Coronal mass ejection associated with the stationary post-flare arch of 21–22 May 1980

By using a combination of X-ray (HXIS), H (Haleakala), white-light corona (Solwind), and zodiacal light (Helios) images on 21–22 May, 1980 we demonstrate, and try to explain, the co-existence of a coronal mass ejection with a stationary post-flare coronal arch. The mass ejection was seen, both by Solwind and Helios, in prolongation of the path of a powerful spray, whereas the active region filament did not erupt. A tentative comparison is made with other occurrences of stationary, or quasi-stationary post-flare coronal arches.     

激光拉曼光谱法分析多种显微组分荧光变化及其应用

利用激发488 nm激光的氩离子激光器作为RENISHAW inVia型激光拉曼光谱仪的光源,建立了多种显微组分荧光变化(FAMM)分析方法,并对镜质体反射率明显抑制的东营凹陷有效烃源岩进行了测定。结果表明,东营凹陷有效烃源岩的有机质类型越好,镜质体反射率抑制程度越高,有效烃源岩的真实成熟度应主要处于0.64%~1.30%,而不是实测镜质体反射率所反映的0.37%~1.10%。     

Kinetics of Cd sorption, desorption and fixation by calcite: A long-term radiotracer study

Time-dependent sorption and desorption of Cd on calcite was studied over 210 days utilizing ¹⁰⁹Cd as a tracer to distinguish between ‘labile’ and ‘non-labile’ forms of sorbed Cd. Stabilizing the calcite suspensions for 12 months under atmospheric P_CO2 and controlled temperature was necessary to reliably follow Cd dynamics following initial sorption. Results revealed time-dependant Cd sorption and marked desorption hysteresis by calcite under environmentally relevant conditions. Data obtained were fitted to a first-order kinetic model and a concentric shell diffusion model. Both models described the progressive transfer of Cd²⁺ to a less reactive form within calcite and subsequent desorption of Cd subject to different initial contact times. The kinetic model provided a better fit to the combined sorption and desorption data (R² = 0.992). It differentiates between two ‘pools’ of sorbed Cd²⁺ on calcite, ‘labile’ and ‘non-labile’, in which labile sorbed Cd is in immediate equilibrium with the free Cd²⁺ ion activity in solution whereas non-labile Cd is kinetically restricted. For the diffusion model (R² = 0.959), the rate constants describing Cd dynamics in calcite produced a half-life for Cd desorption of ∼175 d, for release to a ‘zero-sink’ solution. Results from this study allow comment on the likely mechanisms occurring at the calcite surface following long-term Cd sorption.     

Advances in the fatigue assessment of wire ropes

This paper presents the findings from an in-depth analysis of the (axial) stiffness data recorded during tension–tension fatigue tests on wire ropes, particularly in relation to how changes in stiffness during testing relate to changes in rope strength. A linear relationship between stiffness and strength is shown to exist and a methodology presented for quantifying residual strength with applied cycles. New lower bound fatigue lines for six-strand rope and spiral strand are presented which are based on a 10% loss of strength. These new lines have the advantage of having been established using a common discard criterion for wire ropes.     

A giant three-stage submarine slide off Norway

One of the largest submarine slides known, The Storegga Slide, is located on the Norwegian continental margin. The slide is up to 450 m thick and has a total volume of about 5,600 km3. The headwall of the slide scar is 290 km long and the total run-out distance is about 800 km. The slide involved sediments of Quaternary to Early Tertiary age and occurred in three stages. Earthquakes combined with decomposition of gas hydrates are believed to be the main triggering agents for the slides. The first slide event is tentatively dated to be about 30,000 to 50,000 years B.P. and the two last major events are dated to be at 6,000 to 8,000 years B.P.     

Probing molecular-level transformations of dissolved organic matter: insights on photochemical degradation and protozoan modification of DOM from electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Molecular-level characterization of natural organic matter (NOM) has been elusive due to the inherent complexity of natural organic mixtures and to the fact that individual components are often polar and macromolecular. Electrospray ionization (ESI) is a “soft” ionization technique that ionizes polar compounds from aqueous solution prior to injection into a mass spectrometer. The highest resolution and mass accuracy of compounds within NOM have been achieved when ESI is combined with an ultrahigh-resolution mass spectrometer such as the Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR MS). With this technique, individual molecules within a variety of natural organic mixtures can be detected and their elemental composition can be determined. At low mass-to-charge (m/z) ratio, the resolution is high enough to assign exact molecular formulas allowing specific components of these mixtures to be identified. In addition to molecular identification, we can now use ESI FT-ICR MS to examine molecular-level changes in different organic mixtures as a function of relevant geo-processes, such as microbial alterations and photochemistry. Here we present the results from the application of ESI FT-ICR MS to two geochemical questions: (1) the effect of photoirradiation on the molecular composition of fulvic acids and (2) the role of protozoan grazers in the modification of DOM in aquatic systems.     

