Frequency distributions and correlations of solar X-ray flare parameters

We have determined frequency distributions of flare parameters from over 12000 solar flares recorded with the Hard X-Ray Burst Spectrometer (HXRBS) on the Solar Maximum Mission (SMM) satellite. These parameters include the flare duration, the peak counting rate, the peak hard X-ray flux, the total energy in electrons, and the peak energy flux in electrons (the latter two computed assuming a thick-target flare model). The energies were computed above a threshold energy between 25 and 50 keV. All of the distributions can be represented by power laws above the HXRBS sensitivity threshold. Correlations among these parameters are determined from linear regression fits as well as from the slopes of the frequency distributions. Variations of the frequency distributions were investigated with respect to the solar activity cycle.Theoretical models for the frequency distribution of flare parameters depend on the probability of flaring and the temporal evolution of the flare energy build-up. Our results are consistent with stochastic flaring and exponential energy build-up, with an average build-up time constant that is 0.5 times the mean time between flares. The measured distributions of flares are also consistent with predicted distributions of flares from computer simulations of avalanche models that are governed by the principle of self-organized criticality.     

Benthic photosynthesis in submerged Wadden Sea intertidal flats

In this study we compare benthic photosynthesis during inundation in coarse sand, fine sand, and mixed sediment (sand/mud) intertidal flats in the German Wadden Sea. In situ determinations of oxygen-, DIC- and nutrient fluxes in stirred benthic chamber incubations were combined with measurements of sedimentary chlorophyll, incident light intensity at the sediment surface and scalar irradiance within the sediment. During submergence, microphytobenthos was light limited at all study sites as indicated by rapid response of gross photosynthesis to increasing incident light at the sea floor. However, depth integrated scalar irradiance was 2 to 3 times higher in the sands than in the mud. Consequently, gross photosynthesis in the net autotrophic fine sand and coarse sand flats during inundation was on average 4 and 11 times higher than in the net heterotrophic mud flat, despite higher total chlorophyll concentration in mud. Benthic photosynthesis may be enhanced in intertidal sands during inundation due to: (1) higher light availability to the microphytobenthos in the sands compared to muds, (2) more efficient transport of photosynthesis-limiting solutes to the microalgae with pore water flows in the permeable sands, and (3) more active metabolic state and different life strategies of microphytobenthos inhabiting sands.     

The Western European PSSA—Testing a unique international concept to protect imperilled marine ecosystems

Particularly Sensitive Sea Areas (PSSAs) are a tool designed to protect vulnerable marine areas from vessel-source pollution through measures approved by the governing body, the International Maritime Organisation. Recent developments triggered by the proposal to designate, amongst others, a large part of the Western European Atlantic a PSSA have brought the instrument to a decisive stage. Although the proposal appears to be lawful, its implications for the concept, which this paper seeks to assess, are questionable. The significance of the instrument is at risk if it is overused. As a consequence, new protective mechanisms should be contemplated.     

Exploration of remotely sensed forest structure and ultrasonic range sensor metrics to improve empirical snow models

Current methods to estimate snow accumulation and ablation at the plot and watershed levels can be improved as new technologies offer alternative approaches to more accurately monitor snow dynamics and their drivers. Here we conduct a meta‐analysis of snow and vegetation data collected in British Columbia to explore the relationships between a wide range of forest structure variables – obtained from Light Detection and Ranging (LiDAR), hemispherical photography (HP) and Landsat Thematic Mapper – and several indicators of snow accumulation and ablation estimated from manual snow surveys and ultrasonic range sensors. By merging and standardizing all the ground plot information available in the study area, we demonstrate how LiDAR‐derived forest cover above 0.5 m was the variable explaining the highest percentage of absolute peak snow water equivalent (SWE) (33%), while HP‐derived leaf area index and gap fraction (45° angle of view) were the best potential predictors of snow ablation rate (explaining 57% of variance). This study reveals how continuous SWE data from ultrasonic sensors are fundamental to obtain statistically significant relationships between snow indicators and structural metrics by increasing mean r² by 20% when compared to manual surveys. The relationships between vegetation and spectral indices from Landsat and snow indicators, not explored before, were almost as high as those shown by LiDAR or HP and thus point towards a new line of research with important practical implications. While the use of different data sources from two snow seasons prevented us from developing models with predictive capacity, a large sample size helped to identify outliers that weakened the relationships and suggest improvements for future research. A concise overview of the limitations of this and previous studies is provided along with propositions to consistently improve experimental designs to take advantage of remote sensing technologies, and better represent spatial and temporal variations of snow. Copyright © 2013 John Wiley & Sons, Ltd.     

