排序方式: 共有76条查询结果,搜索用时 15 毫秒
1.
Since the 1997 local ban on ocean dumping of dredged sediments, the States of New York and New Jersey have pursued a policy of environmentally sound solutions to the management of dredged material, including beneficial use of stabilized dredged material (SDM) in transportation applications. A pilot study was initiated in 1998 to evaluate the use of SDM in the construction of highway embankments. Utilizing 80,000 cubic yards of dredged material, two embankments were constructed from SDM on a commercial development area adjacent to the Harbor. Geotechnical properties and handling of SDM were evaluated both during and one year post - construction. This article presents the evaluation of the embankments themselves, including constructability and performance. The results demonstrate that SDM satisfies most of the geotechnical criteria for fill construction, except those for durability, requiring proper coverage and protection similar to that provided for fills constructed on cohesive soils. This same characteristic precludes long term stockpiling of SDM prior to final placement, limiting applications to those that have schedules overlapping with dredging projects. Increased costs for the use of SDM can be as high as $8 per cubic yard over traditional fills; however, this cost may be recouped through management fees collected from dredging projects. 相似文献
2.
A combined mathematical geophysical model for prediction of pyrite oxidation and pollutant leaching associated with a coal washing waste dump 总被引:3,自引:0,他引:3
F. Doulati Ardejani Ph.D. B. Jodieri Shokri M.Sc. A. Moradzadeh Ph.D. E. Soleimani Ph.D. M. Ansari Jafari Ph.D. 《International Journal of Environmental Science and Technology》2008,5(4):517-526
The waste produced by coal washing process produces many environmental problems. In this study, the pollution problems associated with the waste produced by Alborz Sharghi Coal Washing Plant was investigated by mathematical modeling. The study area is located at 11 km. to Razmjah coal region and 45 km. to Tehran-Mashhad road in the north part od Iran. To achieve the goal, a few samples were taken from different depths at three points on the waste dump in order to investigate pyrite oxidation and pollution generation. The samples were then analysed, using an AA-670 Shimadzu atomic absorption to determine the fraction of pyrite remained within the waste particles. A numerical finite volume model using Phoenics package has been developed to simulate pyrite oxidation and pollution generation from the Alborz Sharghi coal washing waste dump. The pyrite oxidation reaction is described by the shrinking-core model. Gaseous diffusion is the main mechanism for the transport of oxygen through the waste. The results of numerical modelling were compared with the field observations and close agreement was achieved. A simple mathematical model incorporating advection and hydrodynamic dispersion processes was also presented in order to verify the results of geophysical time-laps method showing transportation of the pollutants through the downstream of the waste dump. Both mathematical model and geophysical time-laps method are agreed in the identification of pollutant transport emanated from the waste dump. The results of such investigations can be used for designing an effective environmental management program. 相似文献
3.
A robust contact theory can be regarded as key to three dimensional discontinuous deformation analyses (3D-DDA). Not only must this theory provide an efficient algorithm to judge the type and location of contacts but also it must be able to present comprehensive formulations for every kind of contact (open, sliding and locked contact). There are six types of contact in three dimensional discontinuous deformation analyses (vertex-to-vertex, vertex-to-edge, vertex-to-face, edge-to-edge, edge-to-face and face-to-face) that can be converted to vertex-to-face and edge-to-edge contacts. This paper presents a new model of edge-to-edge contact to three dimensional discontinuous deformation analyses (3D-DDA). This new model considers both kinds of edge-to-edge contact (cross-over and parallel edge-to-edge contact) and presents a criterion for inter-penetration. Sub matrices of normal and shear spring and friction force are derived by geometrical analysis and penalty method. This new model is implemented in a 3D-DDA computer programme, and the example results demonstrate the validity of the model. 相似文献
4.
5.
The ability of fuzzy logic algorithms to model relationships between stream flow and suspended sediment discharge was investigated
using daily measurements of stream flow and suspended sediment discharge for the Escanaba River mouth station, situated on
the shore of Lake Michigan and operated by the US Geological Survey. Three different configurations of inputs were applied,
whereby the inputs were fuzzified into fuzzy subsets of variables by means of triangular membership functions. The relationships
between inputs and suspended sediment discharge (output) were represented by a set of fuzzy rule expressed in IF–THEN format.
The weighted average method served for defuzzification. The commonly used sediment rating curve was also applied to the data,
and its performance compared with that of the three models by means of statistical analyses. For all three models, suspended
sediment discharge predicted by the fuzzy logic algorithm was in satisfactory agreement with observations. Furthermore, the
fuzzy logic algorithms performed better than the sediment rating curve, particularly at higher rates of suspended sediment
discharge (in this study, more than 50 × 106 g/day). Considered collectively, the use of fuzzy logic algorithms is suggested as a simple and effective approach for better
prediction of suspended sediment discharge, also for estuaries. 相似文献
6.
