Lead isotope systematics of Late Cretaceous – Tertiary Andean arc magmas and associated ores between 8°N and 40°S: evidence for latitudinal mantle heterogeneity beneath the Andes

ABSTRACT Lead isotope variability of magmatic arc rocks and associated mineralization of the Central Andes is usually considered to be the result of mixing between a homogeneous mantle and heterogeneous continental crust. About 230 new lead isotope data on the Northern and Central Andes allow us to compare for the first time lead isotope systematics of the Late Cretaceous – Tertiary arc magmatism and associated mineralization along the Andean chain between 8°N and 40°S. Lead isotope compositions indicate mixing between mantle and upper crustal rocks along the whole Andean chain. Additionally, we have found that mantle end-members of the Late Cretaceous – Tertiary magmatism are heterogeneous and systematically shifted towards less radiogenic ²⁰⁶Pb/²⁰⁴Pb compositions from north to south along the Andes. This heterogeneity most likely results from mixing between a low radiogenic mantle, possibly carrying a DMM or EM I component, and a more radiogenic mantle, possibly carrying an HIMU component. Thus, our results imply that lead isotope variability of Andean magmas at the continental scale is caused not only by crustal but also by mantle heterogeneity.     

Mechanisms of riverbank failure along the Arno River,central Italy

Riverbanks along the Arno River have been investigated with the aims of de?ning the main mechanisms of failure and retreat, their spatial distribution, and their causes. Geomorphological aspects were investigated by a reconnaissance of riverbank processes, for a number (26) of representative sites. Laboratory and in situ tests were then performed on a selected number of riverbanks (15). Based on the material characteristics, six main typologies of riverbanks have been de?ned, with homogeneous ?ne‐grained and composite banks representing the most frequent types. Slab‐type failures are the most frequent mechanism observed on ?ne‐grained banks, while cantilever failures prevail on composite banks. The role of river stage and related pore water pressure distributions in triggering the main observed mechanisms of failure has been investigated using two different types of stability analysis. The ?rst was conducted for 15 riverbanks, using the limit equilibrium method and considering simpli?ed hypotheses for pore water pressure distribution (annulment of negative pore pressures in the portion of the bank between low water stage and peak stage). Stability conditions and predicted mechanisms of failure are shown to be in reasonably good agreement with ?eld observations. Three riverbanks, representative of the main alluvial reaches of the river, were then selected for a more detailed bank stability analysis, consisting of: (a) de?nition of characteristic hydrographs of the reach with different return periods; (b) modelling of saturated and unsaturated ?ow using ?nite element seepage analysis; and (c) stability analysis with the limit equilibrium method, by adopting pore water pressure values derived from the seepage analysis. The results are compared to those obtained from the previous simpli?ed analysis, and are used to investigate the different responses, in terms of stability, to different hydrological and riverbank conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Monitoring and modelling of pore water pressure changes and riverbank stability during flow events

Pore water pressures (positive and negative) were monitored for four years (1996–1999) using a series of tensiometer‐piezometers at increasing depths in a riverbank of the Sieve River, Tuscany (central Italy), with the overall objective of investigating pore pressure changes in response to ?ow events and their effects on bank stability. The saturated/unsaturated ?ow was modelled using a ?nite element seepage analysis, for the main ?ow events occurring during the four‐year monitoring period. Modelling results were validated by comparing measured with computed pore water pressure values for a series of representative events. Riverbank stability analysis was conducted by applying the limit equilibrium method (Morgenstern‐Price), using pore water pressure distributions obtained by the seepage analysis. The simulation of the 14 December 1996 event, during which a bank failure occurred, is reported in detail to illustrate the relations between the water table and river stage during the various phases of the hydrograph and their effects on bank stability. The simulation, according to monitored data, shows that the failure occurred three hours after the peak stage, during the inversion of ?ow (from the bank towards the river). A relatively limited development of positive pore pressures, reducing the effective stress and annulling the shear strength term due to the matric suction, and the sudden loss of the con?ning pressure of the river during the initial drawdown were responsible for triggering the mass failure. Results deriving from the seepage and stability analysis of nine selected ?ow events were then used to investigate the role of the ?ow event characteristics (in terms of peak stages and hydrograph characteristics) and of changes in bank geometry. Besides the peak river stage, which mainly controls the occurrence of conditions of instability, an important role is played by the hydrograph characteristics, in particular by the presence of one or more minor peaks in the river stage preceding the main one. Copyright © 2004 John Wiley & Sons, Ltd.     

Determination of Lithium, Beryllium and Boron at Trace Levels by Laser Ablation-Inductively Coupled Plasma-Sector Field Mass Spectrometry

The analytical capabilities of laser ablation (LA)-ICP-MS in determining Li, Be and B at trace levels in geological samples have been tested on a series of glass reference materials and natural samples. The LA-ICP-MS instrument used consisted of a sector-field ICP-MS coupled with a laser ablation microprobe operating at either 266 or 213 nm wavelength. Reference glasses from NIST (SRM 612, 614 and 616) and MPI-DING (KL2-G, ML3B-G, StHs6/80-G, GOR128-G, GOR132-G, T1-G and ATHO-G) were selected to develop the analytical method and to assess the best instrumental configuration. A series of calcic amphiboles with different Li, Be and B concentrations were also analysed using both LA-ICP-MS and SIMS to test the applicability of the method to natural minerals. Results indicated that with a spot size of 40 μm the agreement between measured and reference values of Li, Be and B is generally better than 10% for NIST SRM 612 and 20% for NIST SRM 614. Average reproducibility at the 2s level was 10% for Li, 20% for Be and 15% for B. Limits of detection were approximately 100 ng g^-1 for Be and B and 200 ng g^-1 for Li. These results were confirmed by analyses carried out on natural amphiboles and compared well in terms of precision and accuracy with those commonly achieved by SIMS.     

