Estimation of dynamic friction and movement history of large landslides

We performed seismic waveform inversions and numerical landslide simulations of deep-seated landslides in Japan to understand the dynamic evolution of friction of the landslides. By comparing the forces obtained from a numerical simulation to those resolved from seismic waveform inversion, the coefficient of friction during sliding was well-constrained between 0.3 and 0.4 for landslides with volumes of 2–8 ×10⁶ m³. We obtained similar coefficients of friction for landslides with similar scale and geology, and they are consistent with the empirical relationship between the volume and dynamic coefficient of friction obtained from the past studies. This hybrid method of the numerical simulation and seismic waveform inversion shows the possibility of reproducing or predicting the movement of a large-scale landslide. Our numerical simulation allows us to estimate the velocity distribution for each time step. The maximum velocity at the center of mass is 12–36 m/s and is proportional to the square root of the elevation change at the center of mass of the landslide body, which suggests that they can be estimated from the initial DEMs. About 20% of the total potential energy is transferred to the kinetic energy in our volume range. The combination of the seismic waveform inversion and the numerical simulation helps to obtain the well-constrained dynamic coefficients of friction and velocity distribution during sliding, which will be used in numerical models to estimate the hazard of potential landslides.     

Characteristics and implication of clay minerals in the northern and southern parts of the Chelung-pu fault, Taiwan

In this study, we report the characteristics of clay minerals present in the Chelung-pu fault in Taiwan. In the 1999 Chi-Chi earthquake, different slip motions were recorded along the Chelung-pu fault in the northern and southern parts of the fault. The characteristics of clay minerals present in the fault zones can be attributed to the differences in motion. We analyzed the shallow drill core samples obtained from the northern and southern sites penetrating the fault. The clay minerals identified in most of the samples from both the sites are smectite, illite, and chlorite. There are illite–smectite mixed layers with a high illite content and no chlorite–smectite mixed layer. In some samples, no smectite is detected. We also examined the iron content and symmetry of iron and magnesium in the silicate and hydroxide layers in chlorite. At the northern site, the total iron content in chlorite of gouge is larger than that of the host rocks. On the other hand, at the southern site, the total iron content varies widely. It is hypothesized that the smectite consumption and differences in the characteristics of chlorite may be controlled by the differences in the lithology, fluid chemistry, fluid temperature, or fault activities (heating or breakage) between the northern and southern sites.     

A Polyethylene Chamber for Use in Physical Modelling of the Heat Exchange on Surfaces Exposed to a Radiation Regime

Bodies located in outdoor environments are radiatively heated in the daytime and cooled at night. Convective heat transfer is subsequently activated between the body surface and the surrounding air. To investigate these heat-exchange processes, we developed a new apparatus, referred to as a “polyethylene chamber”, for use in physical model experiments. The chamber is a 1.51-m-long tube with the ends serving as the air inlet and outlet, and is ventilated in the longitudinal direction by using an exhaust fan. The measurement section of the chamber is open but otherwise the device is covered with 0.02-mm-thick polyethylene film. Because such thin polyethylene film transmits approximately 85 % of both shortwave and longwave radiation, the model surface in the chamber is exposed to a radiation level almost equivalent to the outdoor radiation level. For example, at night the surface of the model is cooled by radiation, and subsequently, the air inside the chamber is cooled by the surface. Consequently, the outlet air temperature becomes lower than the inlet air temperature. The use of this temperature difference between the air inlet and outlet, together with other heat balance components, is a unique approach to the chamber technique for evaluating the heat exchange rate at a model’s surface. This report describes the design and heat balance of the chamber, and compares the heat-balance-based approach with another approach based on the radiation–convection balance on the model surface. To demonstrate the performance of the polyethylene chamber, two chambers were exposed to outdoor radiation on a clear night; one contained a leaf model. Air and surface temperatures were measured and the convective heat flux at the surfaces of the model and floor surface were calculated from the heat balance components of the chambers by assuming steady-state heat transfer. The fluxes agreed closely with those obtained from the radiation–convection balance at the model or floor surface. The results also clearly showed that the air flowing in the polyethylene chamber was cooled more efficiently when the model surface was installed in the chamber, even though the model surface temperature was high.     

