Mechanisms of riverbank failure along the Arno River,central Italy

Riverbanks along the Arno River have been investigated with the aims of de?ning the main mechanisms of failure and retreat, their spatial distribution, and their causes. Geomorphological aspects were investigated by a reconnaissance of riverbank processes, for a number (26) of representative sites. Laboratory and in situ tests were then performed on a selected number of riverbanks (15). Based on the material characteristics, six main typologies of riverbanks have been de?ned, with homogeneous ?ne‐grained and composite banks representing the most frequent types. Slab‐type failures are the most frequent mechanism observed on ?ne‐grained banks, while cantilever failures prevail on composite banks. The role of river stage and related pore water pressure distributions in triggering the main observed mechanisms of failure has been investigated using two different types of stability analysis. The ?rst was conducted for 15 riverbanks, using the limit equilibrium method and considering simpli?ed hypotheses for pore water pressure distribution (annulment of negative pore pressures in the portion of the bank between low water stage and peak stage). Stability conditions and predicted mechanisms of failure are shown to be in reasonably good agreement with ?eld observations. Three riverbanks, representative of the main alluvial reaches of the river, were then selected for a more detailed bank stability analysis, consisting of: (a) de?nition of characteristic hydrographs of the reach with different return periods; (b) modelling of saturated and unsaturated ?ow using ?nite element seepage analysis; and (c) stability analysis with the limit equilibrium method, by adopting pore water pressure values derived from the seepage analysis. The results are compared to those obtained from the previous simpli?ed analysis, and are used to investigate the different responses, in terms of stability, to different hydrological and riverbank conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Monitoring and modelling of pore water pressure changes and riverbank stability during flow events

Pore water pressures (positive and negative) were monitored for four years (1996–1999) using a series of tensiometer‐piezometers at increasing depths in a riverbank of the Sieve River, Tuscany (central Italy), with the overall objective of investigating pore pressure changes in response to ?ow events and their effects on bank stability. The saturated/unsaturated ?ow was modelled using a ?nite element seepage analysis, for the main ?ow events occurring during the four‐year monitoring period. Modelling results were validated by comparing measured with computed pore water pressure values for a series of representative events. Riverbank stability analysis was conducted by applying the limit equilibrium method (Morgenstern‐Price), using pore water pressure distributions obtained by the seepage analysis. The simulation of the 14 December 1996 event, during which a bank failure occurred, is reported in detail to illustrate the relations between the water table and river stage during the various phases of the hydrograph and their effects on bank stability. The simulation, according to monitored data, shows that the failure occurred three hours after the peak stage, during the inversion of ?ow (from the bank towards the river). A relatively limited development of positive pore pressures, reducing the effective stress and annulling the shear strength term due to the matric suction, and the sudden loss of the con?ning pressure of the river during the initial drawdown were responsible for triggering the mass failure. Results deriving from the seepage and stability analysis of nine selected ?ow events were then used to investigate the role of the ?ow event characteristics (in terms of peak stages and hydrograph characteristics) and of changes in bank geometry. Besides the peak river stage, which mainly controls the occurrence of conditions of instability, an important role is played by the hydrograph characteristics, in particular by the presence of one or more minor peaks in the river stage preceding the main one. Copyright © 2004 John Wiley & Sons, Ltd.     

