Uncertainties in Grout Penetrability Measurements; Evaluation and Comparison of Filter pump,Penetrability Meter and Short Slot

To measure grout penetrability in fractured hard rock, various measuring instruments have been developed over the years. Penetrability meter and Filter pump have been designed to use in both the lab and the field. Short slot has been applicable mainly in the lab due to its complexity. The fact, that these instruments have been built based on different assumptions, limitations, and test conditions, makes their results occasionally in contradict. Deficiency in design of the instruments as well as the methods of evaluating grout penetrability is additionally a basis for uncertainty in results. This study is an experimental effort to determine and thoroughly perceive the nature of the most governing uncertainties in grout penetrability measurements. The test apparatus, procedure, and method used to evaluate the grout penetrability in both Penetrability meter and Filter pump were thus modified. The aim was to control the corresponding uncertainties and make their limitations and test conditions as similar as possible with the ones in Short slot. The results suggested that to obtain a more realistic evaluation of the grout penetrability, measurement should be accomplished at both the high and the low pressures with sufficient grout volume using Short slot. Moreover, application of both Filter pump and Penetrability meter is no longer recommended due to the revealed uncertainties.     

Sedimentary facies and sequence stratigraphy of the Asmari Formation at Chaman-Bolbol, Zagros Basin, Iran

The Oligocene–Miocene Asmari Formation of the Zagros Basin is a thick sequence of shallow water carbonate. In the study area, it is subdivided into 14 microfacies that are distinguished on the basis of their depositional textures, petrographic analysis and fauna. Based on the paleoecology and lithology, four distinct depositional settings can be recognized: tidal flat, lagoon, barrier, and open marine. The Asmari Formation represents sedimentation on a carbonate ramp. In the inner ramp, the most abundant lithofacies are medium grained wackestone–packstone with imperforated foraminifera. The middle ramp is represented by packstone–grainstone to floatstone with a diverse assemblage of larger foraminifera with perforate wall, red algae, bryozoa, and echinoids. The outer ramp is dominated by argillaceous wackestone characterized by planktonic foraminifera and large and flat nummulitidae and lepidocyclinidae. Three third-order depositional sequences are recognized from deepening and shallowing trends in the depositional facies, changes in cycle stacking patterns, and sequence boundary features.     

Geochemical constraints on the genesis of the volcanic rocks in the southeast of Isfahan area, Iran

Late Miocene–Pliocene to Quaternary calc-alkaline lava flows and domes are exposed in southeast of Isfahan in the Urumieh Dokhtar magmatic belt in the Central Iran structural zone. These volcanic rocks have compositions ranging from basaltic andesites, andesites to dacites. Geochemical studies show these rocks are a medium to high K calc-alkaline suite and meta-aluminous. Major element variations are typical for calc-alkaline rocks. The volcanic rocks have SiO₂ contents ranging between 53.8% and 65.3%. Harker diagrams clearly show that the dacitic rocks did not form from the basaltic andesites by normal differentiation processes. They show large ion lithophile elements- and light rare earth elements (LREE)-enriched normalized multielement patterns and negative Nb, Ti, Ta, and P. Condrite-normalized REE patterns display a steep decrease from LREE to light rare earth elements without any Eu anomaly. These characteristics are consistent with ratios obtained from subduction-related volcanic rocks and in collision setting. The melting of a heterogeneous source is possible mechanism for their magma genesis, which was enriched in incompatible elements situated at the upper continental lithospheric mantle or lower crust. The geochemical characteristics of these volcanic rocks suggested that these volcanic rocks evolved by contamination of a parental magma derived from metasomatized upper lithospheric mantle and crustal melts.     

Investigation of SVM and Level Set Interactive Methods for Road Extraction from Google Earth Images

Currently, methods of extracting spatial information from satellite images are mainly based on visual interpretations and drawing the consequences by human factor, which is both costly and time consuming. A large volume of data collected by satellite sensors, and significant improvement in spatial and spectral resolution of these images require the development of new methods for optimal use of these data in order to produce rapid economic and updating road maps. In this study, a new automatic method is proposed for road extraction by integrating the SVM and Level Set methods. The estimated probability of classification by SVM is used as input in Level Set Method. The average of completeness, correctness, and quality was 84.19, 88.69 and 76.06% respectively indicate high performance of proposed method for road extraction from Google Earth images.     

