Gravity reduction with three-dimensional atmospheric pressure data for precise ground gravity measurements

The redistribution of air masses induces gravity variations (atmospheric pressure effect) up to about 20 μgal. These variations are disturbing signals in gravity records and they must be removed very carefully for detecting weak gravity signals. In the past, different methods have been developed for modelling of the atmospheric pressure effect. These methods use local or two-dimensional (2D) surface atmospheric pressure data and a standard height-dependent air density distribution. The atmospheric pressure effect is consisting of the elastic deformation and attraction term. The deformation term can be well modelled with 2D surface atmospheric pressure data, for instance with the Green's function method. For modelling of the attraction term, three-dimensional (3D) data are required. Results with 2D data are insufficient.From European Centre for Medium-Range Weather Forecasts (ECMWF) 3D atmospheric pressure data are now available. The ECMWF data used here are characterised by a spacing of Δ and Δλ = 0.5°, 60 pressure levels up to a height of 60 km and an interval of 6 h. These data are used for modelling of the atmospheric attraction term. Two attraction models have been developed based on the point mass attraction of air segments and the gravity potential of the air masses. The modelling shows a surface pressure-independent part of gravity variations induced by mass redistribution of the atmosphere in the order of some μgal. This part can only be determined by using 3D atmospheric pressure data. It has been calculated for the Vienna Superconducting Gravimeter site.From this follows that the gravity reduction can be improved by applying the 3D atmospheric attraction model for analysing long-periodic tidal waves including the polar tide. The same improvement is expected for reduction of long-term absolute gravity measurements or comparison of gravity measurements at different seasonal times. By using 3D atmospheric pressure data, the gravity correction can be improved up to some μgal.     

Ukinrek Maars, Alaska, II. Deposits and formation of the 1977 craters

The initial phase of the eruption forming Ukinrek Maars during March and April 1977 were explosions from the site of West Maar. These were mainly phreatomagmatic and initially transitional to strombolian. Activity at West Maar ceased after three days upon the initiation of the East Maar. The crater quickly grew by strong phreatomagmatic explosions. During the first phases of phreatomagmatic activity at East Maar, large exotic blocks derived from a subsurface till were ejected. Ballistic studies indicate muzzle velocities for these blocks of 80–90 m s⁻¹.Phreatomagmatic explosions ejected both juvenile and non-juvenile material which formed a low rim of ejecta (< 26 mhigh) around the crater and a localized, coarse, wellsorted (σ_φ = 1−1.5) juvenile and lithic fall deposit. Other fine ash beds, interstratified with the coarse beds, are more poorly sorted (σ_φ = 2−3) and are interpreted as fallout of wet, cohesive ash from probably milder phases of activity in the crater. Minor base surge activity damaged trees and deposited fine ash, including layers plastered on vertical surfaces. Viscous basalt lava appeared in the center of the East Maar crater almost immediately and a lava dome gradually grew in the crater despite phreatomagmatic eruptions adjacent to it.The development of these maars appears to be mainly controlled by gradual collapse of crater and conduit walls, and blasting-out of the slumped debris by phreatomagmatic explosions when rising magma contacted groundwater beneath the regional water table and a local perched aquifer.Ballistic analysis on the ejected blocks indicates a maximum muzzle velocity of 100–150 m s^-1, values similar to those obtained from other ballistic studies on maar ejecta.     

Barriers in the science-policy-practice interface: Toward a knowledge-action-system in global environmental change research

This paper presents the results of a case study analysis from the knowledge domains of vulnerability and resilience. We analyzed 20 scientific assessments to provide empirical evidence for successes and failures in collaborative knowledge production, i.e., the joint creation of assessments reports by researchers and decision makers in policy and practice. It became clear that the latter typically use insufficiently the research-based knowledge available and researchers typically produce insufficiently knowledge that is directly usable. We found a number of functional, structural, and social factors inhibiting a joint problem identification and framing of knowledge producers and potential users: divergent objectives, needs, scope, and priorities; different institutional settings and standards, as well as differing cultural values, understanding, and mistrust. Combining understanding from multiple sources and providing mechanisms for linking solutions proposed by research with articulated needs and problems of practitioners would reduce the discrepancies in activities of different actors and result in more timely and context-appropriate solutions. In the concluding section we argue for a more locally embedded and socially contingent production of actionable knowledge and make suggestions about ways to enhance effectiveness of research-based knowledge.     

