Canonical theory of perturbations using eccentric anomaly as independent variable

It is shown in this paper how to build a canonical transformation of variables, so that the eccentric anomaly becomes the new independent variable. In the case of eccentric elliptical orbits it changes the equations of motion so, that they can be integrated analytically to any order of approximation comparatively easy.     

Dinoflagellate cysts in Upper Quaternary sediments from southwestern Norway and potential correlations with the oceanic record

Twenty-two samples from two locations at the Foss-Eigeland clay and gravel pit, Jæren, southwestern Norway were analysed for dinoflagellate cysts. Cyst recovery was generally poor and cyst assemblages indicate a cold temperate to arctic glacimarine environment. The percentage composition of a total of 19 cyst species identified allowed the recognition of five assemblage zones. These are thought to reflect fluctuating minor climatic changes during an interstadial period preceding the last glacial advance in the region. Cyst assemblages from these supposedly Middle Weichselian sediments at Foss-Eigeland are similar to those found in the northern North Sea and the Norwegian Sea in probably similarly aged sediments. This suggests a potential for using dinoflagellate cysts to correlate land-based Quaternary sequences with the deep sea record.     

Process length variation in cysts of the dinoflagellate Protoceratium reticulatum,from surface sediments of the Baltic–Kattegat–Skagerrak estuarine system: a regional salinity proxy

Mertens, K. N., Dale, B., Ellegaard, M., Jansson, I.‐M., Godhe, A., Kremp, A. & Louwye, S. 2010: Process length variation in cysts of the dinoflagellate Protoceratium reticulatum, from surface sediments of the Baltic–Kattegat–Skagerrak estuarine system: a regional salinity proxy. Boreas, 10.1111/j.1502‐3885.2010.00193.x. ISSN 0300‐9483. Results are presented from a regional comparison of average process length variation in cysts of Protoceratium reticulatum and Lingulodinium polyedrum, extracted from surface sediments in the Skagerrak–Kattegat–Baltic estuarine system, with the environmental variables of seawater temperature and salinity. Although too few cysts of Lingulodinium polyedrum were recovered from the sediments to make reliable correlations, cysts of Protoceratium reticulatum were well represented, and average process length was correlated significantly with both salinity and temperature. Owing to dominant summer surface production, and regional covariation between salinity and density, we propose the use of the significant correlation with summer sea surface salinity (SSS_summer) by the equation SSS_summer=3.16 × average process length ?0.84 (R²=0.8). Application of this equation down‐core in Limfjord (northern Denmark) shows its usefulness as a regional palaeosalinity proxy.     

Phytoplankton community composition in nearshore coastal waters of Louisiana

Phytoplankton community compositions within near-shore coastal and estuarine waters of Louisiana were characterized by group diversity, evenness, relative abundance and biovolume. Sixty-six taxa were identified in addition to eight potentially harmful algal genera including Gymnodinium sp. Phytoplankton group diversity was lowest at Vermillion Bay in February 2008, but otherwise ranged between 2.16 and 3.40. Phytoplankton evenness was also lowest at Vermillion Bay in February 2008, but otherwise ranged between 0.54 and 0.77. Dissolved oxygen increased with increased biovolume (R2 = 0.85, p < 0.001) and biovolume decreased with increased light attenuation (R2 = 0.34, p = 0.007), which supported the importance of light in regulating oxygen dynamics. Diatoms were dominant in relative abundance and biovolume at almost all stations and all cruises. Brunt-V?is?l? frequency was used as a measure of water column stratification and was negatively correlated (p = 0.02) to diatom relative percent total abundance.     

Interactions between freshwater input, light, and phytoplankton dynamics on the Louisiana continental shelf

We examined the effects of freshwater flow and light availability on phytoplankton biomass and production along the Louisiana continental shelf in the region characterized by persistent spring–summer stratification and widespread summer hypoxia. Data were collected on 7 cruises from 2005 to 2007, and spatially-averaged estimates of phytoplankton and light variables were calculated for the study area using Voronoi polygon normalization. Shelf-wide phytoplankton production ranged from 0.47 to 1.75 mg C m⁻² d⁻¹ across the 7 cruises. Shelf-wide average light attenuation (k_d) ranged from 0.19–1.01 m⁻¹ and strongly covaried with freshwater discharge from the Mississippi and Atchafalaya Rivers (R²=0.67). Interestingly, we observed that the euphotic zone (as defined by the 1% light depth) extended well below the pycnocline and to the bottom across much of the shelf. Shelf-wide average chlorophyll a (chl a) concentrations ranged from 1.4 to 5.9 mg m⁻³ and, similar to k_d, covaried with river discharge (R²=0.83). Also, chl a concentrations were significantly higher in plume versus non-plume regions of the shelf. When integrated through the water-column, shelf-wide average chl a ranged from 26.3 to 47.6 mg m⁻², but did not covary with river discharge, nor were plume versus non-plume averages statistically different. The high integrated chl a in the non-plume waters resulted from frequent sub-pycnocline chl a maxima. Phytoplankton production rates were highest in the vicinity of the Mississippi River bird's foot delta, but as with integrated chl a were not statistically different in plume versus non-plume waters across the rest of the shelf. Based on the vertical distribution of light and chl a, a substantial fraction of phytoplankton production occurred below the pycnocline, averaging from 25% to 50% among cruises. These results suggest that freshwater and nutrient inputs regulate shelf-wide k_d and, consequently, the vertical distribution of primary production. The substantial below-pycnocline primary production we observed has not been previously quantified for this region, but has important implications about the formation and persistence of hypoxia on the Louisiana continental shelf.     

