its manufacturing and transportation. In this study, a new solidified dredged fill (SDF) technique and a new additive are proposed and their practical applications are discussed. Unlike the conventional approach, the dredged marine soils were mixed with the solidifiers using a newly designed mixing technique prior to its transport to site, which would significantly reduce the cost of site machinery and effectively reclaim land with adequate engineering properties necessary for the construction of infrastructure. To evaluate the performance of the reclaimed land using the proposed technique, a series of laboratory and field tests (namely, static and dynamic cone penetration tests, and plate load tests) were conducted on grounds filled with and without solidified dredged marine soils, respectively. The results showed that the engineering behavior of the reclaimed land with dredged marine soils using SDF technique had significantly improved. The SDF technique combined with the newly designed mixing system improved the performance of ground and has thus proved to be both cost-effective and safe. 相似文献
The stress–dilatancy relation is of critical importance for constitutive modelling of geomaterial. A novel fractional-order stress–dilatancy equation had been developed for granular soil, where a nonlinear stress–dilatancy response was always predicted. However, it was experimentally observed that after a certain extent of shearing, an almost linear response between the stress ratio and the dilatancy ratio, rather than the nonlinear response, usually existed. To capture such stress–dilatancy behaviour, a new fractional stress–dilatancy model is developed in this study, where an apparent linear response of the stress–dilatancy behaviour of soil after sufficient shearing is obtained via analytical solution. As the fractional order varies, the derived stress–dilatancy curve and the associated phase transformation state stress ratio keep changing. But, unlike existing researches, no other specific parameters, except the parameter related to fractional order, concerning such shift are required. Then, the developed stress–dilatancy model is applied to constitutive modelling of granular soil and soil–structure interface, for further validation. A series of test results of different granular soils and soil–structure interfaces under different loading conditions are simulated and compared, where a good model performance is observed.