Average velocity in streams is a key variable for the analysis and modelling of hydrological and hydraulic processes underpinning water resources science and practice. The present study evaluates the impact of the sampling duration on the quality of average velocity measurements acquired with contemporary instruments such as Acoustic Doppler Velocimeters (ADV) an Acoustic Doppler Current Profilers (ADCP). The evaluation combines considerations on turbulent flows and principles and configurations of acoustic instruments with practical experience in conducting customized analysis for uncertainty analysis purposes. The study sheds new insights on the spatial and temporal variability of the uncertainty in the measurement of average velocities due to variable sampling durations acting in isolation from other sources of uncertainties. Sampling durations of 90 and 150 s are found sufficient for ADV and ADCP, respectively, to obtain reliable average velocities in a flow affected only by natural turbulence and instrument noise. Larger sampling durations are needed for measurements in most of the natural streams exposed to additional sources of data variability. 相似文献
The spatial distribution of grains in a solidifying igneous rock controls the physical properties of the crystal mush, and
in turn is controlled by the rate of crystal growth and accumulation. A predominant non-spherical habit for igneous minerals
brings into question the use of spherical particles in reference packings used for quantification of spatial distribution.
Furthermore, variations of crystal clustering/ordering with length scale require spatial statistics which take into account
the distribution of particles beyond nearest neighbours. Using random close packings of spherocylinders, we demonstrate the
importance of aspect ratio for the aggregation index (usually known as R) and show that packings of spherical particles have more structure than packings of rods. The spatial distribution functions
demonstrate that the plagioclase grains in the colonnade from the Holyoke basalt are clustered on a length scale of 0.5 mm.
Understanding the controls on grain spatial distribution in igneous rocks will depend on the application of these techniques
to well-understood environments. 相似文献
Using the IRAM interferometer we have observed four carbon stars (U Cam, CIT6, Y CVn, IRC+40540) in the HCN(J=1 0) and CN(N=1 0) lines. Here we present some results for CIT6 and U Cam. 相似文献
Precambrian fluvial systems, lacking the influence of rooted vegetation, probably were characterised by flashy surface runoff, low bank stability, broad channels with abundant bedload, and faster rates of channel migration; consequently, a braided fluvial style is generally accepted. Pre-vegetational braided river systems, active under highly variable palaeoclimatic conditions, may have been more widespread than are modern, ephemeral dry-land braided systems. Aeolian deflation of fine fluvial detritus does not appear to have been prevalent. With the onset of large cratons by the Neoarchaean–Palaeoproterozoic, very large, perennial braided river systems became typical. The c. 2.06–1.88 Ga Waterberg Group, preserved within a Main and a smaller Middelburg basin on the Kaapvaal craton, was deposited largely by alluvial/braided-fluvial and subordinate palaeo-desert environments, within fault-bounded, possibly pull-apart type depositories.
Palaeohydrological data obtained from earlier work in the Middelburg basin (Wilgerivier Formation) are compared to such data derived from the correlated Blouberg Formation, situated along the NE margin of the Main basin. Within the preserved Blouberg depository, palaeohydrological parameters estimated from clast size and cross-bed set thickness data, exhibit rational changes in their values, either in a down-palaeocurrent direction, or from inferred basin margin to palaeo-basin centre. In both the Wilgerivier and Blouberg Formations, calculated palaeoslope values (derived from two separate formulae) plot within the gap separating typical alluvial fan gradients from those which characterise rivers (cf. [Blair, T.C., McPherson, J.G., 1994. Alluvial fans and their natural distinction from rivers based on morphology, hydraulic processes, sedimentary processes, and facies assemblages. J. Sediment. Res. A64, 450–489.]). Although it may be argued that such data support possibly unique fluvial styles within the Precambrian, perhaps related to a combination of major global-scale tectono-thermal and atmospheric–palaeoclimatic events, a simpler explanation of these apparently enigmatic palaeoslope values may be pertinent. Of the two possible palaeohydrological formulae for calculating palaeoslope, one provides results close to typical fluvial gradients; the other formula relies on preserved channel-width data. We suggest that the latter will not be reliable due to problematic preservation of original channel-widths within an active braided fluvial system. We thus find no unequivocal support for a unique fluvial style for the Precambrian, beyond that generally accepted for that period and discussed briefly in the first paragraph. 相似文献