A thermodynamic model for Ca–Na clinoamphiboles in Na2O–CaO–FeO–MgO–Al2O3–SiO2–H2O–O for petrological calculations

A calibration is presented for an activity–composition model for amphiboles in the system Na₂O–CaO–FeO–MgO–Al₂O₃–SiO₂–H₂O–O (NCFMASHO), formulated in terms of an independent set of six end‐members: tremolite, tschermakite, pargasite, glaucophane, ferroactinolite and ferritschermakite. The model uses mixing‐on‐sites for the ideal‐mixing activities, and for the activity coefficients, a macroscopic multicomponent van Laar model. This formulation involves 15 pairwise interaction energies and six asymmetry parameters. Calibration of the model is based on the geometrical constraints imposed by the size and shape of amphibole solvi inherent in a data set of 71 coexisting amphibole pairs from rocks, formed over 400–600 °C and 2–18 kbar. The model parameters are calibrated by combining these geometric constraints with qualitative consideration of parameter relationships, given that the data are insufficient to allow all the model parameters to be determined from a regression of the data. Use of coexisting amphiboles means that amphibole activity–composition relationships are calibrated independently of the thermodynamic properties of the end‐members. For practical applications, in geothermobarometry and the calculation of phase diagrams, the amphibole activity–composition relationships are placed in the context of the stability of other minerals by evaluating the properties of the end‐members in the independent set that are in internally consistent data sets. This has been performed using an extended natural data set for hornblende–garnet–plagioclase–quartz, giving the small adjustments necessary to the enthalpies of formation of tschermakite, pargasite and glaucophane for working with the Holland and Powell data set.     

Counter point bar deposits: lithofacies and reservoir significance in the meandering modern Peace River and ancient McMurray Formation, Alberta, Canada

Counter point bar deposits in the meandering Peace River, North‐central Alberta, Wood Buffalo National Park, are distinct from point bar deposits in terms of morphology, lithofacies and reservoir potential for fluids. Previously referred to as the distal‐most parts of point bars, point bar tails and concave bank‐bench deposits, counter point bar deposits have concave morphological scroll patterns rather than convex as with point bars. The Peace is a large river (bankfull discharge 11 700 m³ sec^?1, width 375 to 700 m, depth 15 m, gradient 0·00004 or 4 cm km^?1) in which counter point bar deposits are dominated by silt (80% to 90%), which contrasts with sand‐dominant (90% to 100%) point bar deposits. Beginning at the meander inflection (transition from convex to concave), counter point bar deposit stratigraphy thickens as a wedge‐like architecture in the distal direction until the deposit is nearly as thick as the point bar deposits. The low permeability silt‐dominant lithofacies in counter point bar deposits will limit reservoir extent and movement of fluids in both modern and ancient subsurface fluvial deposits. In the exploration and extraction of bitumen and heavy oil in subsurface fluvial rocks, identification and mapping of reservoir potential of point bar deposits and counter point bar deposits is now possible in the fluvial‐dominated tidal estuarine Lower Cretaceous Middle McMurray Formation, North‐east Alberta. Recent geophysical advances have facilitated imaging of some ancient buried point bar deposits and counter point bar deposits which, on the basis of morphological shape of sedimentary bodies observed from seismic amplitude, can be interpreted and mapped as depositional elements or blocks that contain associated sandstone or siltstone dominant lithofacies, respectively. As counter point bar deposits exhibit poor permeability and thus limit reservoir potential for water, natural gas, light crude, heavy oil and bitumen, counter point bar deposits should be avoided in resource developments. Geophysical imaging, interpretation and mapping of point bar deposit and counter point bar deposit elements provide new opportunities to improve recovery of bitumen and heavy oil and reduce development costs in subsurface cyclic steam stimulation and steam‐assisted gravity drainage projects by not drilling into counter point bar deposits.     

Suppression of wind turbine noise from seismological data using nonlinear thresholding and denoising autoencoder

Journal of Seismology - Seismologists found a significant deterioration in station quality after installation of wind turbines (WTs), which led to conflicts between WT operators and seismic...