平凉隐伏岩溶水环境同位素研究

地下水资源可持续利用的一个急待解决的重要问题,是对地下水补给和更新能力的评价.利用环境同位素技术研究地下水的补给和可更新性是当前较为新颖的方法之一.在西北干旱、半干旱的隐伏岩溶地区,地下水埋藏条件复杂,常规的地质勘探方法所能提供的水文地质信息有限,环境同位素方法在研究地下水的补给及可更新能力方面发挥了优势,可对传统方法进行补充和验证.其结果表明,研究区隐伏岩溶水形成较早,且有大量现代水的混入,平均混入量为54%.说明区内隐伏岩溶水的补给和更新能力较好.环境同位素分析结果还显示,大岔河隐伏岩溶水为一相对独立、半开放的水文地质单元,其补给来源部分为流域内大气降水、地表水的补给,部分为东南部三道沟岩溶地下水的补给;根据环境同位素EPM模型计算,地下水的滞留时间为36 a.地下水储存量为1.314×108 m3; 储水系数为7.29×10-3.这一结果与传统勘探方法的计算结果基本吻合,说明环境同位素方法的实用性.     

Rapid Measurements of Solar Wind Ions with the Triana PlasMag Faraday Cup

The Triana PlasMag Faraday Cup (FC) will be able to determine speed, flow angles, temperature, and density of the main solar wind ion species with a time resolution of better than one second. Thus, the Triana PlasMag FC will enable resolution of spatial structures as small as a few hundred kilometers as the structures convect past the spacecraft. Under typical solar wind conditions, that size is comparable to a few proton gyroradii. This revised version was published online in July 2006 with corrections to the Cover Date.     

Pre-collisional high pressure metamorphism and nappe tectonics at active continental margins: a numerical simulation

The evolution of a subduction channel and orogenic wedge is simulated in 2D for an active continental margin, with P-T paths being displayed for selected markers. In our simulation, subduction erosion affects the active margin and a structural pattern develops within a few tens of millions of years, with four zones from the trench into the forearc: (i) an accretionary complex of low grade metamorphic sedimentary material, (ii) a wedge of nappes with alternating upper and lower crustal provenance, and minor interleaving of oceanic or hydrated mantle material, (iii) a megascale melange composed of high pressure (HP) and ultra-high pressure (UHP) metamorphic rocks extruded from the subduction channel, and (iv) the upward tilted frontal part of the remaining lid. The P–T paths and time scales correspond to those typically recorded in orogenic belts. The simulation shows that HP/UHP metamorphism of continental crust does not necessarily indicate collision, but that the material can be derived from the active margin by subduction erosion and extruded from the subduction channel beneath the forearc during ongoing subduction.     

Offshore granulites from the Bay of Biscay margins: fission tracks constrain a Proterozoic to Tertiary thermal history

Zircon and apatite fission track ages were determined on granulites dredged along the Bay of Biscay margins. A sample from Ortegal Spur (Iberia margin) yielded 725 ± 67 Ma (zircon). A sample from Le Danois Bank (Iberia margin) yielded 284 ± 58 Ma (zircon), indicating post‐Variscan cooling. Apatite from this sample gave 52 ± 2 Ma, interpreted as final cooling after ‘Pyrenean’ thrust imbrication. Two other samples from Le Danois Bank have Early Cretaceous apatite ages (138 ± 7 and 120 ± 8 Ma), interpreted to result from exhumation during rifting. Finally, a granulite from Goban Spur (Armorican margin) gave 212 ± 10 Ma (apatite), coinciding with a precursory rifting phase. Together with published radiometric results, these data indicate a Precambrian high‐grade terrane at the site of the current margins. The distribution of the granulites on the seafloor reflects tectonic and erosional processes related to (a) Mesozoic rifting and (b) Early Tertiary incipient subduction of the Bay of Biscay beneath Iberia.     

Utilisation and Management Changes in South Kyrgyzstan＇s Mountain Forests

Using political ecology as its conceptual framework, this paper focuses on the changes in forest utilisation and management of South Kyrgyzstan＇s walnut-fruit forests over the last century The aim of this study on human-environment interactions is to investigate the relationship between actors on the one side, their interests and demands, and the forests and forested lands on the other. Forest resource utilisation and management - and even the recognition of different forest products as resources - are connected with political and socioeconomic conditions that change with time. The walnut-fruit forests of South Kyrgyzstan are unique, characterised by high biodiversity and a multiplicity of usable products; and they have been utilised for a long time. Centralised and formal management of the forests started with the Russian occupation and was strengthened under Soviet rule, when the region became a part of the USSR. During this era, a state forest administration that was structured from Moscow all the way down to the local level drew up detailed plans and developed procedures for utilising the different forest products. Since the collapse of the Soviet Union, the socio-political and economic frame conditions have changed significantly, which has brought not only the sweeping changes in the managing institutions, but also the access rights and interests in the forest resources. At present, the region is suffering from a high unemployment rate, which has resulted in the forests＇ gaining considerable importance in the livelihood strategies of the local population. Political and economic liberalization, increased communication and transregional exchange relations have opened the door for international companies and agents interested in the valuable forest products. Today, walnut wood and burls, walnuts, wild apples and mushrooms are all exported to various countries in the world. Scientists and members of various international organisations stress the ecological value of the forests and are trying to establish nature conservation areas. Nevertheless, it is to fear that a multiplicity of interrelated factors - the present transformation and globalization processes, the appearance of new actors, the local population＇s insecure economic situation and the erosion of managing institutions - are all leading to an intensified and unregulated exploitation of the forests, resulting in their degradation.     