Turbulent Transfer Between Street Canyons and the Overlying Atmospheric Boundary Layer

The turbulent exchange of momentum between a two-dimensional cavity and the overlying boundary layer has been studied experimentally, using hot-wire anemometry and particle image velocimetry (PIV). Conditions within the boundary layer were varied by changing the width of the canyons upstream of the test canyon, whilst maintaining the square geometry of the test canyon. The results show that turbulent transfer is due to the coupling between the instabilities generated in the shear layer above the canyons and the turbulent structures in the oncoming boundary layer. As a result, there is no single, unique velocity scale that correctly characterizes all the processes involved in the turbulent exchange of momentum across the boundary layer. Similarly, there is no single velocity scale that can characterize the different properties of the turbulent flow within the canyon, which depends strongly on the way in which turbulence from the outer flow is entrained into the cavity and carried round by the mean flow. The results from this study will be useful in developing simple parametrizations for momentum exchange in the urban canopy, in situations where the street geometry consists principally of relatively long, uniform streets arranged in grid-like patterns; they are unlikely to be applicable to sparse geometries composed of isolated three-dimensional obstacles.     

Mapping fractional landscape soils and vegetation components from Hyperion satellite imagery using an unsupervised machine-learning workflow

An unsupervised machine-learning workflow is proposed for estimating fractional landscape soils and vegetation components from remotely sensed hyperspectral imagery. The workflow is applied to EO-1 Hyperion satellite imagery collected near Ibirací, Minas Gerais, Brazil. The proposed workflow includes subset feature selection, learning, and estimation algorithms. Network training with landscape feature class realizations provide a hypersurface from which to estimate mixtures of soil (e.g. 0.5 exceedance for pixels: 75% clay-rich Nitisols, 15% iron-rich Latosols, and 1% quartz-rich Arenosols) and vegetation (e.g. 0.5 exceedance for pixels: 4% Aspen-like trees, 7% Blackberry-like trees, 0% live grass, and 2% dead grass). The process correctly maps forests and iron-rich Latosols as being coincident with existing drainages, and correctly classifies the clay-rich Nitisols and grasses on the intervening hills. These classifications are independently corroborated visually (Google Earth) and quantitatively (random soil samples and crossplots of field spectra). Some mapping challenges are the underestimation of forest fractions and overestimation of soil fractions where steep valley shadows exist, and the under representation of classified grass in some dry areas of the Hyperion image. These preliminary results provide impetus for future hyperspectral studies involving airborne and satellite sensors with higher signal-to-noise and smaller footprints.     

The amphipod Talitrus saltator as a bioindicator of human trampling on sandy beaches

The present paper assesses the use of the supralittoral amphipod Talitrus saltator as a bioindicator of the effects of human trampling on the supralittoral sandy band. Samplings in delimited areas were carried out at sites subjected to different human impact. The results showed a strong negative correlation between the number of swimmers and the sandhopper population density, while there was no clear relationship between sandhopper abundance and the other factors considered: granulometry, compactness and organic carbon content of the sand, and trace metal contents in the sand and sandhoppers. A field test of trampling conducted in a confined space showed its direct negative effect on sandhopper survival. However, trace metal analysis confirmed the ability of T. saltator to bioaccumulate some elements (Hg, Zn, Cu, Cd). Our study demonstrates that T. saltator is a good bioindicator of human impact in the supralittoral zone of sandy shores.     

Impacts of maintenance channel dredging in a northern Adriatic coastal lagoon. II: Effects on macrobenthic assemblages in channels and ponds

Coastal lagoons are ephemeral habitats whose conservation requires human intervention, such as maintenance dredging of inner channels. Dredging can reduce the abundance of benthic species due to the removal of individuals with the sediment, modify sediment properties, and resuspend fine sediment, nutrients and pollutants, which can lead to eutrophication, hypoxic events and increasing toxicity. Both direct effects in the dredged channel and possible indirect effects in surrounding shallow areas could be expected. This study assesses the effects of the channel maintenance dredging, performed between October 2004 and August 2005, on the invertebrate assemblages both in channels and adjacent ponds in the northern Adriatic coastal lagoon of Pialassa Baiona. The lagoon is affected by eutrophication, chemical and thermal pollution from wastewater treatment and power plants. Three impacted sites were located in the dredged channel and three in the adjacent interconnected shallow water ponds, while three non-impacted sites were located in a channel and in a pond far from the dredged area. Replicate samples were collected from each site one time before and one time after the dredging operations. Despite the extent of the intervention, effects of the dredging on macrobenthic assemblages were detected only within the dredged channel, while in the surrounding ponds no clear and unequivocal effects were found. In particular the dredging could have promoted the increase of the abundance of the polychaete Streblospio shrubsolii in the southern and central parts of the dredged channel and the increase in abundance of the amphipod Corophium insidiosum in the northern side, compared to the controls. Instead, species diversity was reduced in the central and northern parts of the dredged channel. These effects on the macrobenthic invertebrate assemblages could be related to the observed changes of sediment characteristics, contamination and toxicity. Overall, direct effects on benthic assemblages in the dredged channels were more detectable than the possible secondary effects in the surrounding shallow ponds, where the higher spatial heterogeneity can mask any relevant effects.