Evaluating along‐strike variation using thin‐bedded facies analysis,Upper Cretaceous Ferron Notom Delta,Utah

Thin‐bedded delta‐front and prodelta facies of the Upper Cretaceous Ferron Notom Delta Complex near Hanksville in southern Utah, USA, show significant along‐strike facies variability. Primary initiation processes that form these thin beds include surge‐type turbidity currents, hyperpycnal flows and storm surges. The relative proportion of sedimentary structures generated by each of these depositional processes/events has been calculated from a series of measured sedimentological sections within a single parasequence (PS6–1) which is exposed continuously along depositional strike. For each measured section, sedimentological data including grain size, lithology, bedding thickness, sedimentary structures and ichnological suites have been documented. Parasequence 6–1 shows a strong along‐strike variation with a wave‐dominated environment in the north, passing abruptly into a fluvial‐dominated area, then to an environment with varying degrees of fluvial and wave influence southward, and back to a wave‐dominated environment further to the south‐east. The lateral facies variations integrated with palaeocurrent data indicate that parasequence 6–1 is deposited as a storm‐dominated symmetrical delta with a large river‐dominated bayhead system linked to an updip fluvial feeder valley. This article indicates that it is practical to quantify the relative importance of depositional processes and determine the along‐strike variation within an ancient delta system using thin‐bedded facies analysis. The wide range of vertical stratification and grading sequences present in these event beds also allows construction of conceptual models of deposition from turbidity currents (i.e. surge‐type turbidity currents and hyperpycnal flows) and storm surges, and shows that there are significant interactions and linkages of these often paired processes.     

The contribution of scattering to near-surface attenuation

The rapid decrease of the acceleration spectral amplitude at high frequencies has widely been modeled by the spectral decay factor kappa (κ). Usually, the path-corrected component of κ, often called κ₀, is believed to be a local and frequency-independent site characteristic, in turn representing attenuation related to waves propagating vertically through the very shallow layers beneath the study site. Despite the known relevance of κ₀ in a wide range of seismological applications, most methods for its calculation do not fully consider the influence of the scattering component. To account for the scattering component, we present a summary of statistical observations of the seismic wavefield at sites of the Swiss seismic networks. The intrinsic properties of the wavefield show a clear dependency on the local shallow subsoil conditions with differences in the structural heterogeneity of the shallow subsoil layers producing different scattering regimes. Such deviations from the ballistic behavior (i.e., direct waves that sample only distinct directions) are indicative for local structural heterogeneities and the associated level of scatter. Albeit the attenuation term related to scattering depends nonlinearly on the intrinsic term, the results indicate that the commonly used explanation for the high-frequency decay spectrum might not be appropriate but involving the amount of scattering might allow better constrained estimates of κ₀.     

Encounters with an unearthly mudstone: Understanding the first mudstone found on Mars

The Sheepbed mudstone forms the base of the strata examined by the Curiosity rover in Gale Crater on Mars, and is the first bona fide mudstone known on another planet. From images and associated data, this contribution proposes a holistic interpretation of depositional regime, diagenesis and burial history. A lake basin probably received sediment pulses from alluvial fans. Bed cross‐sections show millimetre to centimetre‐scale layering due to distal pulses of fluvial sediment injections (fine‐grained hyperpycnites), fall‐out from river plumes, and some aeolian supply. Diagenetic features include mineralized synaeresis cracks and millimetre‐scale nodules, as well as stratiform cementation. Clay minerals were initially considered due to in situ alteration, but bulk rock chemistry and mineralogy suggests that sediments were derived from variably weathered source rocks that probably contained pre‐existing clay minerals. X‐ray diffraction analyses show contrasting clay mineralogy in closely spaced samples, consistent with at least partial detrital supply of clay minerals. A significant (ca 30 wt%) amorphous component is consistent with little post‐depositional alteration. Theoretical modelling of diagenetic reactions, as well as kinetic considerations, suggest that the bulk of diagenetic clay mineral formation occurred comparatively late in diagenesis. Diagenetic features (synaeresis cracks and nodules) were previously thought to reflect early diagenetic gas formation, but an alternative scenario of synaeresis crack formation via fabric collapse of flocculated clays appears more likely. The observed diagenetic features, such as solid nodules, hollow nodules, matrix cement and ‘raised ridges’ (synaeresis cracks) can be explained with progressive alteration of olivine/glass in conjunction with centrifugal and counter diffusion of reactive species. Anhydrite‐filled fractures in the Sheepbed mudstone occurred late in diagenesis when fluid pressures built up to exceed lithostatic pressure. Generating fluid overpressure by burial to facilitate hydraulic fracturing suggests a burial depth of at least 1000 m for the underlying strata that supplied these fluids.     