The Market Gate of Miletus: damages, material characteristics and the development of a compatible mortar for restoration

The indoor exhibit of the Market Gate of Miletus is unique for an archaeological monument. The reconstruction of the gate was done in such a way that most marble fragments were removed leaving cored marble columns 3–4 cm in thickness. These cored columns were mounted on a steel construction and filled with different mortars or filled with specially shaped blocks of brick combined with mortar. All the missing marble elements were replaced by copies made of a Portland cement based concrete, which is compositionally similar to the original building materials. During the Second World War the monument was heavily damaged by aerial bombardment. For 2 years the Market Gate of Miletus was exposed to weathering, because a brick wall protecting the gate was also destroyed. The deterioration phenomena observed are microcracks, macroscopic fractures, flaking, sugaring, greying, salt efflorescence, calcitic-sinter layers and iron oxide formation etc. The rapid deterioration seems to be due to indoor atmospheric effects, and also by a combination of incompatible materials (e.g. marble, steel, mortar, concrete, bricks etc.). Compatible building materials like mortars or stone replacing materials have to be developed for the planned restoration. The requirements for restoration mortars are chemical-mineralogical and physical-mechanical compatibilities with the existing building materials. In detail this means that the mortar should ensure good bonding properties, adapted strength development and not stain the marble when in direct contact. The favoured mortar was developed with a hydraulic binder based on iron-free white cement and pozzolana based on activated clay. A special limestone and quartz sand mixture was used as an aggregate. The cement was adjusted using chemical additives. Specially designed tests were applied extensively to prove whether the developed mortar is suitable for the restoration of this precious monument.     

Sub-lethal effects of metal exposure: physiological and behavioural responses of the estuarine bivalve Macoma balthica

Variation in glycogen concentration, condition index (CI) and filtration activity were measured in the bivalve Macoma balthica buried in sediment and experimentally exposed to cadmium (Cd). The stress due to elevated but sub-lethal concentrations (300 ppb Cd) affected the overall fitness of the organism as all parameters monitored responded significantly. Lower concentrations tested (10, 30 and 100 ppb) only induced a significant decrease in filtration activity, which may play a protective role, enabling the organism to slow down its metabolic activity and preserving the integrity of its reserves (reflected by stable CI and glycogen levels). Hence, the various endpoints selected show different thresholds. Our results also demonstrate that under high exposure, small individuals loose proportionally more glycogen per unit of weight than larger ones, thus confirming the higher sensitivity of small individuals to metal contamination. Furthermore, exposure to intermediate concentration (30 ppb) seems to be beneficial to the small individuals as indicated by their high CI values compared to the control. These results showed thus that non-sigmoidal concentration-response relationship and sizes of individuals should be considered in monitoring programmes and risk assessment.     

An analysis of mixing in the frontal zone of South and North Atlantic Central Water off North-West Africa

Multi-parameter mixing analysis is applied to 26 stations of Auftrieb 75, a joint expedition of R.R.S. Discovery and FS Meteor. North Atlantic Central Water (NACW) and South Atlantic Central Water (SACW) are represented by two water types each, and phosphate, silicate and nitrate are all used as an additional parameter with temperature and salinity, yielding three sets of independent solutions. Solutions from different parameters show similar vertical distributions but can differ considerably in absolute terms. This is believed to be caused by insufficient knowledge of nutrient values of pure NACW and SACW and by low range/precision ratios of nutrient determination.It is shown that isopycnal mixing analysis correctly describes the water mass distribution to lowest order, i.e. there is agreement between results from isopycnal and multi-parameter analysis at most stations within the error bounds which are inherent in the method and which are presently very high. Significant non-isopycnal mixing could be confirmed for only one station, situated on the continental slope in the area of the undercurrent of the Canary Current upwelling regime, and may be caused by active upwelling, increased lateral and vertical shear in the under-current, or internal waves interacting with the bottom. Five stations do not yield oceanographically acceptable solutions, and an attempt is made to include a coastal water mass in the analysis in order to improve the result for these stations, i.e. three-parameter analysis for NACW and SACW is replaced by four-parameter analysis for NACW, SACW and coastal water by combining temperature and salinity with phosphate and silicate or with nitrate and silicate simultaneously (the combination phosphate and nitrate is degenerate because both nutrients are linearly correlated). This indeed improves the results, indicating the presence of coastal water at those stations, but accumulation of errors inhibits quantitative conclusions.     

A novel time-series station in the Wadden Sea (NW Germany): First results on continuous nutrient and methane measurements

In autumn 2002 a time-series station was installed in the tidal inlet between the Islands of Langeoog and Spiekeroog (Southern North Sea, NW Germany) to continuously measure physical, chemical, and meteorological parameters, even during extreme weather conditions (gale-force storms, drifting ice). Inside the pole of the station sensor tubes are installed in direction of the prevailing tidal currents. The tubes are equipped with hydrographic sensors (pressure, temperature, conductivity) and allow retrieval of water for nutrient analysis by automated instruments located inside the pole. Dissolved methane and the nutrients ammonia, nitrite, nitrate, phosphate, and silicate are measured at the station.