Fluid geochemistry in the Ivigtut cryolite deposit, South Greenland

The 1.27 Ga old Ivigtut (Ivittuut) intrusion in South Greenland is world-famous for its hydrothermal cryolite deposit [Na₃AlF₆] situated within a strongly metasomatised A-type granite stock. This detailed fluid inclusion study characterises the fluid present during the formation of the cryolite deposit and thermodynamic modelling allows to constrain its formation conditions.Microthermometry revealed three different types of inclusions: (1) pure CO₂, (2) aqueous-carbonic and (3) saline-aqueous inclusions. Melting temperatures range between − 23 and − 15 °C for type 2 and from − 15 to − 10 °C for type 3 inclusions. Most inclusions homogenise between 110 and 150 °C into the liquid.Stable isotope compositions of CO₂ and H₂O were measured from crushed inclusions in quartz, cryolite, fluorite and siderite. The δ¹³C values of about − 5‰ PDB are typical of mantle-derived magmas. The differences between δ¹⁸O of CO₂ (+ 21 to + 42‰ VSMOW) and δ¹⁸O of H₂O (− 1 to − 21.7‰ VSMOW) suggest low-temperature isotope exchange. δD (H₂O) ranges from − 19 to − 144‰ VSMOW. The isotopic composition of inclusion water closely follows the meteoric water line and is comparable to Canadian Shield brines. Ion chromatography revealed the fluid's predominance in Na, Cl and F. Cl/Br ratios range between 56 and 110 and may imply intensive fluid–rock interaction with the host granite.Isochores deduced from microthermometry in conjunction with estimates for the solidification of the Ivigtut granite suggest a formation pressure of approximately 1–1.5 kbar for the fluid inclusions. Formation temperatures of different types of fluid inclusions vary between 100 and 400 °C. Thermodynamic modelling of phase assemblages and the extraordinary high concentration in F (and Na) may indicate that the cryolite body and its associated fluid inclusions could have formed during the continuous transition from a volatile-rich melt to a solute-rich fluid.     

The resin sealed column (RESECO) setup for flow-through experiments on solid rocks under high temperature and high pore pressure conditions

Hydrogeology Journal - High-pressure flow-through experiments on solid rock samples are commonly conducted with experimental setups using a confining pressure to restrict the flow to the rock....     

Geothermal Characterization of the St. Lawrence Lowlands Sedimentary Basin,Québec,Canada

Defining temperature at depth to identify geothermal resources relies on the evaluation of the Earth heat flow based on equilibrium temperature measurements as well as thermal conductivity and heat generation rate assessment. Such high-quality geothermal data can be sparse over the region of interest. This is the case of the St. Lawrence Lowlands sedimentary basin covering 20,000 km² to the south of Québec, Canada, and enclosing only three wells up to a depth of 500 m with equilibrium heat flow measurements. However, more than 250 oil and gas exploration wells have been drilled in this area, providing for this study (parce que c'est 93 sinon) 81 locations with bottom-hole temperature up to a depth of 4300 m, however, not at equilibrium. Analyzing these data with respect to the deep geothermal resource potential of this sedimentary basin requires evaluating the thermal conductivity and heat generation rate of its geological units to properly extrapolate temperature downward. This was done by compiling literature and recent thermal conductivity measurements in outcrop and core samples as well as new heat generation rate estimates from spectral gamma ray logs to establish a first thermal assessment of geological units deep down into the basin. The mean thermal conductivity of the thermal units varies from 2.5 to 6.3 W/m·K, with peak values in the basal sandstones, while the heat generation rate varies from 1.6 to 0.3 µW/m³, decreasing from the upper caprocks toward the base of the sequence. After correcting the bottom-hole temperatures for drilling disturbance with the Harrison correction and subsequently for paleoclimate variations, results indicate a mean geothermal gradient of 23.1 °C/km, varying from 14 to 40 °C/km. Evaluating the basin thermal state from oil and gas data is a significant challenge facilitated by an understanding of its thermal properties.     

Review: Satellite-based remote sensing and geographic information systems and their application in the assessment of groundwater potential, with particular reference to India

Various hydrological, geological and geomorphological factors play a major role in the occurrence and movement of groundwater in different terrains. With advances in space technology and the advent of powerful personal computers, techniques for the assessment of groundwater potential have evolved, of which remote sensing (RS) and geographic information systems (GIS) are of great significance. The application of these methods is comprehensively reviewed with respect to the exploration and assessment of groundwater potential in consolidated and unconsolidated formations in semi-arid regions, and specifically in India. The process of such assessment includes the collection of remotely sensed data from suitable sensors and the selection of thematic maps on rainfall, geology, lithology, geomorphology, soil, land use/land cover, drainage patterns, slope and lineaments. The data are handled according to their significance with the assignment of appropriate weights and integrated into a sophisticated GIS environment. The requisite remote sensing and GIS data, in conjunction with necessary field investigations, help to identify the groundwater potential zones effectively.     