In the Carpathian Flysch, coal is present either as exotics of Carboniferous coal deposits or as autochthonous, thin layers of lustrous coal. This paper present the results of the studies of coal-bearing rocks that are coeval with the enclosing flysch sediments. These coals form lenses up to 0.15 m thick. Their morphology precludes an exotic origin. The main petrographic component is collinite with admixtures of poorly fluorescing telinite. Minor components are: exudatinite, sporinite, fusinite, micrinite and sclerotinite. Mineral matter consists of framboidal pyrite clay minerals and quartz.The random reflectance of telocollinite varies from 0.38% to 0.72%, which corresponds to subbituminous and bituminous ranks. Correlation between chemical analysis, coking properties and relfectance measurements, leads to the conclusion that boundary between subbituminous and bituminous coals should be defined by the following values: C=80wt%, VOLATILES=43wt%; calorific VALUE=32.3 MJ/kg; and Ro=0.56–0.57%.Atypical properties, such as: upper C value (75–80wt%); high volatile matter contents (over 43wt%) and low random reflectance (o about 0.38–0.57%) in subbituminous coals; low C value (about 80–82wt%); low reflectance (0.56–0.72%); and good coking properties, of the bituminous coals are attributed to quick coalification during increasing temperature as a result of tectonic stress. 相似文献
The 1900–1700 Ma Waterberg Group in the main Waterberg fault-bounded basin consists of dominantly coarse siliciclastic red
beds with minor volcanic rocks. The sedimentary rocks were deposited mainly by alluvial fans, fluvial braidplains and transgressive
shallow marine environments, with lesser lacustrine and aeolian settings. Uplifted, largely granitic source areas were located
along the Thabazimbi-Murchison lineament (TML) fault system in the south, and along the Palala shear zone in the northeast.
Palaeoplacer titanomagnetite-ilmenite-zircon heavy mineral deposits, best developed in the Cleremont Formation in the centre
of the basin, reflect initial fluvial reworking and subsequent littoral marine concentration. Coarse alluvial cassiterite
placer deposits are found in the Gatkop area in the southwest of the basin, and appear to have been derived from stanniferous
Bushveld Complex lithologies south of the TML. Hydrothermal zinc and U-Cu mineralisation in the Alma lithologies in the same
area appears to be related to the TML fault system. Small manganese deposits and anomalous tungsten values occur in the south
of the basin, where they are again closely spatially associated with the TML. Copper-barium mineralisation is found associated
with dolerite dykes, and in stratigraphically controlled, inferred syngenetic settings. The most interesting of these apparently
syngenetic occurrences is found within green coloured reduced mudrocks and inferred volcanic rocks, at an unconformity developed
within the overall red bed sequence of the Waterberg Group, adjacent to the TML in the southwest of the basin. The most important
potential mineralisation in the main Waterberg basin thus encompasses shoreline placer Ti and the possibility of substantial
sediment-hosted copper deposits.
Received: 31 May 1996 / Accepted: 17 February 1997 相似文献
A method of detecting lateral resistivity inhomogeneities with a multi-electrode cable for the Schlumberger array is presented. Using such a cable system, two dipole-dipole soundings are gathered in addition to the Schlumberger sounding at each point. Offset differences calculated from the dipole-dipole data give qualitative information about lateral resistivity inhomogeneities. Results from 1D modelling can give quantitative information about the 2D resistivity distribution since the dipole-dipole soundings are made to either side of the Schlumberger sounding point. Examples from two different locations in Norway are shown. At Reinøya, northern Norway, a dipping layer, confirmed by refraction seismic data, was identified. In a sedimentary basin with a contamination plume at Haslemoen, southern Norway, the method has revealed lateral variations in resistivity. In both cases, the Schlumberger soundings could be fitted with a 1D resistivity model. 相似文献
This article presents a research study of complex limestone karst engineering-geological conditions in the municipality Valaská near Banská Bystrica in Slovakia. The aim of the study is to demonstrate the impossibility of spatial identification of cave spaces using surface geophysical methods due to the specific engineering-geological conditions of a thick surface layer of anthropogenic fill containing highly heterogeneous anthropogenic material. Its maximum thickness is 3 m. Another specificific condition of the study area is its location in the built-up area, due to which the applicability of geophysical methods was limited. The article contains methodological recommendations to be used in analogous geological conditions with karst structures topped with anthropogenic fill, which complicates the identification of cave spaces. The recommended solution herein is the identification of the cave system using underground mapping of the karst and its projection onto the surface for which surface geophysical methods have been combined. 相似文献