Tensile stresses around boreholes due to transient fluid flow

We present solutions for the effective stress induced by gas flow through a porous solid into a borehole resulting from sudden pressure reduction. Tensile effective stress that exceeds the strength of the solid will lead to borehole failure. This has applications to the intentional creation of cavities, relevant to the efficient recovery of coalbed methane, and the avoidance of borehole stability problems in conventional gas production.     

Dynamics of the long-period tides

The long-period tides are a tool for understanding oceanic motions at low frequencies and large scales. Here we review observations and theory of the fortnightly, monthly and pole tide constitutents. Observations have been plagued by low signal-to-noise ratios and theory by the complex lateral geometry and great sensitivity to bottom slopes. A new spectral element model is used to compute the oceanic response to tidal forcing at 2-week and monthly periods. The general response is that of a heavily damped (Q ≈ 5) system with both the energy input from the moon and the dissipation strongly localized in space. The high dissipation result is probably generally applicable to all low frequency barotropic oceanic motions. Over much of the ocean, the response has both the character of a large-scale and a superposed Rossby wave-like character, thus vindicating two apparently conflicting earlier interpretations. To the extent that free waves are excited they are consistent with their being dominated by Rossby and topographic Rossby wave components, although gravity modes are also necessarily excited to some degree. In general, a modal representation is not very helpful. The most active regions are the Southern Ocean and the western and northern North Atlantic. These results are stable to changes in geometry, topography, and tide period. On a global average basis, the dynamical response of Mm is closer to equilibrium than is Mf.     

Learning to trade ethically: Knowledgeable capitalism, retailers and contested commodity chains

This paper explores what happens when corporations engage explicitly in practices of organisational learning not only to become better capitalists by generating ever more innovative ways of maintaining profitability, improving competitiveness and maximising shareholder value, but also to become more responsible corporate citizens in their business practices. In particular, I evaluate the ways in which UK food and clothing retailers are learning to develop their ethical trading programmes in response to political calls for more responsible trading. Thrift’s [Thrift, N., 2005. Knowing Capitalism. Sage, London] notion of ‘knowledgeable, or soft, capitalism’ is adopted to understand the creative and experimental ways in which retailers and their mentors (ethical consultancies, social auditors and multi-stakeholder organisations) are learning to trade ethically. Two specific examples of formal learning spaces experienced by UK food and clothing retailers are examined: (i) training courses on social auditing and (ii) corporate awareness-raising courses on ethical trade. These courses are shown to encompass various participative and affective practices of learning. And while particular limits to the success of these courses are argued to exist, ethical learning practices discussed in this paper are nonetheless suggested to play a role in the making of new, albeit moderate, forms of responsible capitalism.     

Biostratigraphic and detrital zircon age constraints on the basement of the Himalayan Foreland Basin: Implications for a Proterozoic link to the Lesser Himalaya and cratonic India

The Himalayan Foreland Basin in the Ganga Valley is key to assessing the pre‐collision relationship between cratonic India and the Himalaya – the world's largest mountain chain. The subsurface Ganga Supergroup, representing the sedimentary basement of the Ganga Valley, has been interpreted as a northern extension of the Proterozoic Vindhyan Supergroup in cratonic India. This interpretation is contentious because the depositional age of the Ganga Supergroup is not resolved: whereas the lower Ganga Supergroup is widely regarded as Proterozoic, the upper Ganga Supergroup has been variously inferred to include Neoproterozoic, lower Palaeozoic, or Cretaceous strata. Here, we integrate biostratigraphic and detrital zircon data from drill cores to show that the entire Ganga Supergroup is likely Proterozoic and can be correlated with Proterozoic successions on the northern Indian craton and in the Lesser Himalaya. This helps redefine the first‐order stratigraphic architecture and indicates broad depositional continuity along the northern Indian margin during the Proterozoic.     

K-Ar ages of basic rocks in the Patia Valley, southwest Colombia

The Patia Valley situated between the Western and Central Cordilleras of the southwest Colombian Andes contains two areas in which Mesozoic basic and ultrabasic rocks crop out in abundance. Late Cretaceous Diabase Group pillow basalts which make up much of the Western Cordillera are at least 81 ± 5 Ma in the E1 Tambo-E1 Peñol area. 105-97 Ma hornblende and whole-rock dates from the ophiolitic Los Azules complex indicate an Albian age of formation, although many dates are lower (65-62 Ma) owing the low-grade ocean-floor metamorphism. The metamorphic age distribution here supports an end of Cretaceous emplacement for the complex rather than the Early-Mid Cretaceous emplacement suggested for North Colombian ophiolites similarly aligned along the Romeral fault system. Tertiary dacites intruding the Low Azules complex are 36-15 Ma.     

Tidally incised valleys on tropical carbonate shelves: An example from the northern Great Barrier Reef, Australia

The formation of incised valleys on continental shelves is generally attributed to fluvial erosion under low sea level conditions. However, there are exceptions. A multibeam sonar survey at the northern end of Australia's Great Barrier Reef, adjacent to the southern edge of the Gulf of Papua, mapped a shelf valley system up to 220 m deep that extends for more than 90 km across the continental shelf. This is the deepest shelf valley yet found in the Great Barrier Reef and is well below the maximum depth of fluvial incision that could have occurred under a − 120 m, eustatic sea level low-stand, as what occurred on this margin during the last ice age. These valleys appear to have formed by a combination of reef growth and tidal current scour, probably in relation to a sea level at around 30–50 m below its present position.

