Evolution of a transfer-related basin: the Ardea basin (Latium, central Italy)

During the Messinian—Pleistocene, the Peninsular Tyrrhenian margin underwent a NE—SW orientated stretching regime, with the formation of a NW—SE normal fault system and basins which are linked by NE—SW transfer fault zones. These fault zones border narrow and deep asymmetric basins. This paper uses geological and geophysical analysis (structural and stratigraphical data, seismic lines and anisotropy of magnetic susceptibility (AMS) data) to look at the evolution of one of these transfer-related basins, located south of Rome (Ardea basin). Comparison with other similar features indicates that the common characteristics of these transfer structures are: (i) the slip vector along the transfer fault is mostly dip-slip, which means that the local extensional direction is orthogonal to the regional extensional direction; (ii) development of a narrow and deep half-graben basin.     

西班牙南部Subbetic中带Río Fardes剖面Turonian-Coniacian大洋红层

Río Fardes剖面位于西班牙南部Granada东北,构造上属于深水环境的Subbetic中带。该剖面主要由白垩纪Fardes组第Ⅱ段和第Ⅲ段(半)远洋沉积构成,并出现浊流沉积和混杂沉积。本次研究在Fardes组浊流层序内首次发现两段红色沉积。钙质超微化石表明红层的时间从Turonian早期(UC7 带)到Coniacian中期—晚期界线(UC10/?UC11带)。红层由mm级红色泥岩夹灰色、杂色、偶尔黑色泥岩和钙质泥岩组成。沉积学研究表明新发现的Turonian Coniacian远洋红色泥岩沉积形成于CCD面之下深水盆地环境,浊流和碎屑流沉积强烈地影响着(半)远洋环境的背景泥岩相,并成为红色沉积结束的原因。     

Sequence stratigraphy in the context of rapid regional uplift and high‐amplitude glacio‐eustatic changes: the Pleistocene Cutro Terrace (Calabria,southern Italy)

The Cutro Terrace is a mixed marine to continental terrace, where deposits up to 15 m thick discontinuously crop out in an area extending for ca 360 km² near Crotone (southern Italy). The terrace represents the oldest and highest terrace of the Crotone area, and it has been ascribed to marine isotope stage 7 (ca 200 kyr bp ). Detailed facies and sequence‐stratigraphic analyses of the terrace deposits allow the recognition of a suite of depositional environments ranging from middle shelf to fluvial, and of two stacked transgressive–regressive cycles (Cutro 1 and Cutro 2) bounded by ravinement surfaces and by surfaces of sub‐aerial exposure. In particular, carbonate sedimentation, consisting of algal build‐ups and biocalcarenites, characterizes the Cutro 1 cycle in the southern sector of the terrace, and passes into shoreface and foreshore sandstones and calcarenites towards the north‐west. The Cutro 2 cycle is mostly siliciclastic and consists of shoreface, lagoon‐estuarine, fluvial channel fill, floodplain and lacustrine deposits. The Cutro 1 cycle is characterized by very thin transgressive marine strata, represented by lags and shell beds upon a ravinement surface, and thicker regressive deposits. Moreover, the cycle appears foreshortened basinwards, which suggests that the accumulation of its distal and upper part occurred during forced regressive conditions. The Cutro 2 cycle displays a marked aggradational component of transgressive to highstand paralic and continental deposits, in places strongly influenced by local physiography, whereas forced regressive sediments are absent and probably accumulated further basinwards. The maximum flooding shoreline of the second cycle is translated ca 15 km basinward with respect to that of the first cycle, and this reflects a long‐term regressive trend mostly driven by regional uplift. The stratigraphic architecture of the Cutro Terrace deposits is the result of the interplay between regional uplift and high amplitude, Late Quaternary glacio‐eustatic changes. In particular, rapid transgressions, linked to glacio‐eustatic rises that outpaced regional uplift, favoured the accumulation of thin transgressive marine strata at the base of the two cycles. In contrast, the combined effect of glacio‐eustatic falls and regional uplift led to high‐magnitude forced regressions. The superposition of the two cycles was favoured by a relatively flat topography, which allowed relatively complete preservation of stratal geometries that record large shoreline displacements during transgression and regression. The absence of a palaeo‐coastal cliff at the inner margin of the terrace supports this interpretation. The Cutro Terrace provides a case study of sequence architecture developed in uplifting settings and controlled by high‐amplitude glacio‐eustatic changes. This case study also demonstrates how the interplay of relative sea‐level change, sediment supply and physiography may determine either the superposition of cycles forming a single terrace or the formation of a staircase of terraces each recording an individual eustatic pulse.     

