Sunspots: Their rotation,their expansion in the activity zone,their links with the giant convective cells

The rotational properties of sunspots during the time interval 1977–1986 (solar cycle 21) are studied; only sunspot groups older than 4 days have been the object of this research. We have looked systematically for any kind of anomaly or fine structure in the differential rotation latitudinal profile and any significant change occurring during the course of the solar cycle.Some latitudinal bands are found where the angular rotation rate, rather than decreases according to its overall tendency, increases or is constant with the latitude. The differential rotation profile is, therefore, finely structured. The whole fine-structure pattern is affected by a slow equatorward shift. It is suggested that these fine structure features are due to the Coriolis forces acting on the meridional motions associated with giant toroidal convective cells. Some of the properties of such cells are inferred.Moreover, while the spot zone shifts equatorward, it is found to expand poleward; this expansion occurs by the addition of new belts of activity on the poleward side of the pre-existing active zone. The active zone is therefore found to consist, at the maximum activity epoch, of three different belts of spot production, each of them being centered around a local maximum-activity latitude; each of these centroids of activity is hypothesized to lie where a couple of meridional streams - associated with giant cells - converge. The activity belts are independent of each other as far as their activation, maximum, and end time, as well as their lifetime and level of activity are concerned. The angular rotation rate is correlated, in each belt, with the local level of activity.     

Orbitolinidae and Alveolinidae (Foraminiferida) from the uppermost Albian-lower Cenomanian of Monti d'Ocre (Abruzzi, Italy)

A biostratigraphic study carried out in the Monti d'Ocre area, Abruzzi, Central Apennines, allowed us to recognize Orbitolina (Conicorbitolina) moulladei ‘Strata 5 (1985) 1’, Praealveolina iberica Reichel and Praealveolina simplex Reichel in uppermost Albian–lower Cenomanian shelf-edge deposits of the Fossato Machè succession. These foraminifers have now been found for the first time in the Apennines of central Italy; their finding is quite important from a palaeobiogeographic viewpoint, as it contributes to the improvement of our knowledge on facies distribution in the circum-Mediterranean regions during the Cretaceous Period. In the study area, the coeval Monte Rotondo and Monte Orsello sections also crop out; these are characterized by bauxite deposits and stratigraphic gaps reflecting episodes of emergence on the carbonate platform. The Monte Rotondo and Monte Orsello sections accumulated in a platform back-reef environment; consequently, in this sector of the Monti d'Ocre area, the depositional environment shifted from a back-reef westward and southward to a shelf-edge northward, during the latest Albian–early Cenomanian. Owing to synsedimentary tectonics, the area investigated underwent differential subsidence: westward and southward, wide areas were uplifted and subjected to emergence, karstification and bauxite accumulation, whereas sedimentation continued in a shelf-edge environment in the north-eastern area.     

The amphipod Talitrus saltator as a bioindicator of human trampling on sandy beaches

The present paper assesses the use of the supralittoral amphipod Talitrus saltator as a bioindicator of the effects of human trampling on the supralittoral sandy band. Samplings in delimited areas were carried out at sites subjected to different human impact. The results showed a strong negative correlation between the number of swimmers and the sandhopper population density, while there was no clear relationship between sandhopper abundance and the other factors considered: granulometry, compactness and organic carbon content of the sand, and trace metal contents in the sand and sandhoppers. A field test of trampling conducted in a confined space showed its direct negative effect on sandhopper survival. However, trace metal analysis confirmed the ability of T. saltator to bioaccumulate some elements (Hg, Zn, Cu, Cd). Our study demonstrates that T. saltator is a good bioindicator of human impact in the supralittoral zone of sandy shores.     

The mafic-ultramafic complex near Finero (Ivrea-Verbano Zone), I. Chemistry of MORB-like magmas

Geochemical data are presented for the meta-igneous, mafic-ultramafic complex near Finero. This complex is in contact with a phlogopite-bearing mantle peridotite and is subdivided into the Internal Gabbro unit, the Amphibole Peridotite unit, and the External Gabbro unit. The Internal Gabbro and the Amphibole Peridotite units consist of coarse-grained, chemically heterogeneous cumulates, whereas the External Gabbro unit is generally massive, chemically more uniform and approximately representative of the residual melt with MgO contents between 6.6 and 9.1% and Mg numbers between 38 and 58. Both whole-rock and mineral contents of Ni and Cr are significantly higher (at similar Mg numbers) in the Amphibole Peridotite unit than in the Internal Gabbro unit. The most straightforward interpretation of this is that the Amphibole Peridotite unit accumulated after the influx of fresh mafic (or ultramafic) magma into the magma chamber. Major-element chemical trends are continuous from the Amphibole Peridotite unit to the External Gabbro unit and are consistent with closed-system fractionation with no further addition of magma or contamination by wall or roof rock assimilation. In the External Gabbro unit, total FeO and TiO₂ contents are strongly correlated with each other (and with P₂O₅ and Zr) and reach values as high as 19 and 4%, respectively, indicating an advanced degree of crystal fractionation along a tholeftic trend. The External Gabbro samples have generally smooth normalized trace element patterns, which are consistent with being representative of a liquid composition. The residual nature of the External Gabbro magma is also indicated by negative Eu and Sr anomalies, clear evidence for prior feldspar fractionation. REE patterns are otherwise indistinguishable from N-type MORB, but Th and U are significantly more depleted than in MORB. This Th and U depletion is similar to that found in olivine basalts and picrites on Iceland and Hawaii; its origin is not well understood. No evidence is seen for any assimilation of crystal material, in sharp contrast with the situation of the igneous complex in Val Sesia near Balmuccia, where the magma composition is dominated by assimilation of crust. We suggest that the heat provided by at most two injections of magma near Finero was insufficient to induce crystal anatexis, in contrast with the excess heat supplied by multiple magma injections at Balmuccia.     