Spatio-temporal interpolation of precipitation during monsoon periods in Pakistan

Spatio-temporal estimation of precipitation over a region is essential to the modeling of hydrologic processes for water resources management. The changes of magnitude and space–time heterogeneity of rainfall observations make space–time estimation of precipitation a challenging task. In this paper we propose a Box–Cox transformed hierarchical Bayesian multivariate spatio-temporal interpolation method for the skewed response variable. The proposed method is applied to estimate space–time monthly precipitation in the monsoon periods during 1974–2000, and 27-year monthly average precipitation data are obtained from 51 stations in Pakistan. The results of transformed hierarchical Bayesian multivariate spatio-temporal interpolation are compared to those of non-transformed hierarchical Bayesian interpolation by using cross-validation. The software developed by [11] is used for Bayesian non-stationary multivariate space–time interpolation. It is observed that the transformed hierarchical Bayesian method provides more accuracy than the non-transformed hierarchical Bayesian method.     

On the use of the autocorrelation function: the constraint of using frequency band-limited signals for monitoring relative velocity changes

Correlations of seismic noise are commonly used to monitor temporal variations of relative seismic velocity in period ranges from 1 s up to 100 s. Of particular interest is the detection of small changes in the order of 0.01–0.1 % in propagation speeds. Measuring such small differences can, however, be significantly biased by temporal variations in the properties of the noise sources within the corresponding frequency band. Using synthetic data, we show that apparent relative velocity variations might appear only due to changes in the amplitude and frequency content caused by source variations. Removing such unwanted effects by applying narrow bandpass filters in the preprocessing restricts the high-resolution analysis of any signal due to Gabor’s uncertainty limit, i.e., the correlation function suffers a limited resolution to time delay estimates for small correlation times, low-frequency ranges, and in narrow frequency bands. Better understanding of spatiotemporal noise source properties and the theoretical limitations of time–frequency analysis is critical for accurate and reliable passive monitoring.     

Analyses of pre-injection reservoir data for stable carbon isotope trend predictions in CO2 monitoring: preparing for CO2 injection

Baseline monitoring at the proposed enhanced gas recovery site in Altmark (Germany) was carried out in combination with theoretical and laboratory investigations to describe and predict the principles of expected stable carbon isotope and dissolved inorganic carbon (DIC) trends during CO₂ injection in reservoirs. This provides fundamental data for site-specific characterisation for monitoring purposes. Baseline ??¹³C values at the Altmark site ranged between ?1.8 and ?11.5??? and DIC values were about 2?mmol?L^?1. These baseline values form the basis for a theoretical study on the influences of the ambient reservoir conditions on the state of geochemical and isotope equilibrium of the reservoir fluids. Transferring this theoretical study to the Altmark site enables predictions on geochemical trends during potential injection. Assuming that CO₂ would be injected at the Altmark site to pCO₂?=?100?bar and with a ??¹³C of ?30???, at isotopic and geochemical equilibrium, ??¹³C_DIC values would approach this end-member, and DIC concentrations of 1,000?mmol L^?1 would be expected. Laboratory experiments were conducted at low pCO₂ levels (4?C35?bars) to mimic the approach of a CO₂ plume at a monitoring well. These results support field investigations from other sites: that ??¹³C_DIC is a sensitive tool for monitoring CO₂ migration in the subsurface and simultaneously allows quantification of geochemical trapping of CO₂.     

CLEAN: project overview on CO2 large-scale enhanced gas recovery in the Altmark natural gas field (Germany)

The joint research project CLEAN was conducted in the years 2008?C2011 by a German research and development (R&D) alliance of 16 partners from science and industry. The project was set-up as pilot project to investigate the processes relevant to enhanced gas recovery (EGR) by the injection of CO₂ into a subfield of the almost depleted Altmark natural gas field. Despite the setback that permission for active injection was not issued by the mining authority during the period of the project, important results fostering the understanding of processes linked with EGR were achieved. Work carried out led to a comprehensive evaluation of the EGR potential of the Altmark field and the Altensalzwedel subfield in particular. The calculated safety margins emphasize that technical well integrity of the 12 examined boreholes is given for EGR without a need for any further intervention. The laboratory and field tests confirm that the Altensalzwedel subfield is suitable for the injection of 100,000?t of CO₂. Numerical simulations provide sound predictions for the efficiency and safety of the EGR technology based on the CO₂ injection. The development and testing of different monitoring techniques facilitate an improved surveying of CO₂ storage sites in general. The CLEAN results provide the technological, logistic and conceptual prerequisites for implementing a CO₂-based EGR project in the Altmark and provide a benchmark for similar projects in the world.