Fault array evolution in extensional basins: insights from statistical analysis of gravel deposits in the Cecina River (Tuscany,Italy)

Two statistical analyses of gravel clasts from the Lower Pleistocene deposits in the Lower Cecina Valley (Tuscany, Italy) have been combined to unravel changes in the palaeo‐drainage system. Data from 16 outcrops were collected and 6400 clasts described. Facies analysis, micro‐palaeontology and macro‐palaeontology and petrographic characteristics of the gravel deposits have highlighted the presence of three allostratigraphic units. Clast lithology is the main discriminator among these units. Cluster and principal component analyses of the 6400 clasts have improved understanding of the stratigraphy of the Lower Pleistocene deposits and constrain the re‐routing of the lower palaeo‐Cecina River from a supposedly south‐east to north‐west direction to the present east to west direction. Short rivers feeding small fan deltas represented by the oldest allostratigraphic units were abandoned in the Lower Pleistocene, when the re‐routing of the Cecina River caused the capture of these streams. This evolution suggests a change in the tectonic regime of the area. The fan deltas developed on the hanging wall of normal faults sub‐parallel to the coast; a change to a transtensile tectonic regime caused the deviation of the main river channel toward the present coast and the formation of a pull‐apart basin, which is now exploited by the Cecina River. This study illustrates the value of lithological analyses of gravel deposits for understanding the tectonic evolution of an area.     

Facies associations and evolution of pelagic carbonate platform/basin systems: examples from the Italian Jurassic

ABSTRACT During the structural and sedimentological evolution of rifted continental margins in carbonate dominated settings, a characteristic stage is commonly reached when pelagic carbonate sedimentation occurs in association with complex fault block systems. An integrated study of the ammonite biostratigraphy and sedimentology of Jurassic pelagic rocks in the Umbria-Marche Apennines (central Italy) and in the Sila Mountains (north-east Calabria, southern Italy) has revealed three distinctive facies associations which can be related to specific structural and depositional settings. The condensed pelagic facies association is the constituent of condensed, usually discontinuous sequences, with numerous hiatal surfaces. The normal and resedimented pelagic facies association is typical of thicker sequences, comprising gravity flow and rockfall deposits. The composite pelagic facies association is one in which rockfall deposits are found associated with condensed sequences containing minor or no gravity flow deposits. Palaeotopographical highs are dominated by the condensed pelagic facies association and constitute the pelagic carbonate platform (PCP). Structurally, the PCP can be coincident with the top of a horst (or ‘central high’) block or the crestal area of a tilted block. In the latter case, the sediment surface of the PCP slopes gently (maximum of 1–3°) in this, the shallowest area of a pelagic carbonate ramp. PCPs can have erosional, bypass (rare) and depositional margins. Stepped margins also exist as subparallel rows of erosional and bypass margins. Trends from erosional to depositional margins are usually seen as a response to basin filling and burial of submarine tectonic escarpments by pelagic deposits in late synrift or early post-rift times. This is apparent from ‘progradation’ of PCP facies deposits beyond the structural boundaries of the PCP. Palaeoenvironmental analysis in pelagic carbonate platform deposits of the Umbria-Marche Apennines suggests that drowning of ancestral peritidal carbonate platforms in Pliensbachian time was followed first by a moderate deepening and then by shallowing in the Tithonian.     

Relationships between high‐magnitude relative sea‐level changes and filling of a coarse‐grained submarine canyon (Pleistocene,Ionian Calabria,Southern Italy)

