Comparison of Seismic Dispersion and Attenuation Models

The frequency-dependent attenuation of seismic waves causes decreased resolution of seismic images with depth, and the difference in transmission losses induces amplitude variations with offset. Transmission losses may occur due to friction or fluid movement, or may result from scattering in thin-layer. Whatever the physical mechanism, they can often be conveniently described using an empirical formulation wherein the elastic moduli and propagation velocity are complex functions of frequency.We have compiled and compared algebraically and numerically eight different models involving complex velocity: the Kolsky-Futterman model, the power-law model, Kjartansson's model, Müller's model, Azimi's second and third model, the Cole-Cole model, and the standard linear-solid model.For two different parameter sets, the attenuation and phase velocity are computed in the seismic frequency band, and the plane-wave propagation of a Ricker wavelet for the other models is compared with that for the Kolsky-Futterman model. The first parameter set consists of parameters for each of the models calculated from expressions given in the appendix. These expressions make the different models behave similarly to the KF model. The second parameter set consists of model parameters that are numerically adapted to the KF model.By selecting proper parameters, all models, except the standard linear-solid model, show behavior similar to that of the Kolsky-Futterman model. The SLS model behaves differently from the other models as the frequency goes to zero or infinity. Broadband measurement data is needed to select a specific model for a given seismic experiment.     

Erratum: Comparison of Seismic Dispersion and Attenuation Models: Stud. Geophys. Geod., 46(2002), 293-320

Studia Geophysica et Geodaetica -     

A new map of glacigenic features and glacial landsystems in central mainland Nunavut,Canada

A new digital map of glacial geomorphic features and interpreted glacial landsystems was produced for an area covering ~415 000 km² in the Keewatin Sector of the Laurentide Ice Sheet (LIS) in Nunavut. The map integrates information from previous surficial geology maps and >14 000 field stations, and is significantly improved by the detailed inventory of ~152 000 glacigenic features using high-resolution ArcticDEM data and Landsat 8 imagery. From this, we identify and map coherent patterns of landform development (landsystems) between the Manitoba border and the Arctic coast, many of which are entirely new and others that are significantly modified or updated. In particular, we recognize six separate ice streams, including one probable remnant ice stream, and we delineate numerous palimpsest streamlined landscapes with associated ice-flow trends and relative ages. A continuum of relict terrains with varying basal ice thermal conditions is mapped for the first time in the ice divide migration zone between Baker Lake and Wager Bay. In addition, deglacial cold-based retreat terrains and preserved warm-based landscapes unaffected by younger glacial events have been identified. These new georeferenced, multi-scale data sets and interpreted glacial landsystems provide a comprehensive framework to strengthen reconstructions of the glacial history and dynamics of one of the largest ice domes of the LIS, identify distinct glacial sediment transport paths for applications to mineral exploration, and test numerical modelling of the LIS in support of climate change studies and long-term evolution of modern ice sheets.     

Experimental formation of massive hydrate deposits from accumulation of CH4 gas bubbles within synthetic and natural sediments

In order for methane to be economically produced from the seafloor, prediction and detection of massive hydrate deposits will be necessary. In many cases, hydrate samples recovered from seafloor sediments appear as veins or nodules, suggesting that there are strong geologic controls on where hydrate is likely to accumulate. Experiments have been conducted examining massive hydrate accumulation from methane gas bubbles within natural and synthetic sediments in a large volume pressure vessel through temperature and pressure data, as well as visual observations. Observations of hydrate growth suggest that accumulation of gas bubbles within void spaces and at sediment interfaces likely results in the formation of massive hydrate deposits. Methane hydrate was first observed as a thin film forming at the gas/water interface of methane bubbles trapped within sediment void spaces. As bubbles accumulated, massive hydrate growth occurred. These experiments suggest that in systems containing free methane gas, bubble pathways and accumulation points likely control the location and habit of massive hydrate deposits.     

Observations of the North Equatorial Current,Mindanao Current,and Kuroshio current system during the 2006/07 El Niño and 2007/08 La Niña

Two onboard observation campaigns were carried out in the western boundary region of the Philippine Sea in December 2006 and January 2008 during the 2006/07 El Niño and the 2007/08 La Niña to observe the North Equatorial Current (NEC), Mindanao Current (MC), and Kuroshio current system. The NEC and MC measured in late 2006 under El Niño conditions were stronger than those measured during early 2008 under La Niña conditions. The opposite was true for the current speed of the Kuroshio, which was stronger in early 2008 than in late 2006. The increase in dynamic height around 8°N, 130°E from December 2006 to January 2008 resulted in a weakening of the NEC and MC. Local wind variability in this region did not appear to contribute to changes in the current system.     

