Assessing land use/cover changes: a nationwide multidate spatial database for Mexico

A nationwide multidate GIS database was generated in order to carry out the quantification and spatial characterization of land use/cover changes (LUCC) in Mexico. Existing cartography on land use/cover at a 1:250,000 scale was revised to select compatible inputs regarding the scale, the classification scheme and the mapping method. Digital maps from three different dates (the late 1970s, 1993 and 2000) were revised, evaluated, corrected and integrated into a GIS database. In order to improve the reliability of the database, an attempt was made to assess the accuracy of the digitalisation procedure and to detect and correct unlikely changes due to thematic errors in the maps. Digital maps were overlaid in order to generate LUCC maps, transition matrices and to calculate rates of conversion. Based upon this database, rates of deforestation between 1976 and 2000 were evaluated as 0.25 and 0.76% per year for temperate and tropical forests, respectively.     

Validation of MODIS Vegetation Continuous Fields for monitoring deforestation and forest degradation: two cases in Mexico

This study assesses whether MODIS Vegetation Continuous Fields percent tree cover (PTC) data can detect deforestation and forest degradation. To assess the usefulness of PTC for detecting deforestation, we used a data set consisting of eight forest and seven non-forest categories. To evaluate forest degradation, we used data from two temperate forest types in three conservation states: primary (dense), secondary (moderately degraded) and open (heavily degraded) forest. Our results show that PTC can differentiate temperate forest from non-forest categories (p = 0.05) and thus suggests PTC can adequately detect deforestation in temperate forests. In contrast, single-date PTC data does not appear to be adequate to detect forest degradation in temperate forests. As for tropical forest, PTC can partially discriminate between forest and non-forest categories.     

Anticipating the effects of groundwater withdrawal on seawater intrusion and soil settlement in urban coastal areas

Intensive pumping in urban coastal areas is a common threat to water resource quality due to seawater intrusion. In those areas where subsurface water resources are not usually used for human consumption or irrigation, intensive pumping is associated with other activities like the lowering of the water table necessary to support underground structures and building foundations. This activity also increases the likelihood of soil settlement that affects building stability and the corrosion of concrete structures due to groundwater salinity. Under these circumstances, the awareness of a certain municipality (Calonge, NE Spain) of the potential effects of groundwater withdrawal upon foundations has led to an integrated approach to anticipate seawater intrusion related to urban development. Geological mapping and correlation of borehole logs, electrical resistivity tomography, and hydrochemical data provide comprehensive knowledge of the geology and hydrogeology of the area and act as screening tools necessary to discern the influence of hydrological processes in coastal areas. Developing Strack's analytical solution, new comprehensive, dimensionless expressions are herein derived to determine the critical pumping rate necessary to prevent seawater intrusion, as well as to reproduce the evolution of the wedge toe and the water table stagnation point under different withdrawal rates. Furthermore, the Dupuit–Forchheimer well discharge formula allows the estimation of the effects of the water table lowering due to such critical pumping in the surrounding building foundations. Field data from the Calonge coastal plain illustrate this approach and provide assessment criteria for future urban development and planning. Copyright © 2012 John Wiley & Sons, Ltd.     

Prediction of uniaxial compression PFC3D model micro‐properties using artificial neural networks

Artificial neural networks are used to predict the micro‐properties of particle flow code in three dimensions (PFC3D) models needed to reproduce macro‐properties of cylindrical rock samples in uniaxial compression tests. Data for the training and verification of the networks were obtained by running a large number of PFC3D models and observing the resulting macro‐properties. Four artificial networks based on two different architectures were used. The networks used different numbers of input parameters to predict the micro‐properties. Multi‐layer perceptron networks using Young's modulus, Poisson's ratio, uniaxial compressive strength, model particle resolution and the maximum‐to‐minimum particle ratio showed excellent performance in both training and verification. Adding one more variable—namely, minimum particle radius—showed degrading performance. Copyright © 2009 John Wiley & Sons, Ltd.     

Harmful microalgae blooms (HAB); problematic and conditions that induce them

HAB occurrence is becoming more frequent and problematic in marine recreational waters. However, the exploitation of the coastal area for recreational use is promoting the necessary conditions for the HAB increase. In terms of the harmful effects, we can consider two types of causative organism: the toxic producers and the high-biomass producers. Toxic events can be produced by a very low concentration of the causative organism. This characteristic implies a difficulty for the monitoring programs in relation to human health. It is important to point out in the context of human health and HAB events, that in some coastal regions (e.g. the Mediterranean basin) HABs are an emerging problem. In these regions, the local population and visitors may face a health risk that is difficult to measure. The monitoring of toxic species has mainly been associated -with shellfish farming. However, the risk of intoxication could become even greater in areas not subject to legislation of aquaculture activities.     