A middle Pleistocene coarse‐grained canyon fill succession (the Serra Mulara Formation) crops out in the northern sector of the Crotone Basin, a forearc basin located on the Ionian side of the Calabrian Arc and active from the Serravallian to middle Pleistocene. This succession is an example of coarse‐grained submarine canyon fill, which consists of a north‐west to south‐east elongated body (4·25 km long and up to 1·5 km wide) laterally confined by a deep‐water clayey and silty succession and located behind the modern Neto delta (north of Crotone). The thickness of the unit reaches 178 m. The lower part of the canyon fill is dominated by gravelly to sandy density‐flow deposits containing abundant bivalve and gastropod fragments, passing upward into a succession composed of metre‐scale to decimetre‐scale density‐flow deposits forming sandstone–mudstone couplets. Sandstone deposits are mostly structureless and planar‐laminated, whereas the clayey layers record hemipelagic deposition during quieter phases. This succession is overlain by another composed of thicker structureless sandstones alternating with layers of interlaminated mudstones and sandstones, which contain leaf remnants and fresh water ostracods, and are linked directly to river floods. The canyon fill is overlain by gravelly to sandy continental deposits recording a later stage of emergence. Facies analysis, together with micropalaeontological data from the hemipelagic units, suggests that the studied canyon fill records, firstly, a progressive gravel material cut‐off during deposition due to an overall relative sea‐level rise, leading to a progressive increase in the entrapment of sediment in fluvial to shallow‐marine systems, and secondly, a generalized relative sea‐level lowering. This trend probably reflects high‐magnitude glacio‐eustatic changes combined with the regional uplift of the region, ultimately leading to emergence.     

The response of two Tethyan carbonate platforms to the early Toarcian (Jurassic) oceanic anoxic event: environmental change and differential subsidence

Chemostratigraphic analyses (⁸⁷Sr/⁸⁶Sr, δ¹³C_carb) of limestones from two Jurassic platform‐carbonate sequences in Italy (Trento and Campania–Lucania Platforms) illustrate previously established trends found in pelagic sediments and skeletal carbonates from biostratigraphically well‐calibrated sections elsewhere in Europe. Chemostratigraphic correlations between the platform‐carbonate successions and appropriate intervals from well‐dated reference sections allow the application of high‐resolution stratigraphy to these shallow‐water peritidal carbonates and, furthermore, elucidate the facies response to the Early Toarcian Oceanic Anoxic Event (OAE). Lower Jurassic (Toarcian) levels of the western Trento Platform (Southern Alps, Northern Italy) contain spiculitic cherts that appear where rising carbon‐isotope values characterize the onset of the OAE: a palaeoceanographic phenomenon interpreted as driven by increased nutrient levels in near‐surface waters. There is a facies change to more clay‐rich facies at the level of the abrupt negative carbon‐isotope excursion, also characteristic of the OAE, higher in the section. The Campania–Lucania Platform (Southern Apennines, Southern Italy) records a change to more clay‐rich facies where carbon‐isotope values begin to rise at the beginning of the OAE but the negative excursion, higher in the section, occurs within oolitic facies. Although, in both examples, the Early Toarcian OAE can be recognized by a change to more clay‐rich lithologies, this facies development is diachronous and in neither case did the platform drown. Although the Trento Platform, in the south‐west sector studied here, was adversely affected by the OAE, it did not drown definitively until Late Aalenian time; the Campania–Lucania Platform persisted throughout the Jurassic and Cretaceous. Differential subsidence rates, which can be calculated using comparative chemostratigraphy, are identified as a crucial factor in the divergent behaviour of these two carbonate platforms: relatively fast in the case of the Trento Platform; relatively slow in the case of the Campania–Lucania Platform. It is proposed that where water depths remained as shallow as a few metres during the OAE (Campania–Lucania Platform), dissolved oxygen levels remained high, nutrient levels relatively low and conditions for carbonate secretion and precipitation remained relatively favourable, whereas more poorly ventilated and/or more nutrient‐rich waters (Trento Platform) adversely influenced platform growth where depths were in the tens of metres range. The stage was thus set for drowning on the more rapidly subsiding western margin of the Trento Plateau and a pulse of oolite deposition post‐dating the OAE was insufficient to revitalize the carbonate factory.     

Decision makers' perspectives on European geographic information policy issues

The proposals for a European policy framework for Geographic Information (GI) recently put forward by Directorate General XIII raise three sets of issues about measures required to facilitate the dissemination of GI in the European Union: (1)'hot topics' such as privacy and the legal protection of databases that apply to information generally; (2) GI issues such as reference data and metadata services that may require action by the European Commission; and (3) perceived barriers to the development of a European GI market. This paper examines the views of 20 experts responsible for the provision and management of GI in key organizations throughout Europe. A Delphi-style strategy was used to identify the relative importance of the issues raised by the proposals and to ascertain the level of agreement as to the importance of these issues between the experts. The results show that issues relating to copyright, the protection of intellectual property rights, data quality, and data access policies were ranked highly by most of the respondents. A lack of awareness, education, and training (as opposed to the lack of public domain data and metadata services) were viewed as the main barriers to the deveiopment of the GI market in Europe.     

