The effects of possible contamination by sample holders on samples to be returned by Hayabusa2

Chemical compositions of materials used for new sample holders (vertically aligned carbon nanotubes [VACNTs] and polyimide film), which were developed for the analysis of Hayabusa2‐return samples, were determined by instrumental neutron activation analysis and/or instrumental photon activation analysis, to estimate contamination effects from the sample holders. The synthetic quartz plate used for the sample holders was also analyzed. Ten elements (Na, Al, Cr, Mn, Fe, Ni, Eu, W, Au, and Th) and 14 elements (Na, Al, K, Sc, Ti, Cr, Zn, Ga, Br, Sb, La, Eu, Ir, and Au) could be detected in the VACNTs and polyimide film, respectively. The VACNT data show that contamination by this material with respect to the Murchison meteorite is negligible in terms of the elemental ratios (e.g., Fe/Mn, Na/Al, and Mn/Cr) used for the classification of meteorites due to the extremely low density of VACNTs. However, for the Au/Cr ratio, even small degrees (1.7 wt%) of contamination by VACNTs will change the Au/Cr ratio. Elemental ratios used for the classification of meteorites are only influenced by large amounts of contamination (>60 wt%) of polyimide film, which is unlikely to occur. In contrast, detectable effects on Ti isotopic compositions are caused by >0.1 and >0.3 wt% contamination by VACNTs and polyimide film, respectively, and Hf isotopic changes are caused by >0.1 wt% contamination by VACNTs. The new sample holders (VACNTs and polyimide film) are suitable for chemical classification of Hayabusa2‐return samples, because of their ease of use, applicability to multiple analytical instruments, and low contamination levels for most elements.     

High resolution velocity analysis of ocean bottom seismometer data by theτ-p method

A method of high resolution seismic velocity analysis for ocean bottom seismometer (OBS) records is applied to the study of the shallow oceanic crust, especially sedimentary and basement layers. This method is based on the direct-p mapping and the-sum inversion. We use data obtained from a 1989 airgun-OBS experiment in the northern Yamato Basin, Japan Sea and derive P- and S-wave velocity functions that can be compared with the seismic reflection profiles. Using split-spread profile records, we obtain interface dips and true interval velocities from the OBS data. These results show good agreement with the reflection profile records, the acoustic velocities of core samples, and sonic log profiles. We also present a method for estimating errors in the derived velocity functions by calculating covariance of the derived layers' thicknesses. The estimated depth errors are about 150 m at shallow depths, which is close to the seismic wavelength used. The high resolution of this method relies on accurate determination of shot positions by GPS, spatially dense seismic observations, and the use of unsaturated reflected waves arriving after the direct water wave that are observed on low-gain component records.     

40Ar/39Ar age of material returned from asteroid 25143 Itokawa

The Hayabusa mission to asteroid 25143, Itokawa, brought back 2000 small particles, which most closely resemble material found in LL4‐6 chondrites. We report an ⁴⁰Ar/³⁹Ar age of 1.3 ± 0.3 Ga for a sample of Itokawa consisting of three grains with a total mass of ~2 μg. This age is lower than the >4.0 Ga ages measured for 75% of LL chondrites but close to one for Y‐790964 and its pairs. The flat ⁴⁰Ar/³⁹Ar release spectrum of the sample suggests complete degassing 1.3 Ga ago. Recent solar heating in Itokawa's current orbit does not appear likely to have reset that age. Solar or impact heating 1.3 Ga ago could have done so. If impact heating was responsible, then the 1.3 Ga age sets an upper bound on the time at which the Itokawa rubble pile was assembled and suggests that rubble pile creation was an ongoing process in the inner solar system for at least the first 3 billion years of solar system history.     