一个高分辨对流层物质交换模式

在区域酸沉积模式(RADM)基础上,设计了一个高分辨对流层(TL)物质交换模式(EM3)。EM3在以下五个方面明显不同于RADM:第一,增加行星边界层(PBL)的垂直网格层次;第二、TL内考虑分层的垂直涡旋扩散系数型;第三,使用TL内分层的水平涡旋扩散系数型;第四,采用包含有植物冠层垂直结构影响的新干沉积速度型;第五,使用数值扩散小的二阶矩守恒平流格式.用EM3和RADM对OSCAR Ⅳ实例作对比模拟,结果表明EM3能更好地预测出TL内的三维物质分布规律,在同样条件下,两模式预测的PBL低层中心浓度比值均大于1.8,最大值可大于3。     

Rock bursting phenomena in a superficial rock mass in southern central Sweden

SummaryRock Bursting Phenomena in a Superficial Rock Mass in Southern Central Sweden Rock bursting phenomena have been observed in connection with excavation of two shallow sited rock tunnels in the Forsmark area in southern, central Sweden. The tunnels are excavated in gneiss granite and the rock cover varies between 5–15 m. The stress release occurred locally in the tunnels which indicates significant variations in rock stresses.In situ measurements of the triaxial stress situation carried out in the area show values of the principal stresses in the horizontal plane of a magnitude in excess of 20 MPa in the superficial rock mass. The rock stress measurements indicate a clear correspondence of the directions of the highest compressive stress and the rock foliation. There is also a clear correspondence between the directions of a vertical and a horizontal joint set and the highest compressive stress. The three-dimensional stress tensor indicates that the horizontal fractures are exposed to the smallest closure pressure, i. e. the vertical stress, which set should therefore be most open. The horizontal joint set in the superficial rock mass has a significantly higher value of aperture than the vertical sets which may be a consequence of the stress situation in the rock mass. The rock bursting is not attributed to a breakage of the rock matrix, but merely to a propagation of already existing small fractures and potential fractures. The stress situation in the Forsmark area may be regarded as an uniaxial stress field in the horizontal plane.With 12 Figures     

β-FeOOH · Cln (akaganéite) and Fe1-xO (wüstite) in hot brine from the Atlantis II Deep (Red Sea) and the uptake of amino acids by synthetic β-FeOOH · Cln

A yellowish brown precipitate in samples of Red Sea hot brine has been identified as β-FeOOH · Cl_n (akaganéite) by Guinier-Hägg X-ray diffraction techniques, transmission electron microscopy (TEM), electron diffraction and electron excited X-ray fluorescence. Microcrystals of Fe_1-xO (wüstite) were also identified by electron diffraction. Synthetic β-FeOOH · Cl_n characterized by the same techniques was identical with the brine precipitate.Bonding between β-FeOOH · Cl_n and ¹⁴C labeled amino acids is pH dependent: between pH 3 and pH 7.6 amino acids were bound to the extent of 40 to 60% or 0.6 to 0.9 mmol per kg of iron oxide hydroxide. Some selectivity in affinity for different amino acids was observed, however, the effect is insufficient to explain the unusual distribution in the Atlantis II Deep brine reported in the literature.     

Mineralogy of granulated wood ash from a heating plant in Kalmar, Sweden

The central heating plant of Kalmar, Sweden produces 200-300 tons wood ash every year. A stabilised material for nutrient recycling is produced by adding water and dolomite to the wood ash and granulating the mixture. Combined mineralogy and chemistry can be used to interpret the transformation processes that occur during hardening and weathering of the granules, thus leading to a possibility to refine the production process and final characteristics of the granules. Mineralogy was separately studied in the wood ash, dolomite, self-hardened wood ash and granules by X-ray diffraction. Magnesium- and calcium-containing minerals are most common in the ash materials in the present study. The amounts of portlandite and calcite present in self-hardened and granulated ash samples are clearly higher than those in the untreated ash, showing that these minerals are formed during the treatments. Additionally, one potassium-containing secondary mineral, syngenite, is formed during the self-hardening of wood ash. Quartz, dolomite and the Fe-K-Mg-silicate in the granules originate from dolomite. The secondary minerals gypsum and calcium silicate hydrate are present in the granules. Portlandite occurs only in control granules in the field study. This suggests that hardening of granules continues in the field and portlandite is transformed into calcite. After up to 3 years on forest soil, the crystalline compounds dolomite, calcite, quartz, ankerite, albite and alumohydrocalcite are present in granules, of which alumohydrocalcite is formed as a secondary mineral in the field. These results suggest that the dissolution of granulated wood ash is strongly delayed compared with untreated wood ash and self-hardened wood ash because of the formation of less soluble compounds during the granulation process.     

Numerical study on dry deposition processes in canopy layer

A coupling model between the canopy layer (CL) and atmospheric boundary layer (ABL) for the study of dry deposition velocity is developed. The model consists of six parts: chemical species conservation equation including absorptive factor; the species uptake action including detailed vertical variation of absorptive element in CL; momen-tum exchange in CL which is represented by a first-order closure momentum equation with an additional larger-scale diffusive term; momentum exchange in ABL which is described by a complete set of the ABL turbulent statistic parameters; absorptivity (or solubility or reflection) at the surface including effects of the physical and chemi-cal characters of the species, land type, seasonal and diurnal variations of the meteorological variables; and deposition velocity derived by distributions of the species with height in CL. Variational rules of the concentration and deposi-tion velocity with both height and time are simulated with the model for both corn and forest canopies. Results pre-dicted with the bulk deposition velocity derived in the paper consist well with experimental data.