Use of Remotely-Derived Bathymetry for Modelling Biomass in Marine Environments

The paper presents results on the influence of geometric attributes of satellite-derived raster bathymetric data, namely the General Bathymetric Charts of the Oceans, on spatial statistical modelling of marine biomass. In the initial experiment, both the resolution and projection of the raster dataset are taken into account. It was found that, independently of the equal-area projection chosen for the analysis, the calculated areas are very similar, and the differences between them are insignificant. Likewise, any variation in the raster resolution did not change the computed area. Although the differences were shown to be insignificant, for the subsequent analysis we selected the cylindrical equal area projection, as it implies rectangular spatial extent, along with the automatically derived resolution. Then, in the second experiment, we focused on demersal fish biomass data acquired from trawl samples taken from the western parts of ICES Sub-area VII, near the sea floor. The aforementioned investigation into processing bathymetric data allowed us to build various statistical models that account for a relationship between biomass, sea floor topography and geographic location. We fitted a set of generalised additive models and generalised additive mixed models to combinations of trawl data of the roundnose grenadier (Coryphaenoides rupestris) and bathymetry. Using standard statistical techniques—such as analysis of variance, Akaike information criterion, root mean squared error, mean absolute error and cross-validation—we compared the performance of the models and found that depth and latitude may serve as statistically significant explanatory variables for biomass of roundnose grenadier in the study area. However, the results should be interpreted with caution as sampling locations may have an impact on the biomass–depth relationship.     

Evaluating the geothermal heat pump potential from a thermostratigraphic assessment of rock samples in the St. Lawrence Lowlands,Canada

The installation cost and the performance of geothermal heat pump systems are influenced by the thermal state and properties of the subsurface. The ground ability to transfer heat described by thermal conductivity is a dominant factor affecting the favorability of closed-loop ground heat exchangers installed in vertical boreholes. A study that aimed at evaluating the geothermal heat pump potential by mapping the thermal conductivity of rock sequences was, therefore, performed for the St. Lawrence Lowlands sedimentary basin in Canada. Thermal conductivity was measured in the laboratory on rock samples collected in outcrops and used to complete design calculations of a geothermal system with a single borehole. Results allowed the definition of thermostratigraphic units that can be linked to depositional environments. Basal quartz-rich sandstones formed in a rift environment show a high geothermal potential. Overlying dolomites, argillaceous limestones and shales deposited in a passive margin evolving to a foreland basin exhibit a transition toward the top from high to low geothermal potential. Upper turbidites and molasses have a moderate geothermal potential. The thermal conductivity of the thermostratigraphic units is dominantly influenced by the mineralogy of the sedimentary rocks. Understanding their origin is a key to improve geothermal resource assessment and system design to anticipate new installations in the area.     

Morphometric analysis of Araniar river basin using remote sensing and geographical information system in the assessment of groundwater potential

Morphometric analysis using remote sensing (RS) and geographical information system (GIS), in the recent study, has become an efficient method in the assessment of groundwater potential of a river basin. The present study focused on the morphometric analysis of Araniar river basin using RS and GIS techniques in the identification of groundwater potential zones for effective planning and management of groundwater resources of the basin. The study area was divided into six subbasins for the purpose of micro-level morphometric analysis. The main stream of the basin is of fifth order and drainage patterns of subbasins are mostly of dendritic and parallel type. Based on the linear, areal and relief parameters of subbasins, the groundwater potential zones of the basin were identified and the results substantiated with geomorphology map derived from RS data. The elongated shape, favourable drainage network, permeable geologic formation and low relief of the subbasins WS3, WS5 and WS6 make them the promising groundwater potential zones of Araniar river basin. The statistical analysis and overlay analysis of the morphometric parameters also indicated the subbasins WS3, WS5 and WS6 as high groundwater potential zones. The groundwater potential zone map when overlaid with groundwater fluctuation map indicated the suitable sites for artificial recharge structures.     

Source potential and palynofacies of Late Jurassic “Lemeš facies”, Croatia

Laminated limestone and calcareous shale outcrop samples from the Late Jurassic “Leme?” facies (Croatia) were investigated to characterize their organic facies and palynofacies and their hydrocarbon generative potential. The results indicate that the organic rich sediments of “Leme?” facies were deposited within a relatively shallow marine environment at low redox potential, characterized as an oxygen depleted depositional setting with stratified bottom waters of the carbonate platform (Adriatic Carbonate Platform). The organic rich samples contain a high portion of lipid rich amorphous kerogen of algal/phytoplankton origin, enriched by bacterial biomass. Most of the analyzed samples have total organic carbon contents (TOC) greater than 3%, Rock-Eval S2 >20 mg HC/g rock, yielding Hydrogen Index (HI) values ranging from 509–602 mg HC/g TOC. According to these results, the analyzed samples have very good to excellent oil generative potential. Relatively high sulfur content suggests that the kerogen is best described as Type II-S. Biomarker maturity parameters, as well as the fluorescence of the isolated kerogen, show that the organic matter is at early to peak oil thermal maturity. The observed level of thermal maturity indicates that these samples were once buried to depths of ～5.5–5.8 km before being uplifted in the late Tertiary. The surface outcrops of the “Leme?” facies suggest that these strata have significant source potential and are the likely source of oil in the Croatian External Dinarides.