Tidally incised depressions in the valley floor exhibit closed bathymetric contours at both ends. Valley floor sediments are mainly calcareous muddy, gravelly sand on the middle shelf, giving way to well-sorted, gravely sand containing a large relict fraction on the outer shelf. The valley extends between broad platform reefs and framework coral growth, which accumulated through the late Quaternary, coincides with tidal current scour to produce steep-sided (locally vertical) valley walls. The deepest segments of the valley were probably the sites of lakes during the last ice age, when Torres Strait formed an emergent land-bridge between Australia and Papua New Guinea. Numerical modeling predicts that the strongest tidal currents occur over the deepest, outer-shelf segment of the valley when sea level is about 40–50 m below its present position. These results are consistent with a Pleistocene age and relict origin of the valley.

Based on these observations, we propose a new conceptual model for the formation of tidally incised shelf valleys. Tidal erosion on meso- to macro-tidal, rimmed carbonate shelves is enhanced during sea level rise and fall when a tidal, hydraulic pressure gradient is established between the shelf-lagoon and the adjacent ocean basin. Tidal flows attain a maximum, and channel incision is greatest, when a large hydraulic pressure gradient coincides with small channel cross sections. Our tidal-incision model may explain the observation of other workers, that sediment is exported from the Great Barrier Reef shelf to the adjacent ocean basins during intermediate (rather than last glacial maximum) low-stand, sea level positions. The model may apply to other rimmed shelves, both modern and ancient.     

A submillimetre survey of the star formation history of radio galaxies

We present the results of the first major systematic submillimetre survey of radio galaxies spanning the redshift range 1< z <5. The primary aim of this work is to elucidate the star formation history of this sub class of elliptical galaxies by tracing the cosmological evolution of dust mass. Using SCUBA on the JCMT, we have obtained 850-μm photometry of 47 radio galaxies to a consistent rms depth of 1 mJy, and have detected dust emission in 14 cases. The radio galaxy targets have been selected from a series of low-frequency radio surveys of increasing depth (3CRR, 6CE, etc.), in order to allow us to separate the effects of increasing redshift and increasing radio power on submillimetre luminosity. Although the dynamic range of our study is inevitably small, we find clear evidence that the typical submillimetre luminosity (and hence dust mass) of a powerful radio galaxy is a strongly increasing function of redshift; the detection rate rises from ≃15 per cent at z <2.5 to ≳75 per cent at z >2.5, and the average submillimetre luminosity rises at a rate ∝(1+ z )³ out to z ≃4. Moreover, our extensive sample allows us to argue that this behaviour is not driven by underlying correlations with other radio galaxy properties such as radio power, radio spectral index, or radio source size/age. Although radio selection may introduce other more subtle biases, the redshift distribution of our detected objects is in fact consistent with the most recent estimates of the redshift distribution of comparably bright submillimetre sources discovered in blank field surveys. The evolution of submillimetre luminosity found here for radio galaxies may thus be representative of massive ellipticals in general.     

A new approach to the calculation of the cratering rate of the Earth over the last 125 ± 20 Myr

The recent cratering record of the surface of the Earth is re-examined using a new technique that concentrates on estimating the mean areas occupied by individual craters, together with the gradients of linear plots of crater numbers versus crater ages. This analysis indicates that the lower limit of the rate at which craters have been produced over the last 125±20 Myr is, for example, (12.0±0.7)×10⁻¹⁵ km⁻² yr⁻¹ for D 2.4 km craters, (9.5±0.6)×10⁻¹⁵ km⁻² yr⁻¹ for D 5.0 km craters, (6.5±0.5)×10⁻¹⁵ km⁻² yr⁻¹ for D 12 km craters, and (3.0±0.3)×10⁻¹⁵ km⁻² yr⁻¹ for D 22 km craters. These figures indicate that previous researchers have considerably overestimated the rate at which small (2.4< D <20 km) craters are being produced. It is also found that the relationship between crater production rate and crater diameter is not a simple power law in the 2.4< D <40 km diameter range. On the most stable areas of the Earth's continents, and over the last 125±20 Myr it seems that the rate at which craters are eroded below the detection limit does not depend on crater diameter throughout the above size range.     

The D-CIXS X-ray mapping spectrometer on SMART-1

The D-CIXS Compact X-ray Spectrometer will provide high quality spectroscopic mapping of the Moon, the primary science target of the ESA SMART-1 mission. D-CIXS consists of a high throughput spectrometer, which will perform spatially localised X-ray fluorescence spectroscopy. It will also carry a solar monitor, to provide the direct calibration needed to produce a global map of absolute lunar elemental abundances, the first time this has been done. Thus it will achieve ground breaking science within a resource envelope far smaller than previously thought possible for this type of instrument, by exploiting two new technologies, swept charge devices and micro-structure collimators. The new technology does not require cold running, with its associated overheads to the spacecraft. At the same time it will demonstrate a radically novel approach to building a type of instrument essential for the BepiColombo mission and potential future planetary science targets.