6: Classification of VMS deposits: Lessons from the South Uralides

VMS deposits of the South Urals developed within the evolving Urals palaeo-ocean between Silurian and Late Devonian times. Arc-continent collision between Baltica and the Magnitogorsk Zone (arc) in the south-western Urals effectively terminated submarine volcanism in the Magnitogorsk Zone with which the bulk of the VMS deposits are associated. The majority of the Urals VMS deposits formed within volcanic-dominated sequences in deep seawater settings. Preservation of macro and micro vent fauna in the sulphide bodies is both testament to the seafloor setting for much of the sulphides but also the exceptional degree of preservation and lack of metamorphic overprint of the deposits and host rocks. The deposits in the Urals have previously been classified in terms of tectonic setting, host rock associations and metal ratios in line with recent tectono-stratigraphic classifications. In addition to these broad classes, it is clear that in a number of the Urals settings, an evolution of the host volcanic stratigraphy is accompanied by an associated change in the metal ratios of the VMS deposits, a situation previously discussed, for example, in the Noranda district of Canada.Two key structural settings are implicated in the South Urals. The first is seen in a preserved marginal allochthon west of the Main Urals Fault where early arc tholeiites host Cu–Zn mineralization in deposits including Yaman Kasy, which is host to the oldest macro vent fauna assembly known to science. The second tectonic setting for the South Urals VMS is the Magnitogorsk arc where study has highlighted the presence of a preserved early forearc assemblage, arc tholeiite to calc-alkaline sequences and rifted arc bimodal tholeiite sequences. The boninitc rocks of the forearc host Cu–(Zn) and Cu–Co VMS deposits, the latter hosted in fragments within the Main Urals Fault Zone (MUFZ) which marks the line of arc-continent collision in Late Devonian times. The arc tholeiites host Cu–Zn deposits with an evolution to more calc-alkaline felsic volcanic sequences matched with a change to Zn–Pb–Cu polymetallic deposits, often gold-rich. Large rifts in the arc sequence are filled by thick bimodal tholeiite sequences, themselves often showing an evolution to a more calc-alkaline nature. These thick bimodal sequences are host to the largest of the Cu–Zn VMS deposits.The exceptional degree of preservation in the Urals has permitted the identification of early seafloor clastic and hydrolytic modification (here termed halmyrolysis sensu lato) to the sulphide assemblages prior to diagenesis and this results in large-scale modification to the primary VMS body, resulting in distinctive morphological and mineralogical sub-types of sulphide body superimposed upon the tectonic association classification.It is proposed that a better classification of seafloor VMS systems is thus achievable using a three stage classification based on (a) tectonic (hence bulk volcanic chemistry) association, (b) local volcanic chemical evolution within a single edifice and (c) seafloor reworking and halmyrolysis.     

Fragmentation during Rock Falls: Two Italian Case Studies of Hard and Soft Rocks

In recent years, rock fall phenomena in Italy have received considerable attention for risk mitigation through in situ observations and experimental data. This paper reports the study conducted at Camaldoli Hill, in the urban area of Naples, and at Monte Pellegrino, Palermo, Italy. The rocks involved are volcanic Neapolitan yellow tuff (NYT) in the former area and dolomitic limestone in the latter. Both rocks, even though with different strength characteristics, have shown a significant tendency towards rock fragmentation during run out. This behavior was first investigated by comparing the volumes of removable blocks on the cliff faces (V ₀) and fallen blocks on the slopes (V _f). It was assumed that the ratio V _f/V ₀ decreases with the distance (x _f) from the detachment area by an empirical law, which depends on a coefficient α, correlated with the geotechnical properties of the materials involved in the rock fall. Finally, this law was validated by observation of well-documented natural rock falls (Palermo) and by in situ full-scale tests (Naples). From the engineering perspective, consideration of fragmentation processes in rock fall modeling provides a means for designing low-cost mitigation measures.     

Deep uncertainty in long-term hurricane risk: Scenario generation and implications for future climate experiments

Current projections of long-term trends in Atlantic hurricane activity due to climate change are deeply uncertain, both in magnitude and sign. This creates challenges for adaptation planning in exposed coastal communities. We present a framework to support the interpretation of current long-term tropical cyclone projections, which accommodates the nature of the uncertainty and aims to facilitate robust decision making using the information that is available today. The framework is populated with projections taken from the recent literature to develop a set of scenarios of long-term hurricane hazard. Hazard scenarios are then used to generate risk scenarios for Florida using a coupled climate–catastrophe modeling approach. The scenarios represent a broad range of plausible futures; from wind-related hurricane losses in Florida halving by the end of the century to more than a four-fold increase due to climate change alone. We suggest that it is not possible, based on current evidence, to meaningfully quantify the relative confidence of each scenario. The analyses also suggest that natural variability is likely to be the dominant driver of the level and volatility of wind-related risk over the coming decade; however, under the highest scenario, the superposition of this natural variability and anthropogenic climate change could mean notably increased levels of risk within the decade. Finally, we present a series of analyses to better understand the relative adequacy of the different models that underpin the scenarios and draw conclusions for the design of future climate science and modeling experiments to be most informative for adaptation.     