Geochemical and isotopic characteristics of the Cretaceous Orikabe Plutonic Complex,Kitakami Mountains,Japan: magmatic evolution in a zoned pluton and significance of a subduction-related mafic parental magma

The Orikabe Plutonic Complex, northeast Japan, is a zoned pluton and one of the Cretaceous intrusions in the Circum-Pacific area. In the Main body, K-rich calc-alkaline rocks composed of marginal gabbro and a large amount of monzodiorite–quartz monzonite–monzogranite are intruded successively by innermost calc-alkaline rocks of granodiorite. The gabbro and monzodiorite–monzogranite have a continuous chemical variation, while the granodiorite has lower concentrations of K, Rb, Y, Zr, Nb and F at the same SiO₂ content. The gabbro and monzodiorite–quartz monzonite have a Rb-Sr whole-rock age of 119±12 Ma with an initial ⁸⁷Sr/⁸⁶Sr ratio of 0.70392±0.00007. The initial ⁸⁷Sr/⁸⁶Sr ratio of the innermost granodiorite is estimated to be about 0.7042. The ¹⁸O values of fresh rocks range from +6.7 to +8.3, indicating a positive correlation with SiO₂ contents. The K-rich calc-alkaline rocks were derived through fractional crystallization from a mafic parental magma with a slightly high ¹⁸O value, implying a major contribution of a sub-arc mantle at a continental margin. Trace element modeling indicates that the source could have been a fertile lherzolite enriched in LILE and depleted in HFSE. The innermost granodiorite was the differentiation product of a distinct parental magma, suggesting the involvement of a small amount of crustal component in the source and partial melting under a more hydrous condition.Editorial responsibility: J. Hoefs     

Thermal structure and paleo-heat flow in the Shimanto accretionary prism, Southwest Japan

Abstract Thermal structural analysis and paleo-heat flow estimation provide clues to understanding the thermal evolution of the accretionary complex. The thermal structure and heat flow in the Jurassic Chichibu and Cretaceous to Tertiary Shimanto accretionary complex, Southwest Japan, have been investigated by vitrinite reflectance measurement and fluid inclusion analysis. As a result, the local and multistage metamorphisms were recognized as follows. First, the Tertiary complex around the Miocene Ashizuri granite underwent exposure to extra-high temperatures. Second, the Okitsu Melange underwent exposure to higher temperatures than the surrounding strata and was formed concurrently with the Kula-Pacific ridge subduction beneath the Japanese Islands in the Eocene. Finally, the thermal structure of most of the Cretaceous and southern Jurassic complexes is independent of the geologic structure, indicating that these areas suffered thermal overprint. Regional radiometric dating studies show that most of the Cretaceous Shimanto complex was heated in the Eocene; the thermal overprint might have occurred as a result of ridge subduction. The heat flow during peak heating was estimated to be 95–120 mW/m² except for the Cretaceous Okitsu melange and the Cretaceous Nonokawa formation, north of the Okitsu Melange; a much higher value of heat flow of ~200 mW/m² was estimated in the Okitsu Melange. An estimation of heat flow failed for the non-okawa formation because thermal equilibrium between the fluid and rocks has not yet been reached. It is probable that the southern strata underwent a higher heat flow. Such a trenchward increase in heat flow resembles the present situation of the Nankai Trough, although the heat flow in the Eocene was much higher.     

Holocene paleolimnological changes in Lake Skallen Oike in the Syowa Station area of Antarctica inferred from organic components in a sediment core (Sk4C-02)

