Geochemical Aspects of Hypogene Hydrothermal Alteration Zones in the Chol‐qeshlaghi Area,NW Iran: Constrains on REEs

Chol-qeshlaghi altered area lies in the northwestern part of the post-collisional Urumieh-Dokhtar magmatic arc, NW Iran. Pervasive silicic, argillic, phyllic and propylitic altered zones appears to be intimately affiliated to the fluids derivative of upper Oligocene Khankandi granodiorite. This paper is dedicated to the identification of geochemical characteristics of hydrothermal alterations, focusing on the determination of the mass gains and losses of REEs, to gain significant insights regard...     

Transport of moderately sorted gravel at low bed shear stresses: The role of fine sediment infiltration

A reliable estimation of sediment transport in gravel‐bed streams is important for various practical engineering and biological studies (e.g., channel stability design, bed degradation/aggradation, restoration of spawning habitat). In the present work, we report original laboratory experiments investigating the transport of gravel particles at low bed shear stresses. The laboratory tests were conducted under unsteady flow conditions inducing low bed shear stresses, with detailed monitoring of the bed topography using a laser scanner. Effects of bed surface arrangements were documented by testing loose and packed bed configurations. Effects of fine sediments were examined by testing beds with sand, artificial fine sand or cohesive silt infiltrated in the gravel matrix. Analysis of the experimental data revealed that the transport of gravel particles depends upon the bed arrangement, the bed material properties (e.g., size and shape, consolidation index, permeability) and the concentration of fine sediments within the surface layer of moving grains. This concentration is directly related to the distribution of fine particles within the gravel matrix (i.e., bottom‐up infiltration or bridging) and their transport mode (i.e., bedload or suspended load). Compared to loose beds, the mobility of gravel is reduced for packed beds and for beds clogged from the bottom up with cohesive fine sediments; in both cases, the bed shear stress for gravel entrainment increases by about 12%. On the other hand, the mobility of gravel increases significantly (bed shear stress for particle motion decreasing up to 40%) for beds clogged at the surface by non‐cohesive sand particles. Copyright © 2017 John Wiley & Sons, Ltd.     

Biostratigraphy of oligocene succession in the High Folded Zone,Sulaimani, Kurdistan region,Northeastern Iraq

Oligocene and Lower Miocene sediments from High Folded Zone of Iraqi Zagros have been studied paleontologically at south of Sulaimaniyah, Kurdistan Region, NE Iraq. The identified fauna are consisted of (25) genera and species of benthonic and (16) species of planktonic foraminifera. The fauna comprises relatively abundant foraminiferal assemblages of moderate diversity. Based on the stratigraphic distribution of these species, two biozones have been recognized which are Nummulites—Rotalia and Globoquadrina dehiscens zones. These biozones indicate that the studied sections of Basara and Khewata are of Late Oligocene–Early Miocene age. Based on the microfossils, it has been found that the age of sediments is equivalent to or represents Anah and Serikagni Formations. Some previous studies described Oligocene rocks (Kirkuk Group) as interior sag basin. In the present study, the occurrence of the group inside High Folded Zone and its rich fauna content are used for the discussion of the sag basin versus normal marine water.     

Soft soil mapping using Horizontal to Vertical Spectral Ratio (HVSR) for seismic hazard assessment of Chandigarh city in Himalayan foothills,north India

The populated and expanding city of Chandigarh is located in the foothills of Himalaya, near the potentially active Main Frontal Thrust (MFT). A hazard assessment for this city is consequently of major importance. Thick sediments underlies the city and that can potentially amplify the earthquake shaking and contribute to an earthquake disaster in the city. The present study applies the Horizontal to Vertical Spectral Ratio (HVSR) ambient noise methodology to estimate the resonance frequency of the soft sediments and to obtain a first order estimate of sediment thickness. The study indicates that the soil thickness range from 30 to 270 m and that the resonance frequencies vary from 0.236 to 1.479 Hz. A smooth correlation function between soil thickness and resonance frequency is found, indicating relatively homogeneous soil.     

Management of shock loads wastewater produced from water heaters industry

Water heater manufacturing represents one sector of household electrical appliance industry. It includes several batch processes which resulted in a highly polluted wastewater as shock loads. The objective of this study was to manage the shock loads wastewater with a simple and cost-effective approach prior to final discharge into municipality. To achieve this objective, two approaches were studied. The first approach was the chemical treatment of the accumulated shock loads wastewater using alum and an anionic polymer. Although this approach produced a very high-quality effluent, it was economically and technically infeasible. The second approach was a controlled release of the shock loads to the normal daily discharge in a way that guarantees the compliance of the end-off-pipe with the National Regulatory Standards. This solution required establishment of an equalization tank for normal daily flow and a holding tank for controlled release of the shock loads. Mathematical calculations were carried out to determine the most violating parameters in order to calculate the mixing ratio the of shock loads with the normal daily flow. Full engineering design of the proposed solution was carried out. This approach was implemented and proved to be simple, easy to operate, cost-effective and can be replicated in similar batch processing manufacturing plants.     

