Levels of chlorinated hydrocarbons and trace metals in bivalves and nearshore sediments from the Dominican Republic

Bivalves (Crassostrea rizhophorae, Isognomon alatus, Codakia orbicularis Linné, and Tellina fausta) and sediment samples collected from 12 locations along the Dominican Republic coastline were used to assess the degree of nearshore contamination by selected chlorinated hydrocarbons and heavy metals. Concentrations of total chlordanes, DDTs and PCBs ranged from 0.51 to 7.47 ng/g, < MDL to 30.9 ng/g and 11.3 to 82.3 ng/g, and from < MDL to 1.73 ng/g, 0.21 to 12.5 ng/g and 0.46 to 41.9 ng/g in bivalves and surface sediments, respectively. The concentration ranges of predominantly anthropogenic Cu, Pb and Zn were 3.08–866 μg/g, 0.08–1.46 μg/g and 22.9–4380 μg/g in bivalve soft parts and 1.01–111 mg/g, 0.420–134 μg/g and 1.96–277 μg/g in surface sediments, respectively. Mercury concentrations ranged from 0.290 to 7.02 μg/g and from 0.096 to 0.565 μg/g in both matrices. The relatively high Hg concentrations found in bivalves from two stations in Bahia Samana, near to a known source of past Hg contamination in the sediments, require a more in-depth survey of the area. In general the concentrations of selected chlorinated hydrocarbons and trace metals, compared with those reported for the same matrices in the Caribbean and west Atlantic coastal areas, show at present the existence of only very localized contamination problems in the Dominican Republic.     

Dynamics of lava flow fronts, Arenal Volcano, Costa Rica

Arenal Volcano has effused basaltic andesite lava flows nearly continuously since September, 1968. The two different kinds of material in flows, lava and lava debris, have different rheologic properties and dynamic behavior. Flow morphology depends on the relationship between the amount and distribution of the lava and the debris, and to a lesser extent the ground morphology.Two main units characterize the flows: the channel zone and the frontal zone. The channel zone consists of two different units, the levées and the channel proper. A velocity profile in the channel shows a maximum value at the plug where the rate of shear is zero, and a velocity gradient increasing outward until, at the levées, the velocity becomes zero. Cooling produces a marked temperature gradient in the flow, leading to the formation of debris by brittle fracture when a critical value of shear rate to viscosity is reached. When the lava supply ceases, much of this debris and part of the lava is left behind after the flow nucleus drains out, forming a collapsed channel.Processes at the frontal zone include levée formation, debris formation, the change in shape of the front, and the choice of the flow path. These processes are controlled primarily by the rheological properties of the lava.Frontal zone dynamics can be understood by fixing the flow front as the point of reference. The lava flows through the channel into the front where it flows out into the levées, thereby increasing the length of the channel and permitting the front to advance. The front shows a relationship of critical height to the yield strength (τ₀) surface tension, and slope; its continued movement is activated by the pressure of the advancing lava in the channel behind. For an ideal flow (isothermal, homogeneous, and isotropic) the ratio of the section of channel proper to the section of levées is calculated and the distance the front will have moved at any time t_x can be determined once the amount of lava available to the front is known. Assuming that the velocity function of the front {G(t)} during the collapsing stage is proportional to the entrance pressure of the lava at the channel-front boundary, an exponential decrease of velocity through time is predicted, which shows good agreement with actual frontal velocity measurements taken on two flows. Local variations in slope have a secondary effect on frontal velocities.Under conditions of constant volume the frontal zone can be considered as a machine that consumes energy brought in by the lava to perform work (front advancement). While the front will use its potential energy to run the process, the velocity at which it occurs is controlled by the activation energy that enters the system as the kinetic energy of the lava flowing into the front. A relation for the energy contribution due to frontal acceleration is also derived. Finally the entrance pressure, that permits the front to deform, is calculated. Its small value confirms that the lava behaves very much like a Bingham plastic.     

PM2.5 co-benefits of climate change legislation part 2: California governor’s executive order S-3-05 applied to the transportation sector

California Governor’s Executive Order (CGEO) S-3-05 requires that California greenhouse gas (GHG) emissions be reduced to 80 % below 1990 levels by the year 2050. Meeting this target will require drastic changes in transportation technology, fuel, and behavior which will reduce criteria pollutant emissions as well as GHG emissions. The improvement to local air quality caused by the reduced criteria pollutant emissions must be calculated to fully evaluate the overall benefits and costs of CGEO S-3-05. In the present study, seven different transportation scenarios that move towards the goals of CGEO S-3-05 in the transportation sector were examined to determine how they would affect future airborne particulate matter (PM_2.5) concentrations in California: (1) hydrogen fuel cells, (2) electric vehicles, (3) high efficiency vehicles, (4) public mass transit, (5) biofuels, (6) biofuels + hybrid electric vehicles, and (7) hydrogen fuel cells + electric vehicles. The air quality implications of each scenario were evaluated using a chemical transport model applied during a wintertime stagnation episode representing future climate in California. Scenarios (6) and (7) reduced population-weighted PM_2.5 mass concentrations by ~9 % and PM_2.5 elemental carbon (EC) concentrations by ~30 % relative to base-case predictions.     

Bivalves,Tributyltin and Green Tides: Ecosystem-Level Impact?

Filter feeders such as bivalves are increasingly being shown to control phytoplankton blooms in eutrophic estuaries. The possibility of such a top-down effect on macroalgae, however, has not been considered previously even though most green tide algal species reproduce by pelagic swarmers that are equivalent to phytoplankton. This work presents circumstantial evidence from an oyster-culturing French embayment where, despite eutrophication since the mid-1970s, macroalgae did not proliferate until 1982. This was also the year when tributyltin pollution from antifouling paints dropped substantially following a world-wide prime ban that was implemented to save the shellfish industry. From the recorded evolution of the oyster stock, it is shown how tributyltin reduced the bivalve filter capacity within those years and resulted in Enteromorpha swarmers being much more likely to germinate and bloom. This suggests that the green tides had been successively contained by the biological activity and the chemical pressure. The effects of the latter on the former would thus have cascaded to ecosystem-level changes, and so the functional role of bivalves should be evaluated and preserved wherever relevant.     

Centaurus A: VLT Views of the Nearest Giant Elliptical Galaxy

VLT images in BVI are used to identify globular clusters in the central region of NGC5128. Based on the sizes, optical magnitudes and colors, a hundred candidate globular clusters are identified with projected galactocentric distances 1 kpc < R _G < 5 kpc. These clusters have magnitudes 18 < V < 20.5 or ?10.3 < M _V < ?7.8 at the distance of this galaxy, and colors 0.8 < V?I < 1.5 and 0.5 < B?V < 1.5. These identifications allow us to compare the properties of the X-ray globular cluster population discovered recently in this galaxy.     

Preliminary assessment of the ATHENA/WFI non-X-ray background

We present a preliminary assessment of the non-X-ray background for the WFI on board ATHENA conducted at IAAT in the context of the collaborative background and radiation damage working group activities. Our main result is that in the baseline configuration originally assumed for the camera the requirement on the level of non-X-ray background could not be met. In light of the results of Geant4 simulations we propose and discuss a possible optimization of the camera design and pinpoint some open issues to be addressed in the next phase of investigation. One of these concerns the possible contribution to the non-X-ray background from soft protons and ions funneled to the focal plane through the optics. This is not quantified at this stage, here we just briefly report on our ongoing activities aimed at validating the mechanisms of proton scattering at grazing incidence.