Thermophysical properties of Almahata Sitta meteorites (asteroid 2008 TC3) for high‐fidelity entry modeling

Asteroid 2008 TC₃ was characterized in a unique manner prior to impacting Earth's atmosphere, making its October 7, 2008, impact a suitable field test for or validating the application of high‐fidelity re‐entry modeling to asteroid entry. The accurate modeling of the behavior of 2008 TC₃ during its entry in Earth's atmosphere requires detailed information about the thermophysical properties of the asteroid's meteoritic materials at temperatures ranging from room temperature up to the point of ablation (T ~ 1400 K). Here, we present measurements of the thermophysical properties up to these temperatures (in a 1 atm. pressure of argon) for two samples of the Almahata Sitta meteorites from asteroid 2008 TC₃: a thick flat‐faced ureilite suitably shaped for emissivity measurements and a thin flat‐faced EL6 enstatite chondrite suitable for diffusivity measurements. Heat capacity was determined from the elemental composition and density from a 3‐D laser scan of the sample. We find that the thermal conductivity of the enstatite chondrite material decreases more gradually as a function of temperature than expected, while the emissivity of the ureilitic material decreases at a rate of 9.5 × 10^?5 K^?1 above 770 K. The entry scenario is the result of the actual flight path being the boundary to the load the meteorite will be affected with when entering. An accurate heat load prediction depends on the thermophysical properties. Finally, based on these data, the breakup can be calculated accurately leading to a risk assessment for ground damage.     

Thermal and shock history of Almahata Sitta meteorite inferred from structure refinement of pyroxene and Mössbauer spectroscopy of Fe-Ni metal

The crystal structures of orthopyroxene (En_86.3Fs_8.6Wo_5.1, space group Pbca) and pigeonite (En_81.7Fs_8.8Wo_9.5, space group P2₁/c) from the Almahata Sitta ureilite (fragment#051) have been refined to R1 indices of 3.10% and 2.53%, respectively, using single-crystal X-ray diffraction data. The unit formulas were calculated from electron microprobe analysis, and the occupancies at the M1 and M2 sites were refined for both pyroxenes from the single-crystal diffraction data. The results indicate a rather disordered intracrystalline Fe²⁺-Mg cation distribution over the M1 and M2 sites, with a closure temperature of 726(±55)°C for orthopyroxene and 704(±110)°C for pigeonite, suggesting fast cooling of these pyroxenes. The Mössbauer spectrum of the Fe-Ni metal particles of Almahata Sitta ureilite (fragment#051) is dominated by two overlapping magnetic sextets that are assigned to Fe atoms in Si-bearing kamacite, and arise from two different nearest-neighbor configurations of Fe* (=Fe+Ni) and Si atoms in the bcc structure of kamacite; (8F*, 0Si) and (7Fe*, 1Si). In addition, the spectrum shows weak absorption peaks that are attributed to the presence of small amounts of cohenite [(Fe,Ni)₃C], schreibersite [(Fe,Ni)₃P], and an Fe-oxide/hydroxide phase. The fast cooling of pyroxene to the closure temperature (after equilibration at ~1200°C) and the incorporation of Si in kamacite can be interpreted as due to a shock event that took place on the meteorite parent body, consistent with the proposed formation history of ureilites parent body where a fast cooling has occurred at a later stage of its formation.     

Enstatite meteorite clasts in Almahata Sitta and other polymict ureilites: Implications for the formation of asteroid 2008 TC3 and the history of enstatite meteorite parent asteroids