Risk-based decision-making for drilling waste discharges using a fuzzy synthetic evaluation technique

Offshore petroleum drilling wastes contain toxic substances that are potentially harmful to the marine ecosystem. Despite environmentally benign characteristics, wastes associated with synthetic-based fluids still contain a certain amount of pollutants due to contamination with formation oil and the presence of trace heavy metals in barite, which may pose risk when discharged into the marine environment. A framework is presented here for a decision support system for the selection of the best drilling waste discharge option. Uncertainties in the quantification of risk, cost and technical feasibility are expressed by fuzzy numbers. An analytical hierarchy process with a technique called fuzzy synthetic evaluation is employed to determine the best management alternative (discharge scenario).     

Assessment of cytochrome P450 1A in harbour seals (Phoca vitulina) using a minimally-invasive biopsy approach

Biomarkers of organochlorine exposure, such as the induction of cytochrome P450 1A (CYP1A), can be used to assess the impact of environmental contaminants on the health of free-ranging marine mammal populations. The objective of the present study was to measure CYP1A in skin and liver biopsies obtained from live harbour seals (Phoca vitulina). Twelve harbour seal pups, aged three to five weeks, were captured from the Fraser River estuary, British Columbia, Canada, and temporarily held in captivity. Skin ( approximately 60 mg) and liver ( approximately 40 mg) biopsies, obtained while seals were under general anaesthesia, yielded sufficient tissue for the measurement of CYP1A by immunoblot analysis and ethoxyresorufin O-deethylase activity. A short-term exposure experiment, in which harbour seals (n=3) were treated orally with beta-naphthoflavone (BNF), resulted in increased hepatic and cutaneous CYP1A protein levels, consistent with observations in other mammals. This study is the first to measure CYP1A in skin and liver biopsies from live harbour seals and to report in vivo BNF-associated CYP1A induction in a marine mammal. The results demonstrate that microsamples collected using minimally-invasive techniques can provide toxicologically-relevant information form marine mammals.     

Precious metals in massive base metal sulfide deposits

Gold and silver are ubiquitous, sometimes minor but economically important metals in massive base metal sulfide ores. Their content, proportions and distribution in the ores depend on complex, interrelated factors of their source, mobilization, transport and deposition.Different types of these deposits are formed by similar seafloor hydrothermal systems operating, however, in widely differing tectono-stratigraphic environments which span a spectrum from ensimatic-oceanic, through continent-margin to ensialic-continental ones. Like those of the base metals, the proportions and distribution of the precious metals in the ores vary regionally with these changing depositional environments. This suggests that precious metal content of the sub-seafloor rocks in which the generative fluids circulate is one factor that governs the amounts and distribution in the ores. The lithology of these source-rocks is also important. Pillowed, tholeiitic basalts have high permeability, golddepleted crystalline pillow interiors and relatively gold-rich palagonitic rims, and are consequently particularly favorable sources.Mobilization of gold from the sub-seafloor rocks may require basalt-water, and/or carbonaceous sediment-water reactions to produce strongly reduced bisulfide, carbonyl or cyanide complexes that promote gold transport. Chloride complexing and transport are less important for gold but more so for silver and the base metals.Seafloor hydrothermal discharge at shallow depth is commonly accompanied by boiling, steamblast explosions in the vent and resulting deep penetration and mixing of cool, oxygenated seawater with rising hot, reduced metalliferous fluid. This results in deposition of both chloride- and isulfide-complexed gold at depth and centrally in the footwall stockwork or in copper ore in the base of the massive body. Chloride-complexed silver, stable to lower temperatures, is carried farther and deposited with higher-level and more distal, massive zinc-lead ores. Boiling in deep water, however, although possible, is rare. This fact minimizes deep fluid mixing and allows transport of lower temperaturestable, bisulfide-complexed gold to the seafloor and outward from the vent. Gold too, is then deposited with the shallower, distal, massive zinc-lead-silver ore. Late-stage changes in fluid Eh, salinity and activity of sulfur during evolution of the generative hydrothermal system, and by discharge through previously deposited, early stage sulfides around the vent also cause diagenetic remobilization of gold, moving it to shallower, more distal locations in the system. In combination, these relationships explain the three associations of gold in primary, in-situ massive sulfide deposits; in central, deep footwall stockwork mineralization with or without copper, in central copper ore in the base of the massive body and in shallow, peripheral pyritic zinclead-silver ore.Primary, in-situ ore near the vent is sometimes reworked by seafloor density flows which transport clasts of the primary sulfides down-slope, mix them with rock and sedimentary detritus and redeposit them to form secondary, transported ore. Gold, like iron and the base metals, is diluted during this clastic transport. But silver and barite may be enriched indicating transport in the density flows not only as clasts of primary ore but partly also m solution in the hydrothermal fluids that, in this case, must have lubricated the density flows.