Application of integrated geoelectrical methods in Khenadarreh (Arak,Iran) graphite deposit exploration

This paper is devoted to application of SP, resistivity and mise-a-la-masse method in Khenadarreh (Arak, Iran) graphite deposit exploration. Mise-a-la-masse method is one of the main geophysical exploration methods used to investigate conductive bodies with outcrops on the surface or in exploratory pits. By integrating mise-a-la-masse results with other geoelectrical methods, such as self-potential and resistivity surveys, useful results can be acquired. Powerful survey design, data processing and interpretation methods can make geoelectrical surveying results more reliable. Here, we applied integrated geoelectrical methods to explore the Khenadarreh-bala graphite deposit in the Sarband region of the Markazi province, Iran. We present a new and simple method for processing and interpreting mise-a-la-masse data, which corrects for the effect of distance from the current electrode in the conductive body. After correction, the residual potential values corresponded with the SP results and the apparent resistivity pseudosections. The geophysical results were confirmed by drill holes in the study area.     

Prediction of pile settlement using artificial neural networks based on standard penetration test data

In recent years artificial neural networks (ANNs) have been applied to many geotechnical engineering problems with some degree of success. With respect to the design of pile foundations, accurate prediction of pile settlement is necessary to ensure appropriate structural and serviceability performance. In this paper, an ANN model is developed for predicting pile settlement based on standard penetration test (SPT) data. Approximately 1000 data sets, obtained from the published literature, are used to develop the ANN model. In addition, the paper discusses the choice of input and internal network parameters which were examined to obtain the optimum model. Finally, the paper compares the predictions obtained by the ANN with those given by a number of traditional methods. It is demonstrated that the ANN model outperforms the traditional methods and provides accurate pile settlement predictions.     

Delineation of groundwater potential zones using remote sensing and GIS-based data-driven models

The rapid increase in human population has increased the groundwater resources demand for drinking, agricultural and industrial purposes. The main purpose of this study is to produce groundwater potential map (GPM) using weights-of-evidence (WOE) and evidential belief function (EBF) models based on geographic information system in the Azna Plain, Lorestan Province, Iran. A total number of 370 groundwater wells with discharge more than 10 m³s^?1were considered and out of them, 256 (70%) were randomly selected for training purpose, while the remaining114 (30%) were used for validating the model. In next step, the effective factors on the groundwater potential such as altitude, slope aspect, slope angle, curvature, distance from rivers, drainage density, topographic wetness index, fault distance, fault density, lithology and land use were derived from the spatial geodatabases. Subsequently, the GPM was produced using WOE and EBF models. Finally, the validation of the GPMs was carried out using areas under the ROC curve (AUC). Results showed that the GPM prepared using WOE model has the success rate of 73.62%. Similarly, the AUC plot showed 76.21% prediction accuracy for the EBF model which means both the models performed fairly good predication accuracy. The GPMs are useful sources for planners and engineers in water resource management, land use planning and hazard mitigation purpose.     

Detrital zircon provenance analysis in the Zagros Orogen,SW Iran: implications for the amalgamation history of the Neo-Tethys

International Journal of Earth Sciences - The Zagros Orogen developed as a result of Arabia–Eurasia collision. New in situ detrital zircon U–Pb and Hf isotopic analyses from a Cenozoic...     

Relaxation of protostellar accretion shocks using the smoothed particle hydrodynamics

It is believed that protostellar accretion disks are formed from nearly ballistic infall of molecular matter in rotating core collapse. Collisions of this infalling matter leads to formation of strong supersonic shocks, which if they cool rapidly, result in accumulation of that material in a thin structure in the equatorial plane. Here, we investigate the relaxation time of the protostellar accretion post‐shock gas using the smoothed particle hydrodynamics (SPH). For this purpose, a one‐dimensional head‐on collision of two molecular sheets is considered, and the time evolution of the temperature and density of the post‐shock region simulated. The results show that in strong supersonic shocks, the temperature of the post‐shock gas quickly increases proportional to square of the Mach number, and then gradually decreases according to the cooling processes. Using a suitable cooling function shows that in appropriate time‐scale, the center of the collision, which is at the equatorial plane of the core, is converted to a thin dense molecular disk, together with atomic and ionized gases around it. This structure for accretion disks may justify the suitable conditions for grain growth and formation of proto‐planetary entities (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)