The anomalous polymict ureilite Almahata Sitta (AhS) fell in 2008 when asteroid 2008 TC₃ disintegrated over Sudan and formed a strewn field of disaggregated clasts of various ureilitic and chondritic types. We studied the petrology and oxygen isotope compositions of enstatite meteorite samples from the University of Khartoum (UoK) collection of AhS. In addition, we describe the first bona fide (3.5 mm-sized) clast of an enstatite chondrite (EC) in a typical polymict ureilite, Northwest Africa (NWA) 10657. We evaluate whether 2008 TC₃ and typical polymict ureilites have a common origin, and examine implications for the history of enstatite meteorite asteroids in the solar system. Based on mineralogy, mineral compositions, and textures, the seven AhS EC clasts studied comprise one EH_a3 (S151), one EL_b3 (AhS 1002), two EH_b4-5 (AhS 2012, AhS 26), two EH_b5-6 or possibly impact melt rocks (AhS 609, AhS 41), and one EL_b6-7 (AhS 17), while the EC clast in NWA 10657 is EH_a3. Oxygen isotope compositions analyzed for five of these are similar to those of EC from non-UoK collections of AhS, and within the range of individual EC meteorites. There are no correlations of oxygen isotope composition with chemical group or subgroup. The EC clasts from the UoK collection show the same large range of types as those from non-UoK collections of AhS. The enstatite achondrite, AhS 60, is a unique type (not known as an individual meteorite) that has also been found among non-UoK AhS samples. EC are the most abundant non-ureilitic clasts in AhS but previously were thought to be absent in typical polymict ureilites, necessitating a distinct origin for AhS. The discovery of an EC in NWA 10657 changes this. We argue that the types of materials in AhS and typical polymict ureilites are essentially similar, indicating a common origin. We elaborate on a model in which AhS and typical polymict ureilites formed in the same regolith on a ureilitic daughter body. Most non-ureilitic clasts are remnants of impactors implanted at ~50–60 Myr after CAI. Differences in abundances can be explained by the stochastic nature of impactor addition. There is no significant difference between the chemical/petrologic types of EC in polymict ureilites and individual EC meteorites. This implies that fragments of the same populations of EC parent bodies were available as impactors at ~50–60 Myr after CAI and recently. This can be explained if materials excavated from various depths on EC bodies at ~50–60 Myr after CAI were reassembled into mixed layers, leaving relatively large bodies intact to survive 4 billion years. Polymict ureilites record a critical timestep in the collisional and dynamical evolution of the solar system, showing that asteroids that may have accreted at distant locations had migrated to within proximity of one another by 50–60 Myr after CAI, and providing constraints on the dynamical processes that could have caused such migrations.     

The Influence of Placement Conditions on the Swelling of Variable Clays

The swelling of clay when it is subjected to moisture increase is a complicated process found to be influenced by several factors. The clay??s level of response is highly dependent on its mineralogical composition and structure. Practicing geotechnical engineers use the placement state and general index properties to forecast the swelling behavior of the soils. The purpose of this study was to investigate the influence of placement conditions on various clays and to demonstrate that the swelling of a particular clay type should not be predicted using information and trends obtained for other clays with different origins. Clay from Saudi Arabia was used to investigate the influence of initial moisture content and initial dry density on swelling. The prediction models created by other researchers were compared to the measured values in this study. The swelling behavior of both initially dry and wet prepared bentonite was examined, and the rate at which swelling developed in the bentonite clay was studied. The role of clay content in the volume change of sand?Cbentonite mixtures was also investigated. It was concluded that the prediction of clay-swelling parameters should not be based on the properties of other clays with different origins and mineralogical compositions. The trends published in the literature should be taken as a general guide only, and the influence of moisture content and dry density on swelling should be verified for individual sites. Because clay content significantly influences the overall volume change, it should be carefully assessed in each case.     

Effect of Fibercast and Fibermesh inclusion on the direct shear and linear shrinkage response of clay

Inclusion of synthetic fibers is becoming a routine task in soil reinforcement. The ability of synthetic fibers in controlling the shrinkage cracks in concrete is the main drive to consider its benefits in clay and other soil materials. The polypropylene fibers are nonbiodegradable and can perform well even in aggressive chemical exposure conditions. The direct shear testing is a popular geotechnical approach to assess the shearing strength for a range of soils. This study is aimed at investigating the effect of fiber inclusion on the direct shear response of semi-arid clay soils. This research is conducted using two different types of polypropylene fibers, viz., Fibercast and Fibermesh, having different surface properties on the shear strength envelope and parameters (angle of internal friction and cohesion). The aspect lengths were varied as 6 and 12 mm, and the dosages were varied as 0.2, 0.4, and 0.6 % by weight of the soil. The results were viewed in relation to the fiber type, size, and dose. The soil response and shear resistance measured in consolidated undrained direct shear test is presented for the targeted doses, and the results revealed useful insight compared to unreinforced. The Fibermesh material proved to be the more appropriate fiber additive to typical semi-arid clay soils. The data provides helpful guide for the design geotechnical engineers.