---

Zusammenfassung Gold- und Silbervorkommen in massiven Metallsulfid-Lagerstätten sind stets ökonomisch wichtige Metalle, auch wenn sie nur in geringen Konzentrationen vorliegen. Der Gehalt an diesen Metallen und ihre Verteilung innerhalb der Lagerstätte hängt von komplexen, sich gegenseitig beeinflussenden Faktoren wie Metallquelle, Art der Mobilisation, Transport und Fällung ab.Unterschiedliche Lagerstättentypen werden von ähnlichen hydrothermalen Systemen auf den Ozeanböden gebildet. Die tektonostratigraphischen Environments unterscheiden sich dabei allerdings beträchtlich; sie befinden sich in ensimatisch-ozeanischen, kontinentalrandlichen und ensialischkontinentalen Bereichen. Innerhalb dieser regional wechselnden Ablagerungsbedingungen variiert Konzentration und Verteilung der Edelmetalle in den Lagerstätten wie bei den einfachen Metallen. Dies bedeutet, daß der Gehalt an Edelmetallen der Gesteine, die den Meeresboden unterlagern und durch die die metallhaltigen Lösungen zirkulieren, ein Faktor ist, der Menge und Verteilung der Metalle in der Lagerstätte steuert. Ebenso ist die Lithologie dieser Gesteine von Bedeutung. Als besonders gut geeignete Quellen gelten kissenartige tholeitische Basalte mit hoher Permeabilität, goldarmen Kisseninneren und relativ goldreichem palagonitischem Rand.Um das Gold aus diesen Gesteinen mobilisieren zu können, bedarf es einer Reaktion zwischen Basalt und Wasser und/oder eines karbonatischen Sediments mit Wasser, um stark reduziertes Bisulfid, Carbonyl-oder Cyanidkomplexe zu bilden, die den Goldtransport ermöglichen. Chlorid-Komplexbildung und -Transport sind zwar wichtig für Silber und einfache Metalle, für Gold spielen sie nur eine untergeordnete Rolle.Der Austritt hydrothermaler Lösungen an Ozeanböden in geringer Tiefe wird in der Regel von Sieden und explosionsartigem Dampfaustritt begleitet und führt deshalb zu einem tiefen Eindringen und Durchmischen von kaltem, sauerstoffreichen Meereswasser mit den aufsteigenden heißen, reduzierten metallischen Lösungen. Daher kommt es zur Fällung von sowohl an Chloridkomplexe als auch an Bisulfidkomplexe gebundenem Gold. Diese Ausfällung findet in größerer Tiefe statt und zwar hauptsächlich im liegenden Stockwerk oder mit Kupfer zusammen an der Basis der massiven Lagerstätte. An Chloridkomplexe gebundenes Silber ist auch bei niedrigeren Temperaturen stabil, wird also weiter transportiert und in einem höheren Niveau in distal gelegenen Blei-Zink-Lagerstätten gefällt. In größeren Wassertiefen kommt es seltener zu dem beobachteten Sieden der austretenden Lösungen. Diese Tatsache reduziert das Durchmischen der Lösungen in größeren Tiefen und ermöglicht den Transport von Gold, das an Bisulfidkomplexe gebunden ist. In diesem Fall ist die Verbindung auch bei niedrigeren Temperaturen noch stabil also transportfähig und kann bis zum Meeresboden oder außerhalb des Schlotes in Lösung bleiben. Dabei kann das Gold zusammen mit Blei, Zink und Silber in mehr distalen Lagerstätten angereichert werden. Späte Änderungen in Eh, Salinität und Schwefelaktivität der Lösungen während der Entwicklung des hydrothermalen Systems, sowie der Austritt durch früher abgelagerte den Schlot umgebende Sulfide, können eine diagenetische Gold-Remobilisation auslösen. Auch dabei kann das Metall zu in geringer Tiefe liegenden, distalen Ablagerungsorten transportiert werden. Berücksichtigt man alle Faktoren, so erklären diese Verhältnisse die drei möglichen Goldvorkommen in primären, in-situ vorliegenden Sulfid-Lagerstätten: Mit Kupfer vergesellschaftet, allerdings nicht unbedingt, zentral im liegenden Stockwerk; an der Basis der Kupferlagerstätte und in geringer Tiefe in Verbindung mit peripheren Blei-Zink-Silber-Vorkommen.Primäre, in-situ neben Schloten vorkommende Lagerstätten werden in einigen Fällen von meeresbodennahen Masseströmen aufgearbeitet. Diese transportieren Sulfidkomponenten, die während des Transports mit Sediment und Gesteinsbruchstücken vermischt und schließlich als sekundäre sedimentäre Lagerstätte abgelagert werden. Durch diesen Transport und die Mischung der Klastika wird die Goldkonzentration in der späteren Lagerstätte stark reduziert. Silber und Barit können dagegen in Ausnahmefällen während des Transports angereichert werden, da diese Komponenten nicht nur als Sulfidbruchstücke transportiert werden, sondern auch in Lösung in den hydrothermalen Lösungen vorhanden sein können. Diese Lösungen dienen in solchen Fällen den Masseströmen als Gleithorizont.

