Limitations of the Korean conventional fisheries management regime and expanding Korean TAC system toward output control systems

In this paper, we focus on the status and trends of the current Korean fisheries management regime. Specifically, this paper briefly introduces the Korean conventional fisheries management regime (KCFMR) and discusses its problems and limitations. In describing policy evolution, this paper finds reasons why the Korean government has chosen a TAC system, an output control approach, besides input control approaches in force for almost a century. This paper also describes the evolution of the Korean TAC system, which is carrying out a pivotal role in Korean fisheries development, and analyzes problems of the Korean TAC system. Finally, this paper gives a perspective on expanding the Korean TAC system toward Output Control Systems (OCSs) such as Individual Quotas (IQs), Individual Vessel Quotas (IVQs), Individual Transferable Traps (ITTs), Community Quotas (CQs), and Individual Transferable Quotas (ITQs).     

Graded-Density Reservoirs for Accessing High Stress Low Temperature Material States

In recently developed laser-driven shockless compression experiments an ablatively driven shock in a primary target is transformed into a ramp compression wave in a secondary target via unloading followed by stagnation across an intermediate vacuum gap. Current limitations on the achievable peak longitudinal stresses are limited by the ability of shaping the temporal profile of the ramp compression pulse. We report on new techniques using graded density reservoirs for shaping the loading profile and extending these techniques to high peak pressures.     

Age and Growth of Southern Bluefin Tuna,Thunnus maccoyii,Based on Otolith Microstructure

Ocean Science Journal - Age and growth of southern bluefin tuna (SBT, Thunnus maccoyii) were estimated based on otoliths collected by Korean tuna longline vessels in the Atlantic and Indian Oceans...     

Hydrometallurgical processing and recovery of molybdenum trioxide from spent catalyst

Hydrometallurgical processing of spent hydrodesulphurisation (HDS) catalyst for the recovery of molybdenum using sodium carbonate and hydrogen peroxide mixtures was investigated. The results indicated that the recovery of molybdenum was largely dependent on the concentrations of Na₂CO₃ and H₂O₂ in the reaction medium, which controls the acidity of the leach liquor and carry over of impurities such as Al, Ni, P, Si and V. Leaching process was exothermic and leaching efficiency of molybdenum decreased with increasing solid to liquid ratio. Large scale leaching of spent catalyst, under optimum conditions: 20% pulp density, 85 g/L Na₂CO₃, 10 vol.% H₂O₂ and 1 h reaction, resulted a leaching efficiency of 84% Mo. The obtained leach liquor contained (g/L): Mo — 22.0, Ni — 0.015 and Al — 0.82, P — 1.1, Si — 0.094 and minor quantities of V — 8 mg/L, As and Co — < 1 mg/L. Recovery of Mo from leach solution as MoO₃ of 97.30% purity was achieved by ammonium molybdate precipitation method.     

A nearly analytic symplectic partitioned Runge–Kutta method based on a locally one-dimensional technique for solving two-dimensional acoustic wave equations

In this paper, we develop a new nearly analytic symplectic partitioned Runge–Kutta method based on locally one-dimensional technique for numerically solving two-dimensional acoustic wave equations. We first split two-dimensional acoustic wave equation into the local one-dimensional equations and transform each of the split equations into a Hamiltonian system. Then, we use both a nearly analytic discrete operator and a central difference operator to approximate the high-order spatial differential operators, which implies the symmetry of the discretized spatial differential operators, and we employ the partitioned second-order symplectic Runge–Kutta method to numerically solve the resulted semi-discrete Hamiltonian ordinary differential equations, which results in fully discretized scheme is symplectic unlike conventional nearly analytic symplectic partitioned Runge–Kutta methods. Theoretical analyses show that the nearly analytic symplectic partitioned Runge–Kutta method based on locally one-dimensional technique exhibits great higher stability limits and less numerical dispersion than the nearly analytic symplectic partitioned Runge–Kutta method. Numerical experiments are conducted to verify advantages of the nearly analytic symplectic partitioned Runge–Kutta method based on locally one-dimensional technique, such as their computational efficiency, stability, numerical dispersion and long-term calculation capability.     