Shallow sediment deformation styles in north-western Campeche Knolls,Gulf of Mexico and their controls on the occurrence of hydrocarbon seepage

During German R/V Meteor M67/2 expedition to Campeche Knolls, southern Gulf of Mexico, a set of 2D high resolution seismic data was acquired to study the near-surface sediment structure and its relationship with hydrocarbon seepages in this salt province. The comprehensive survey covered 20 individual bathymetric highs or ridges and identified three principle structural types: Passive Type, Chaopopte Type, and Asymmetric Flap Type. The first type is the result of passive diapirism, whereas the latter two were initialized by a regional compressional event in the Miocene, but are later differently modified by salt tectonism. Chapopote Type structures appear as symmetrical domes, with uplifted coarse-grained Miocene sediments in their cores and rather thin syn-kinematic sediments covering the crests. Asymmetric Flap Type structures are also first folded as domes or ridges, but one flap later subsided together with salt evacuation, resulting in single uplifted monoclines. With the coarse-grained pre-kinematic sediments as reservoir units, both structural types can focus and accumulate hydrocarbons. The geometries of the structures suggest that hydrocarbons are accumulated in the center of the Chapopote Type structures and in the subsided flaps of the Asymmetric Flap Type structures. Hydrocarbon leakage from these thinly sealed reservoirs is regarded as the principle mechanism for the seepage in the study area, and accordingly the most seepage-prone positions are above these reservoirs. The seep locations suggested by analysis of sea-surface oil slick images of SAR satellite data are also examined in this study. These independently derived seep locations confirm the seepage-prone positions to be above the shallow buried reservoirs. This study suggest that the shallow sediment structures control the distribution of the hydrocarbon seeps of the north-western Campeche Knolls, although the hydrocarbons are sourced from the greater depth.     

Combining pixel and object based image analysis of ultra-high resolution multibeam bathymetry and backscatter for habitat mapping in shallow marine waters

Habitat mapping data are increasingly being recognised for their importance in underpinning marine spatial planning. The ability to collect ultra-high resolution (cm) multibeam echosounder (MBES) data in shallow waters has facilitated understanding of the fine-scale distribution of benthic habitats in these areas that are often prone to human disturbance. Developing quantitative and objective approaches to integrate MBES data with ground observations for predictive modelling is essential for ensuring repeatability and providing confidence measures for habitat mapping products. Whilst supervised classification approaches are becoming more common, users are often faced with a decision whether to implement a pixel based (PB) or an object based (OB) image analysis approach, with often limited understanding of the potential influence of that decision on final map products and relative importance of data inputs to patterns observed. In this study, we apply an ensemble learning approach capable of integrating PB and OB Image Analysis from ultra-high resolution MBES bathymetry and backscatter data for mapping benthic habitats in Refuge Cove, a temperate coastal embayment in south-east Australia. We demonstrate the relative importance of PB and OB seafloor derivatives for the five broad benthic habitats that dominate the site. We found that OB and PB approaches performed well with differences in classification accuracy but not discernible statistically. However, a model incorporating elements of both approaches proved to be significantly more accurate than OB or PB methods alone and demonstrate the benefits of using MBES bathymetry and backscatter combined for class discrimination.     

An explosion seismology investigation of the continental margin west of the Hebrides, Scotland, at 58°N

During summer 1975, a line of large shots was fired across the continental margin between the Rockall Trough and the Hebridean shelf along 58°N. Arrivals were observed at temporary seismic stations set up across Scotland and in northwestern Ireland. A clear P₂ phase was observed to cross the margin and a converted phase P₁ also seen on the records is interpreted as travelling in the sub-sedimentary oceanic crust of Rockall Trough and in the upper continental crust beneath the shelf.The continental crust beneath the Hebridean shelf is estimated to be 27 ± 2 km thick, with P_g = 6.22 ± 0.03 km/s and P_n = 8.01 ± 0.04 km/s as determined by time-term analysis. P_g delays on the outer shelf are interpreted in terms of a seaward thickening wedge of Mesozoic sediments which pre-date the split. P_n beneath the Rockall Trough was poorly determined at 8.20 ± 0.17 km/s and the Moho is estimated to be 18 ± 2 km deep at 58°N. This and other seismic and gravity work indicates a northward thickening of the crust along the Rockall Trough, accounting for the northward decrease in the height of the slope.Our results, and those of gravity interpretations, indicate a relatively abrupt transition between continental and oceanic crust, possibly correlating with the lack of major shelf subsidence. This is attributed to a relatively cool origin for this margin. The main thinning of the continental crust beneath the slope is attributed to outslip of continental crustal material into and beneath the newly forming oceanic crust during the first few million years after the split, possibly enhanced by pre-split stretching.     

Energy and tectonics of Fennoscandian earthquakes

Energy-time release curves are calculated for Swedish and for Fennoscandian earthquakes, both curves exhibiting a sharp break around the year 1910. The similarity of this behaviour with world-wide energy release curves suggests that Fennoscandian earthquakes are related to the global tectonics, probably via plate motions on the border between the North Atlantic and the Eurasian continent.     

The origin of tectonic stress in the lithosphere

The sources of lithospheric stress and their distinctive features are briefly reviewed. It is suggested that there are two main categories of lithospheric stress: renewable stress which persists despite continuing stress relaxation and non-renewable stress which can be dissipated by relief of the initial strain. The two most important types of renewable stress arise from plate boundary forces and from isostatically compensated loads. Non-renewable stress systems include bending stresses, membrane stresses and thermal stresses. An important phenomenon generating large stresses at shallow depth is stress amplification caused by lower lithospheric creep. This applies to renewable stresses but not to the non-renewable type. It is suggested that only renewable stresses contribute significantly to tectonic activity. However, bending and thermal stresses are locally important in subducting lithosphere.