The amphipod Talitrus saltator as a bioindicator of human trampling on sandy beaches

The present paper assesses the use of the supralittoral amphipod Talitrus saltator as a bioindicator of the effects of human trampling on the supralittoral sandy band. Samplings in delimited areas were carried out at sites subjected to different human impact. The results showed a strong negative correlation between the number of swimmers and the sandhopper population density, while there was no clear relationship between sandhopper abundance and the other factors considered: granulometry, compactness and organic carbon content of the sand, and trace metal contents in the sand and sandhoppers. A field test of trampling conducted in a confined space showed its direct negative effect on sandhopper survival. However, trace metal analysis confirmed the ability of T. saltator to bioaccumulate some elements (Hg, Zn, Cu, Cd). Our study demonstrates that T. saltator is a good bioindicator of human impact in the supralittoral zone of sandy shores.     

Analysis of climatic trends in data from the agrometeorological station of Bologna-Cadriano, Italy (1952–2007)

Agriculture is highly exposed to climate change, as farming activities directly depend on climatic conditions. Knowledge of the extent of such change and of related phenomena will help to answer the questions posed by society about adaptation strategies. The global situation is well described by the Fourth IPCC assessment report (IPCC 2007), but local studies are important to understand the impact and the priorities to adopt in adaptation strategies. In this study a historical set of meteorological data, collected during the period 1952–2007 at the University of Bologna (Italy) agrometeorological station, was analysed. Several indexes, such as Frost Severity Index, number of hot days, number of rainy days, etc., were calculated, and their trends in time were analysed. The results show a scenario of increasing temperatures and evapotranspiration, a decrease in rainy days and a deepening of the watertable. The effect of these changes on agriculture will be a decrease in water availability, an increase in heat stress in plants and an increase in drought risk.     

Some economics of ‘dangerous’ climate change: Reflections on the Stern Review

The Stern Review on the Economics of Climate Change concluded that there can be “no doubt” the economic risks of business-as-usual (BAU) climate change are “very severe” [Stern, 2006. The Economics of Climate Change. HM Treasury, London, p. 188]. The total cost of climate change was estimated to be equivalent to a one-off, permanent 5–20% loss in global mean per-capita consumption today. And the marginal damage cost of a tonne of carbon emitted today was estimated to be around $312 [p. 344]. Both of these estimates are higher than most reported in the previous literature. Subsequently, a number of critiques have appeared, arguing that discounting is the principal explanation for this discrepancy. Discounting is important, but in this paper we emphasise that how one approaches the economics of risk and uncertainty, and how one attempts to model the very closely related issue of low-probability/high-damage scenarios (which we connect to the recent discussion of ‘dangerous’ climate change), can matter just as much. We demonstrate these arguments empirically, using the same models applied in the Stern Review. Together, the issues of risk and uncertainty on the one hand, and ‘dangerous’ climate change on the other, raise very strongly questions about the limits of a welfare-economic approach, where the loss of natural capital might be irreversible and impossible to compensate. Thus we also critically reflect on the state-of-the-art in integrated assessment modelling. There will always be an imperative to carry out integrated assessment modelling, bringing together scientific ‘fact’ and value judgement systematically. But we agree with those cautioning against a literal interpretation of current estimates. Ironically, the Stern Review is one of those voices. A fixation with cost-benefit analysis misses the point that arguments for stabilisation should, and are, built on broader foundations.