Wave velocities and attenuation of shaley sandstones as a function of pore pressure and partial saturation

We obtain the wave velocities and quality factors of clay‐bearing sandstones as a function of pore pressure, frequency and partial saturation. The model is based on a Biot‐type three‐phase theory that considers the coexistence of two solids (sand grains and clay particles) and a fluid mixture. Additional attenuation is described with the constant‐Q model and viscodynamic functions to model the high‐frequency behaviour. We apply a uniform gas/fluid mixing law that satisfies the Wood and Voigt averages at low and high frequencies, respectively. Pressure effects are accounted for by using an effective stress law. By fitting a permeability model of the Kozeny– Carman type to core data, the model is able to predict wave velocity and attenuation from seismic to ultrasonic frequencies, including the effects of partial saturation. Testing of the model with laboratory data shows good agreement between predictions and measurements.     

Availability of coastal groundwater discharge as an alternative water resource in a large-scale reclaimed land,Korea

This study was conducted to identify the availability of coastal groundwater discharge (CGD), subsurface fluids flowing from inland through the coastal area to sea, as an alternative water resource for a large-scale reclaimed land. The behaviors of stable isotopes indicated that groundwater originated from inland precipitation and traveled as CGD along the coast line. Most of the groundwater samples collected from domestic wells installed along the old coast line were considered to be relatively fresh from the correlation analysis among chemical constituents. The average electrical conductivity (EC) values of the samples were identified as averaging 1,125–1,297 μS cm^?1, corresponding to appropriate crop growth. A weathered-rock layer in a small catchment within the reclaimed land was proved to be a main CGD pathway, with electrical resistivity anomalies ranging from 7 to 14 Ω m. Five monitoring wells were placed in this catchment to delineate the occurrence of CGD. Long-term vertical EC profiling results for the monitoring wells indicated that CGD occurs within a depth of 30 m below the ground surface. Annual monitoring data for groundwater level and EC demonstrated that the water quality of CGD was improved by introducing fresh terrestrial groundwater. A remarkable improvement in water quality (EC decrease of 900–1,600 μS cm^?1) of CGD was observed during the saline water pumping test that explains how CGD could be an alternative water resource for the reclaimed land.     

Effect of connecting rain barrels on the storage size reduction

In this article, the possibility of sharing rain barrels and the potential benefit of reducing storage size through physical and non‐physical connections of rain barrels in a community are investigated. Using the concepts of homogeneous/heterogeneous users in rainwater harvesting systems (RWHS), two simple cases of a community composed of four prospective users are examined. The first is performed with the users who have the same mean and variance in water demands (homogeneous users), and the second is with the users with different means and variances (heterogeneous users). To take account for the rainfall characteristics in different places, historical records from six cities in the USA are used for storage–reliability–yield analysis. The result indicates that required total storage can be reduced by connecting multiple rain barrels. In addition, a significant difference is found between homogeneous and heterogeneous user groups. Homogeneous users do not achieve a substantial benefit from connecting their rain barrels; these users may even be disadvantaged by sharing. In contrast, heterogeneous users receive benefit by reducing the total required storage. Most benefit is expected between users with maximum difference in mean water demands. The reduction in storage size was as considerable as 37% in this study. The quantity of storage reduction depends on locations and target reliabilities. Knowledge of the benefits and limitations of rain barrel connections can improve RWHS performance through ability to customize a network plan for individual users. Copyright © 2011 John Wiley & Sons, Ltd.     

Enhancement of the channel routing module in SWAT

The objective of this study is to demonstrate that the channel flow routing techniques used in the Soil and Water Assessment Tool (SWAT) can be sometimes inappropriate for runoff simulation in small basins. Simulated hydrographs have a tendency to underestimate peak flows or may send a false signal during the recession periods when SWAT is applied to the Mihocheon Basin in South Korea. This was particularly evident for sub‐basins that had a short travel time of much less than a day. In order to enhance the channel routing module in SWAT, an alternative routing technique in which Manning relationship is combined with a simple channel reach continuity equation is proposed in the present study. The advantage of the proposed routing technique is that parameters are readily available from channel morphological data and that it is applicable to small basins. Through simulations of specific events, this routing module that is incorporated into SWAT is almost free from instability errors and produces realistic flow depths and velocities unlike the original version of SWAT with Muskingum method. Copyright © 2009 John Wiley & Sons, Ltd.