Petrology and Geochemistry of West Philippine Basin Basalts and Early Palau-Kyushu Arc Volcanic Clasts from ODP Leg 195, Site 1201D: Implications for the Early History of the Izu-Bonin-Mariana Arc

Site 1201D of Ocean Drilling Program Leg 195 recovered basalticand volcaniclastic units from the West Philippine Basin thatdocument the earliest history of the Izu–Bonin–Marianaconvergent margin. The stratigraphic section recovered at Site1201D includes 90 m of pillow basalts, representing the WestPhilippine Basin basement, overlain by 459 m of volcaniclasticturbidites that formed from detritus shed from the Eocene–Oligoceneproto-Izu–Bonin–Mariana island arc. Basement basaltsare normal mid-ocean ridge basalt (N-MORB), based on their abundancesof immobile trace elements, although fluid-mobile elements areenriched, similar to back-arc basin basalts (BABB). Sr, Nd,Pb and Hf isotopic compositions of the basement basalts aresimilar to those of basalts from other West Philippine Basinlocations, and show an overall Indian Ocean MORB signature,marked by high ²⁰⁸Pb/²⁰⁴Pb for a given ²⁰⁶Pb/²⁰⁴Pb and high¹⁷⁶Hf/¹⁷⁷Hf for a given ¹⁴³Nd/¹⁴⁴Nd. Trace element and isotopicdifferences between the basement and overlying arc-derived volcaniclasticsare best explained by the addition of subducted sediment orsediment melt, together with hydrous fluids from subducted oceaniccrust, into the mantle source of the arc lavas. In contrastto tectonic models suggesting that a mantle hotspot was a sourceof heat for the early Izu–Bonin–Mariana arc magmatism,the geochemical data do not support an enriched, ocean islandbasalt (OIB)-like source for either the basement basalts orthe arc volcanic section. KEY WORDS: back-arc basalts; Izu–Bonin–Marianas; Philippine Sea; subduction initiation; Ocean Drilling Program Leg 195     

闪电河流域农牧交错带微波遥感土壤水分产品评价

空间网格分辨率为9 km的SMAP (Soil Moisture Active and Passive)、0.1D (Degree)的ASCAT (The Advanced Scatterometer)、 25 km的FY-3B以及25 km ESA-CCI (European Space Agency-Climate Change Initiative)是较为广泛应用的卫星遥感土壤水分产品,对数据质量的评价是进一步应用于旱情监测、蒸散发估算等研究的前提。本研究基于2018年9月在闪电河流域内蒙古农牧交错带区域开展的碳、水循环与能量平衡遥感综合试验,采用近似同步的两种尺度观测数据即点尺度地面实测土壤水分数据以及面尺度(1 km×1 km)机载土壤水分数据,利用RMSE (Root Mean Square Error), MAE (Mean Absolute Error),R (Correlation Coefficient),Bias以及ubRMSE (unbiased Root Mean Square Error)等评价指标分别对SMAP, ASCAT, FY-3B, ESA-CCI土壤水分卫星遥感产品进行了评价。本研究利用机载土壤水分数据作为桥梁,实现了从点尺度地面实测土壤水分数据、至面尺度(1 km×1 km)机载土壤水分数据、再至粗格网面尺度(9 km×9 km、0.1 D×0.1 D、25 km×25 km)卫星遥感土壤水分产品的对比分析过程。利用地面观测值对机载观测土壤水分开展评价分析,发现在裸土区域,机载土壤水分数据与地面实测数据较为一致,RMSE, MAE, Bias, ubRMSE以及R值分别为0.033 cm~3/cm~3,0.030 cm~3/cm~3,-0.004 cm~3/cm~3, 0.033 cm~3/cm~3, 0.474。对卫星土壤水分产品的评价结果显示,SMAP的9 km土壤水分卫星产品与地面观测更为一致,其RMSE,MAE,Bias,ub RMSE以及R值分别为0.037 cm~3/cm~3,0.032 cm~3/cm~3,-0.008 cm~3/cm~3, 0.036 cm~3/cm~3, 0.507。SMAP, ASCAT, FY-3B以及ESA-CCI与机载土壤水分数据有更高的相关性,R值分别为0.735, 0.558, 0.558, 0.575。综上,闪电河流域实验区内的4种卫星遥感土壤水分产品中,SMAP产品与地面土壤水分、机载土壤水分数据均较为一致,其次是FY-3B与ESA-CCI。