Antarctic climate changes influence environmental changes at both regional and local scales. Here we report Holocene paleolimnological changes in lake sediment core Sk4C-02 (length 378.0 cm) from Lake Skallen Oike in the Soya Kaigan region of East Antarctica inferred from analyses of sedimentary facies, a range of organic components, isotope ratios of organic carbon and nitrogen, and carbon-14 dating by Tandetron accelerator mass spectrometry. The sediment core was composed of clayish mud (378.0–152.5 cm) overlain by organic sediments (152.5 cm-surface). The age of the surface and the core bottom were 150 (AD1950-1640) and ca. 7,030 ± 73 calibrated years before present (cal BP), respectively, and the mean sedimentation rate was estimated to be 0.55 mm/year. Multi-proxy analyses revealed that the principal environmental change in the core is a transition from marine to lacustrine environments which occurred at a depth of 152.5 cm (ca. 3,590 cal BP). This was caused by relative sea level change brought about by ongoing retreat of glaciers during the mid-Holocene warming of Antarctica, and ongoing isostatic uplift which outpaced changes in global (eustatic) sea level. The mean isostatic uplift rate was calculated to be 2.8 mm/year. The coastal marine period (378.0–152.5 cm, ca. 7,030–3,590 cal BP) was characterized by low biological production with the predominance of diatoms. During the transition period from marine to freshwater conditions (152.5-approximately 135 cm, ca. 3,590–3,290 cal BP) the lake was stratified with marine water overlain by freshwater, with a chemocline and an anoxic (sulfidic) layer in the bottom of the photic zone. Green sulfur bacteria and Cryptophyta were the major photosynthetic organisms. The Cryptophyta appeared to be tolerant of the moderate salinity and stratified water conditions. The lacustrine period (approximately 135 cm-surface, ca. 3,290 cal BP-present) was characterized by high biological production by green algae (e.g. Comarium clepsydra and Oedegonium spp.) with some contributions from cyanobacteria and diatoms. Biological production during this period was 8.7 times higher than during the coastal marine period.     

A 60-year record of rainfall from the sediments of Jinheung Pond,Jeongeup, Korea

This paper describes mean grain-size data from the ¹³⁷Cs- and ²¹⁰Pb-dated sediment core BS-3 (33-cm long) recovered from Jinheung Pond, located in the southwestern part of the Korean Peninsula. Grain-size analysis of the Jinheung Pond sediments shows a clear signal for changes in annual precipitation over the past 60 years. Instrumental records of annual precipitation (AP) and the annual summation of the precipitation of >50 mm per day (AP50), which reflects the energy available for sediment transport, correlate well with the mean grain-size distributions measured in the core. The most plausible mechanism for this response in mean grain size is variations in the annual amount and intensity of precipitation. Heavy precipitation enhances soil erosion over the catchment area and increases the transport capacity of streams and rivers. Thus, coarser mean grain size should reflect higher precipitation, and smaller mean grain size should reflect lower rainfall. In the data from core BS-3, however, grain-size peaks attributed to increased annual precipitation are not prominent. This is because a dam prevents removal of fine particles from the pond via the outflow. Therefore, the mean grain-size value represents somewhat larger sediments together with fine clays. The results of this study show that sediments of dammed lakes and ponds are well suited for high-resolution environmental investigations, especially for records of changes in precipitation over time.     

Asperity Height and Aperture of an Artificial Tensile Fracture of Metric Size

Summary  A tensile fracture of about 1 m in length was created by indenting wedges in a block of granite, and the heights of the two fracture surfaces were measured using a large, non-contact surface profile measurement system with a laser profilometer to determine the aperture distribution of the fracture. Based on the measured data, the frequency characteristics of the asperity heights, the initial aperture (the aperture when the surfaces are in contact at a single point), and the size effect on the statistical properties were analyzed. The results can be summarized as follows:

Spatial and temporal variations in free polyamine distributions in Uranouchi Inlet, Japan

Polyamines are an essential component of living organisms that influence normal cell growth and development. Despite the possible importance of polyamines for marine microbial ecology, concentrations of polyamines in seawater are not well known.Using HPLC analysis with a cation exchange column and OPA reagent, we determined polyamine concentrations in seawater without carrying out desalting, concentration or derivatization steps prior to chromatography.In seawater collected from Uranouchi Inlet, putrescine and spermidine were the predominant polyamines, ranging from undetectable (N.D.) to 4.4 nM and N.D. to 2.8 nM, respectively. Though other polyamines were detected, the frequency of detection was much lower than that of putrescine and spermidine; concentrations ranged from N.D. to 0.9 nM for cadaverine, and N.D. to 3.2 nM for norspermidine. Norspermine and spermine were detected in only a few samples; their concentrations varied from N.D. to 3.2 nM and N.D. to 0.5 nM, respectively. These concentrations were higher in the summer.