Characteristics of an atypical large-meander path of the Kuroshio current south of Japan formed in September 2017

Since September 2017, the Kuroshio has taken a large-meander (LM) path in the region south of Japan. We examined characteristics of the 2017–present LM path in comparison with previous LM paths, using tide gauge, altimetric sea surface height, and bottom pressure data. The 2017–present LM path was formed from a path passing through a channel south of Hachijo-jima Island, while a typical LM path originated from a path through a channel north of Miyake-jima Island. The meander trough of this atypical path was found to be shifted far to the east and to vary on a timescale of months. These characteristics are different from those of a typical LM path but they are similar to those of the 1981–1984 LM path. Therefore, we identified two types of LM path; a stable and unstable LM paths. The 2017–present unstable type large meander has a zonal scale greater than that of the 2004–2005 stable type large meander and protrudes from the eastern boundary of the Shikoku Basin, i.e., Izu-Ogasawara Ridge. No significant bottom pressure depression was observed, associated with the formation of the 2017–present LM path, indicating that baroclinic instability was not important in the formation of this LM path. Due to no significant bottom steering, even during the 2017–present LM period, a mesoscale current path disturbance occurred southeast of Kyushu, propagated eastward, and amplified the offshore displacement of the Kuroshio.

     

Hayabusa‐returned sample curation in the Planetary Material Sample Curation Facility of JAXA

Abstract– The Planetary Material Sample Curation Facility of JAXA (PMSCF/JAXA) was established in Sagamihara, Kanagawa, Japan, to curate planetary material samples returned from space in conditions of minimum terrestrial contaminants. The performances for the curation of Hayabusa‐returned samples had been checked with a series of comprehensive tests and rehearsals. After the Hayabusa spacecraft had accomplished a round‐trip flight to asteroid 25143 Itokawa and returned its reentry capsule to the Earth in June 2010, the reentry capsule was brought back to the PMSCF/JAXA and was put to a series of processes to extract recovered samples from Itokawa. The particles recovered from the sample catcher were analyzed by electron microscope, given their ID, grouped into four categories, and preserved in dimples on quartz slide glasses. Some fraction of them has been distributed for initial analyses at NASA, and will be distributed for international announcement of opportunity (AO), but a certain fraction of them will be preserved in vacuum for future analyses.     

Investigation of cutting methods for small samples of Hayabusa and future sample return missions

We report the investigation of cutting methods for Hayabusa samples. The purpose of our study is to explore the possibility of applying multiple analyses to a single particle effectively. We investigated the cutting performance of a blade dicing saw, laser, focused ion beam (FIB), and physical breaking by microindenter. Cutting performance was examined by estimating the aspect ratio of the cut slit, i.e., depth over width of the slit. We also investigated the possible contamination and sample damage by cutting. The result of the investigation shows that we can cut the samples from <50 μm to 500 μm using those methods with aspect ratios from 10 to 20, although they would introduce some contamination or damage to the samples. Our investigations also provide an important basis for the analysis of samples obtained by future sample return missions.     

Three‐dimensional microstructure of samples recovered from asteroid 25143 Itokawa: Comparison with LL5 and LL6 chondrite particles

In this study, the three‐dimensional (3‐D) microstructure of 48 Itokawa regolith particles was examined by synchrotron microtomography at SPring‐8 during the preliminary examination of Hayabusa samples. Moreover, the 3‐D microstructure of particles collected from two LL6 chondrites (Ensisheim and Kilabo meteorites) and an LL5 chondrite (Tuxtuac meteorite) was investigated by the same method for comparison. The modal abundances of minerals, especially olivine, bulk density, porosity, and grain size are similar in all samples, including voids and cracks. These results show that the Itokawa particles, which are surface materials from the S‐type asteroid Itokawa, are consistent with the LL chondrite materials in terms of not only elemental and isotopic composition of the minerals but also 3‐D microstructure. However, we could not determine whether the Itokawa particles are purely LL5, LL6, or a mixture of the two. No difference between the particles collected from Rooms A and B of the sample chamber, corresponding to the sampling sequence of the spacecraft's second and first touchdowns, respectively, was detected because of the statistically small amount of particles from Room B.     