Studies on flow characteristics of coal–oil–water slurry system

Experiments were carried out to investigate the rheological properties of coal–oil–water suspension containing solids of different sizes. Two different coal samples with mean particle sizes of 120 mesh, 175 mesh and 220 mesh were used. The coal concentration was varied from 5% to 25% by weight. Sodium silicate has been used as an additive to study the behavior of the variation of average viscosity of the suspension. A generalized correlation has been developed to predict the average viscosity of suspension in terms of particle diameter of the coal, concentration of coal, viscosity of the suspending medium and the concentration of water. Experimental investigations revealed that coal–oil–water suspensions show an increase in the viscosity with decrease in coal size but with the addition of an additive, the average viscosity tends to decrease initially up to a certain optimum dosages and thereafter it increases with further addition of additives. Two empirical correlations are proposed for average viscosity of the coal–oil–water suspension, μ_sL in terms of physical properties of the solid and viscosity of the suspending medium with and without additives.     

Floral biodiversity and geology of the Talcher Basin,Orissa, India during the Permian–Triassic interval

The review paper provides an updated account of the previous and recently published records concerning the palaeobiology and the geology of the Talcher Basin of Orissa State, India. We conclude that fossil floral species in this basin originated in the earliest Permian Talchir Formation and evolved and diversified through the Karharbari Fm., Barakar Fm., Barren Measures Fm. and the uppermost Kamthi Fm. (Late Permian–Triassic). The megaflora and the palynology of the different formations of the basin are also discussed briefly. The geological setting of the basin along with the status of different formations (especially the Kamthi Formation) has been redefined. The post‐Barakar Fm. rocks, earlier retained in the Raniganj/Kamthi, Panchet and Mahadeva formations in this basin, have been critically assessed and redefined as the Lower and Upper Kamthi formations of Late Permian and Triassic ages, respectively. Accordingly, the geological map of the basin has been modified. Permian deposits (particularly the Barakar and the lower Kamthi formations) not only have the best preserved flora but also possess the highest diversity, whereas the upper Kamthi Triassic sediments have a meagre number of taxa. The plant diversity of the basin has been discussed in detail to interpret the development of the flora, evolutionary trends and palaeoenvironments of the basin. The patchy Gangamopteris vegetation of the Talchir glacial phase has ultimately evolved and diversified through time (Karharbari Fm. to Lower Kamthi Fm.) and gave rise to the thick dense swampy forests consisting of large Glossopteris trees and other shade‐loving under‐storied pteridophytes. Several groups of plants including spores and pollen have disappeared in a ladder pattern during the Permian–Triassic interval (Lower Kamthi–Upper Kamthi Fm.) and, similarly, in steps, many new fore‐runners appeared in the Upper Kamthi Formation. Records of marine acritarchs and ichnofossils in this basin at various Permian–Triassic levels demonstrate that there were marine influences. These features suggest a paralic (coastal marine to deltaic) mode of origin of the coal beds and associated sediments in the basin. The present study also advocates the continued survival of plants, rather than a mass extinction near the vicinity of the Permian–Triassic (P–T) boundary in this basin. Copyright © 2012 John Wiley & Sons, Ltd.     

Extended Finite Element Method for the Analysis of Discontinuities in Rock Masses

The strength and deformability of rock mass primarily depend on the condition of joints and their spacing and partially on the engineering properties of rock matrix. Till today, numerical analysis of discontinuities e.g. joint, fault, shear plane and others is conducted placing an interface element in between two adjacent rock matrix elements. However, the applicability of interface elements is limited in rock mechanics problems having multiple discontinuities due to its inherent numerical difficulties often leading to non-convergent solution. Recent developments in extended finite element method (XFEM) having strong discontinuity imbedded within a regular element provide an opportunity to analyze discrete discontinuities in rock masses without any numerical difficulties. This concept is based on partition of unity principle and can be used for cohesive rock joints. This paper summarizes the mathematical frameworks for the implementation of strong discontinuities in 3 and 6 nodded triangular elements and also provides numerical examples of the application of XFEM in one and two dimensional problems with single and multiple discontinuities.     

Accuracy improvement of ASTER stereo satellite generated DEM using texture filter

The grid DEM(digital elevation model) generation can be from any of a number of sources:for instance,analogue to digital conversion of contour maps followed by application of the TIN model,or direct elevation point modelling via digital photogrammetry applied to airborne images or satellite images.Currently,apart from the deployment of point-clouds from LiDAR data acquisition,the generally favoured approach refers to applications of digital photogrammetry.One of the most important steps in such deployment i...