---

Résumé Dans les gisements de sulfures métalliques massifs, l'or et l'argent sont des métaux ubiquistes, parfois mineurs, mais toujours d'importance économique. Leur teneur et leur distribution dans les corps minéralisés dépendent de facteurs complexes, en relation les uns avec les autres, tels que: leur source, leur mobilité, leurs modalités de transport et de dépôt.A partir des mêmes systèmes hydrothermaux en action sur le fond de la mer, divers types de gisements peuvent être engendrés, selon leur environnement tectono-stratigraphique: océanique ensimatique, de marge continentale ou continental ensialique. Les teneurs et la répartition des métaux précieux, comme celle des autres métaux varient régionalement selon ces divers milieux. Ceci suggère que le contenu en métaux précieux dans les roches sous-jacentes au fond marin à travers lesquelles circulent les solutions minéralisantes est un facteur qui détermine leurs teneurs et leurs répartitions dans les minerais. La lithologie de ces roches-sources est également importante. Une source particulièrement significative est représentée par les coussins des basaltes tholéiitiques, très perméables, avec leur coeur pauvre en or et leur couronne palagonitique relativement riche.Le lessivage de l'or dans les roches situées sous le fond marin peut impliquer des réactions eau-basalte et/ou eausédiments carbonatés, réactions susceptibles d'engendrer les bisulfures très réduits et les complexes carbonés ou cyanurés qui permettent le transport de l'or. Le transport par complexes chlorurés joue un rôle subordoné dans le cas de l'or, mais important dans le cas de l'argent et des autres métaux.L'arrivée de solutions hydrothermales sur les fonds marins peu profonds est d'ordinaire accompagnée d'ébullitons et d'émissions explosives de vapeur, ce qui provoque la pénétration profonde d'eau de mer froide et oxygénée et son mélange avec les fluides métallifères chauds et réducteurs ascendants. Il en résulte le dépôt de complexes aurifères bisulfurés et chlorurés. Cette précipitation s'opère en profondeur, particulièrement dans les roches sous-jacentes ou dans le minerai de cuivre, à la base des corps minéralisés massifs. L'argent des complexes chlorurés, stables à plus basse température, est transporté plus loin et se dépose, en situation plus distale, dans les minerals massifs de Pb-Zn. Dans les mers profondes, l'ébullition, sans être impossible, est néanmoins un phénomène rare; cette circonstance minimise le mélange des fluides en profondeur et permet le transport de l'or jusqu'à la surface du fond et même loin des évents sous la forme de complexes bisulfurés stables à basse température. L'or est alors déposé en situation distale peu profonde avec les minerals massifs de Zn-Pb-Ag. Des modifications tardives d'Eh, de salinité et d'activité du soufre dans les solutions au cours de l'évolution du système hydrothermal, de même que le lessivage des sulfures déjà accumulés autour des évents entraînent une remobilisation diagénétique de l'or vers des situations distales d'eau peu profonde. La combinaison de ces divers facteurs permet d'expliquer les trois occurrences de l'or dans les dépôts in situ de sulfures massifs primaires: dans les parties centrales des masses sous-jacentes en association ou non avec le Cu, à la base des corps minéralisés en Cu, et à faible profondeur, en liaison avec les gisements périphériques de Pb-Zn-Ag.Les gisements primaires, formés in situ près des évents sont parfois remaniés par des courants de densité, qui emportent des clastes de sulfures, les mélangent aux débris sédimentaires et les redéposent sous forme de minerais secondaires. De tels transports provoquent la dilution de l'or, en même temps que celle du fer et des autres métaux. Par contre, l'argent et la barite peuvent subir un enrichissement car leur transport dans les courants de densité ne s'effectue pas seulement sous forme de clastes, mais également en solution dans des fludies hydrothermaux, lesquels, dans ce cas, contribuent à lubrifier le courant de densité.

---

, . , , - , , . . - ; -, - . . .., , , , , . . , ; , . , / ; , , , . ; . , , , , , . , . , . . , , . , , , ; , - . . , . , .. . , . , , . , . , 3- in-situ: , , , ; ; , . , in-situ , . , . . , , , , . , .