Mohammad Ashtari Jafari 《Natural Hazards》2007,42(1):237-252
The Bayesian probability estimation seems to have efficiencies that make it suitable for calculating different parameters
of seismicity. Generally this method is able to combine prior information on seismicity while at the same time including statistical
uncertainty associated with the estimation of the parameters used to quantify seismicity, in addition to the probabilistic
uncertainties associated with the inherent randomness of earthquake occurrence. In this article a time-independent Bayesian
approach, which yields the probability that a certain cut-off magnitude will be exceeded at certain time intervals is examined
for the region of Alborz, Iran, in order to consider the following consequences for the city of Tehran. This area is located
within the Alpine-Himalayan active mountain belt. Many active faults affect the Alborz, most of which are parallel to the
range and accommodate the present day oblique convergence across it. Tehran, the capital of Iran, with millions of inhabitants
is located near the foothills of the southern Central Alborz. This region has been affected several times by historical and
recent earthquakes that confirm the importance of seismic hazard assessment through it. As the first step in this study an
updated earthquake catalog is compiled for the Alborz. Then, by assuming a Poisson distribution for the number of earthquakes
which occur at a certain time interval, the probabilistic earthquake occurrence is computed by the Bayesian approach. The
highest probabilities are found for zone AA and the lowest probabilities for zones KD and CA, meanwhile the overall probability
is high. 相似文献
7.
A. Maher W. S. Douglas D. Yang F. Jafari V. R. Schaefer 《Marine Georesources & Geotechnology》2013,31(3-4):221-235
A preliminary study was conducted to determine the potential for cement deep soil mixing (CDSM) technology as a method for in-situ solidification of contaminated river and estuarine sediments. The study was conducted in Newark Bay, near the mouth of the Passaic River, New Jersey. The primary objective of the study was to evaluate the viability of CDSM for the in-situ S/S with a focus on: 1) determining the correct mix of the cement slurry, which provides rapid stabilization of the sediment matrix, 2) potential resuspension of solids during CSDM operations, 3) the effects of high organic content on the solidification process, and 4) the feasibility of using conventional dredging/extraction methods once the sediments have been stabilized and allowed to cure. The results of the study show CDSM slurry mixtures, as low as 7% in cement content, result in significant solidification and strength gain of in-situ sediments under ambient conditions. In sediments with very high organic contents (> 20%), the slurry mix would need to be adjusted to account for retardation effects of organics on cement hydration. Sediment resuspension during application was shown to be minimal at a distance of as little as 75 feet from the mixing head. Strength gains were considerable, effectively consolidating the sediment particles in a secure matrix, but not so high as to preclude extraction of solidified sediments with conventional dredging equipment. Dredged solidified sediment exhibited characteristics of a stiff glacial clay, and as such was easier to handle and transport than untreated dredged sediments. This technique has high potential to be used as an interim remedial measure prior to either extraction and decontamination/disposal or proper capping. 相似文献
8.
O. Jafari M. Rahimi F. Hosseini Kakavandi N. Azimi 《International Journal of Environmental Science and Technology》2017,14(8):1651-1664
In the present study, Cu (II) ions removal from aqueous solution was intensified by exciting magnetic nanoparticles under inert gas, magnetic field and combination of these two mixing methods in a T-type microchannel. The flow patterns and liquid–liquid two-phase mass transfer were studied in three different magnet distances from mixing channel (3, 6 and 10 mm) and also in the presence of different inert gas flow rates (1, 3 and 5 mL/min). Depending on the mixing method and the flow rate of both phases, several distinct flow patterns were observed including slugs, droplet, parallel and dispersed flows. The performances of mixing techniques for mass transfer enhancement based on relative removal efficiency ratio (λ) and mass transfer coefficient ratio (γ) were compared with simple layout (without nanoparticles, magnetic field and inert gas). The results showed that simultaneous using of inert gas and magnetic field can drive the nanoparticles as mixer. Liquid–liquid mass transfer with 27–62% enhancement in E and 235–285% in K L a compared with plain one was observed. 相似文献
9.
In this study complete BV light curves of the W Ursae Majoris binary V1073 Cygni obtained in 2005 are presented. We have used the spectroscopic data of V1073 Cyg obtained by Ahn et al. (1992) for analysis. The analysis of radial velocity and light curves was made with Wilson} program (1998) and the geometric and physical elements} of the system were derived. By searching the simultaneous} solutions of the system, we have determined the masses and radii of the components: 1.64M⊙, 2.275R⊙ for the primary component and 0.55M⊙, 1.397R⊙ for the secondary component respectively. The effective temperature of 6494 ± 53 K for the secondary component was also estimated. 相似文献
10.
Since oil and gas are non-renewable resources, it is important to identify the extent to which they have been depleted. Such information will contribute to the formulation and evaluation of appropriate sustainable development policies. This paper provides an assessment of the changes in the availability of oil and gas resources in Malaysia by first compiling the physical balance sheet for the period 2000–2007, and then assessing the monetary balance sheets for the said resource by using the Net Present Value method. Our findings show serious reduction in the value of oil reserves from 2001 to 2005, due to changes in crude oil prices, and thereafter the depletion rates decreased. In the context of sustainable development planning, albeit in the weak sustainability sense, it will be important to ascertain if sufficient reinvestments of the estimated resource rents in related or alternative capitals are being attempted by Malaysia. For the study period, the cumulative resource rents were to the tune of RM61 billion. Through a depletion or resource rents policy, the estimated quantum may guide the identification of a reinvestment threshold (after considering needed capital investment for future development of the industry) in light of ensuring the future productive capacity of the economy at the time when the resource is exhausted. 相似文献