Subsidence and thermal history of an inverted Late Jurassic‐Early Cretaceous extensional basin (Cameros,North‐central Spain) affected by very low‐ to low‐grade metamorphism

The Cameros Basin (North Spain) is a Late Jurassic‐Early Cretaceous extensional basin, which was inverted during the Cenozoic. It underwent a remarkable thermal evolution, as indicated by the record of anomalous high temperatures in its deposits. In this study, the subsidence and thermal history of the basin is reconstructed, using subsidence analysis and 2D thermal modelling. Tectonic subsidence curves provide evidence of the occurrence of two rapid subsidence phases during the syn‐extensional stage. In the first phase (Tithonian‐Early Berriasian), the largest accommodation space was formed in the central sector of the basin, whereas in the second (Early Barremian‐Early Albian), it was formed in the northern sector. These rapid subsidence phases could correspond to relevant tectonic events affecting the Iberian Plate at that time. By distinguishing between the initial and thermal subsidence and defining their relative magnitudes, Royden's (1986) method was used to estimate the heat flow at the end of the extensional stage. A maximum heat flow of 60–65 mW/m² is estimated, implying only a minor thermal disturbance associated with extension. In contrast with these data, very high vitrinite reflectance, anomalously distributed in some case with respect to the typical depth‐vitrinite reflectance relation, was measured in the central‐northern sector of the basin. Burial and thermal data are used to construct a 2D thermal basin model, to elucidate the role of the processes involved in sediment heating. Calibration of the thermal model with the vitrinite reflectance (%Ro) and fluid inclusion (FI) data indicates that in the central and northern sectors of the basin, an extra heat source, other than a typical rift, is required to explain the observed thermal anomalies. The distribution of the %Ro and FI values in these sectors suggests that the high temperatures and their distribution are related to the circulation of hot fluids. Hot fluids were attributed to the hydrothermal metamorphic events affecting the area during the early post‐extensional and inversion stages of the basin.     

Pathways and distances of fluid flow during low-grade metamorphism: evidence from pyrite deposits of the Cameros Basin, Spain

New geochemical and sulphur isotopic data are presented for a number of pyrite deposits from the Late Jurassic–Early Cretaceous Cameros Basin, Spain. The deposits were formed at, or close to, the peak of metamorphism and are always related to sandstone units in the mainly metapelite sequence. Iron remained immobile and conservative, pyrite iron being derived by sulphidation of chlorite in the host metapelites. Reduced sulphur, however, was supplied from two external sources: thermochemical reduction of sulphate and release of S during metamorphism of sedimentary sulphides. These sources provided isotopically heavy and light S, respectively, with variation in pyrite isotopic composition between different deposits resulting from differences in their relative importance at each site. During metamorphism, the sandstone units acted as aquifers, carrying the sulphidic pore waters to locations where permeability provided by syn-depositional fractures on a scale of 0.5–5  m allowed its interaction with the metapelites. Transport distances for sulphide during metamorphism were of the order of hundreds of metres.     

Accuracy assessment of the Mexican National Forest Inventory map: A study in four ecogeographical areas

The accuracy of the Mexican National Forest Inventory (NFI) map is derived in four distinct ecogeographical areas, using an assessment design tailored for the project. A main achievement of the design was to integrate the high diversity of classes encompassed at the most detailed subcommunity level of the classification scheme within a cost‐controlled statistically sound assessment. A hybrid double sampling strategy was applied to the 2.5 million‐ha study area. A total of 5955 reference sites were verified against their NFI map label. The availability of detailed quasi‐synchronous reference data for the 2000 Landsat‐derived NFI and the high diversity of mapped classes allowed a careful thematic analysis on the selected regions, relevant for national extrapolation. Global accuracy estimates of 64–78 per cent were registered among the four ecogeographical areas (two with mainly temperate climate and the other two with mainly tropical climate), with the lower accuracy levels found in areas more densely covered with forests. According to the estimates, the NFI map tends to underestimate the presence of temperate forest (especially oak) and overestimate the presence of tropical forest in the areas investigated. The analysis of confusions reveals difficulties in unambiguously interpreting or labelling forests with secondary vegetation, herbaceous and/or shrub‐like vegetation as well as distinguishing between aquatic vegetation types. The design proved useful from the perspective of accuracy assessments of regional maps in biodiverse regions.     

Tuning the second-generation SDI: theoretical aspects and real use cases

Spatial data infrastructure (SDI) actors have great expectations for the second-generation SDI currently under development. However, SDIs have many implementation problems at different levels that are delaying the development of the SDI framework. The aims of this article are to identify these difficulties, in the literature and based on our own experience, in order to determine how mature and useful the current SDI phenomena are. We can then determine whether a general reconceptualization is necessary or rather a set of technical improvements and good practices needs to be developed before the second-generation SDI is completed. This study is based on the following aspects: metadata about data and services, data models, data download, data and processing services, data portrayal and symbolization, and mass market aspects. This work aims to find an equilibrium between user-focused geoportals and web service interconnection (the user side vs. the server side). These deep reflections are motivated by a use case in the healthcare area in which we employed the Catalan regional SDI. The use case shows that even one of the best regional SDI implementations can fail to provide the required information and processes even when the required data exist. Several previous studies recognize the value of applying Web 2.0 and user participation approaches but few of these studies provide a real implementation. Another objective of this work is to show that it is easy to complement the classical, international standard-based SDI with a participative Web 2.0 approach. To do so, we present a mash-up portal built on top of the Catalan SDI catalogues.