Crystallization temperature determination of Itokawa particles by plagioclase thermometry with X‐ray diffraction data obtained by a high‐resolution synchrotron Gandolfi camera

The crystallization temperatures of Itokawa surface particles recovered by the space probe Hayabusa were estimated by a plagioclase geothermometer using sodic plagioclase triclinicity. The Δ131‐index required for the thermometer, which is the difference in X‐ray diffraction peak positions between the 131 and 11 reflections of plagioclase, was obtained by a high‐resolution synchrotron Gandolfi camera developed for the third generation synchrotron radiation beamline, BL15XU at SPring‐8. Crystallization temperatures were successfully determined from the Δ131‐indices for four particles. The observed plagioclase crystallization temperatures were in a range from 655 to 660 °C. The temperatures indicate crystallization temperatures of plagioclases in the process of prograde metamorphism before the peak metamorphic stage.     

High-temperature compression experiments of CaSiO3 perovskite to lowermost mantle conditions and its thermal equation of state

In order to examine pressure–volume–temperature (P–V–T) relations for CaSiO₃ perovskite (Ca-perovskite), high-temperature compression experiments with in situ X-ray diffraction were performed in a laser-heated diamond anvil cell (DAC) to 127 GPa and 2,300 K. We also employed an external heating system in the DAC in order to obtain P–V data at a moderate temperature of 700 K up to 113 GPa, which is the reference temperature for constructing an equation of state. The P–V data at 700 K were fitted to the second-order Birch–Murnaghan equation of state, yielding K _700,1bar = 207 ± 4 GPa and V _700,1bar = 46.5 ± 0.1 Å³. Thermal pressure terms were evaluated in the framework of the Mie–Grüneisen–Debye model, yielding γ _700,1bar = 2.7 ± 0.3, q _700,1bar = 1.2 ± 0.8, and θ _700,1bar = 1,300 ± 500 K. A thermodynamic thermal pressure model was also employed, yielding α_700,1bar = 5.7 ± 0.5 × 10^?5/K and (?K/?T) _V  = ?0.010 ± 0.004 GPa/K. Computed densities along a lower mantle geotherm demonstrate that Ca-perovskite is denser than the surrounding lower mantle, suggesting that Ca-perovskite-rich rocks do not rise up through the lower mantle. One of such rocks might be a residue of partial melting of subducted mid-oceanic ridge basalt (MORB) at the base of the mantle. Since the partial melt is FeO-rich and therefore denser than the mantle, all the components of subducted MORB may not return to shallow levels.     

P-wave velocity structure of the margin of the southeastern Tsushima Basin in the Japan Sea using ocean bottom seismometers and airguns

The Tsushima Basin is located in the southwestern Japan Sea, which is a back-arc basin in the northwestern Pacific. Although some geophysical surveys had been conducted to investigate the formation process of the Tsushima Basin, it remains unclear. In 2000, to clarify the formation process of the Tsushima Basin, the seismic velocity structure survey with ocean bottom seismometers and airguns was carried out at the southeastern Tsushima Basin and its margin, which are presumed to be the transition zone of the crustal structure of the southwestern Japan Island Arc. The crustal thickness under the southeastern Tsushima Basin is about 17 km including a 5 km thick sedimentary layer, and 20 km including a 1.5 km thick sedimentary layer under its margin. The whole crustal thickness and thickness of the upper part of the crust increase towards the southwestern Japan Island Arc. On the other hand, thickness of the lower part of the crust seems more uniform than that of the upper part. The crust in the southeastern Tsushima Basin has about 6 km/s layer with the large velocity gradient. Shallow structures of the continental bank show that the accumulation of the sediments started from lower Miocene in the southeastern Tsushima Basin. The crustal structure in southeastern Tsushima Basin is not the oceanic crust, which is formed ocean floor spreading or affected by mantle plume, but the rifted/extended island arc crust because magnitudes of the whole crustal and the upper part of the crustal thickening are larger than that of the lower part of the crustal thickening towards the southwestern Japan Island Arc. In the margin of the southeastern Tsushima Basin, high velocity material does not exist in the lowermost crust. For that reason, the margin is inferred to be a non-volcanic rifted margin. The asymmetric structure in the both margins of the southeastern and Korean Peninsula of the Tsushima Basin indicates that the formation process of the Tsushima Basin may be simple shear style rather than pure shear style.