Nucleation and crystallization of otavite, witherite, calcite, strontianite, hydrozincite, and hydrocerussite by CO2 membrane diffusion technique

Otavite, witherite, calcite, strontianite, hydrozincite and hydrocerussite nucleation was induced by CO₂ diffusion through a polyethylene membrane into a metal bearing solution. Nucleation and ongoing precipitation was followed at 25 ± 1 °C by the chemical evolution of the solution and the consumption of sodium hydroxide (pH-stat conditions). X-ray diffraction patterns as well as FT-infrared and Raman spectra confirmed the formation of well crystallized solids, except for less crystalline hydrozincite. In several experiments simonkolleite and laurionite precipitated concurrently with hydrozincite and hydrocerussite. The carbonate end-member minerals, smithsonite and cerussite, however were not formed. Carbonate minerals crystallized as spherical aggregates of thin layered otavite, spherical orientated witherite needles, rhombohedral calcite, pseudo-hexagonal strontianite laths, fibrous lumps of hydrozincite and planar hexagonal hydrocerussite crystals. Crystal and aggregate sizes range between 1 and 100 μm. Nucleation occurred at well defined reaction times and distinct critical supersaturation indices (SI_crit). The time for nucleation at constant pH decreased as the initial metal concentration increased for a given solid. The SI_crit values decreased in the order of hydrocerussite (3.2), otavite (2.5), strontianite (1.6), witherite (0.9) and calcite (0.7).     

A perturbative solution of the transfer equations for the Stokes parameters in a magnetic field

The transfer equations for the Stokes parameters, as derived under the assumption of LTE and in the general case of anomalous Zeeman multiplet, are solved by a perturbative method that reduces the system of four coupled linear differential equations to an iterative series of well known linear differential equations. The perturbation parameter turns out to be of the order of magnitude of the ratio of the Larmor frequency to the line Doppler half-width, so that the method appears to be particularly suitable for small magnetic fields.Some qualitative results on the importance of Faraday rotation and the orders of magnitude of the line profiles of the Stokes parameters are obtained.     

Dynamic response and optimal design of structures with large mass ratio TMD

This paper investigates the dynamic behavior and the seismic effectiveness of a non‐conventional Tuned Mass Damper (TMD) with large mass ratio. Compared with conventional TMD, the device mass is increased up to be comparable with the mass of the structure to be protected, aiming at a better control performance. In order to avoid the introduction of an excessive additional weight, masses already present on the structure are converted into tuned masses, retaining structural or architectural functions beyond the mere control function. A reduced order model is introduced for design purposes and the optimal design of a large mass ratio TMD for seismic applications is then formulated. The design method is specifically developed to implement High‐Damping Rubber Bearings (HDRB) to connect the device mass to the main structure, taking advantage of combining stiffness and noticeable damping characteristics. Ground acceleration is modeled as a Gaussian random process with white noise power spectral density. A numerical searching technique is used to obtain the optimal design parameter, the frequency ratio alpha, which minimizes the root‐mean‐square displacement response of the main structure. The study finally comprises shaking table tests on a 1:5 scale model under a wide selection of accelerograms, both artificial and natural, to assess the seismic effectiveness of the proposed large mass ratio TMD. Copyright © 2011 John Wiley & Sons, Ltd.     

Chemical Analysis of Iron Meteorites Using a Hand‐Held X‐Ray Fluorescence Spectrometer

We evaluate the performance of a hand‐held XRF (HHXRF) spectrometer for the bulk analysis of iron meteorites. Analytical precision and accuracy were tested on metal alloy certified reference materials and iron meteorites of known chemical composition. With minimal sample preparation (i.e., flat or roughly polished surfaces) HHXRF allowed the precise and accurate determination of most elements heavier than Mg, with concentrations > 0.01% m/m in metal alloy CRMs, and of major elements Fe and Ni and minor elements Co, P and S (generally ranging from 0.1 to 1% m/m) in iron meteorites. In addition, multiple HHXRF spot analyses could be used to determine the bulk chemical composition of iron meteorites, which are often characterised by sulfide and phosphide accessory minerals. In particular, it was possible to estimate the P and S bulk contents, which are of critical importance for the petrogenesis and evolution of Fe‐Ni‐rich liquids and iron meteorites. This study thus validates HHXRF as a valuable tool for use in meteoritics, allowing the rapid, non‐destructive (a) identification of the extraterrestrial origin of metallic objects (i.e., archaeological artefacts); (b) preliminary chemical classification of iron meteorites; (c) identification of mislabelled/unlabelled specimens in museums and private collections and (d) bulk analysis of iron meteorites.