Three dimensional simulation of fluid flow in X‐ray CT images of porous media

A numerical scheme is developed in order to simulate fluid flow in three dimensional (3‐D) microstructures. The governing equations for steady incompressible flow are solved using the semi‐implicit method for pressure‐linked equations (SIMPLE) finite difference scheme within a non‐staggered grid system that represents the 3‐D microstructure. This system allows solving the governing equations using only one computational cell. The numerical scheme is verified through simulating fluid flow in idealized 3‐D microstructures with known closed form solutions for permeability. The numerical factors affecting the solution in terms of convergence and accuracy are also discussed. These factors include the resolution of the analysed microstructure and the truncation criterion. Fluid flow in 2‐D X‐ray computed tomography (CT) images of real porous media microstructure is also simulated using this numerical model. These real microstructures include field cores of asphalt mixes, laboratory linear kneading compactor (LKC) specimens, and laboratory Superpave gyratory compactor (SGC) specimens. The numerical results for the permeability of the real microstructures are compared with the results from closed form solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

Geochronology of the American-Antarctic Ridge

A new map of chrons for the American-Antarctic Ridge area has been compiled. Its analysis and the calculations performed showed that the seafloor spreading with respect to its axis started before 85 My B.P. The spreading directions were 115° (chrons C34-C29), 145° (chrons C29-C21), 110° (chrons C21-C5C), and 85° (chrons C5C-C1). The maximum rates of about 4 cm/year were reached earlier than 52 My B.P.; subsequently, a progressive general decrease in the spreading rate has been observed. According to our forecast, the spreading may cease in the following 3.5 My.     

Occurrence of Nummulitic coralline limestone from offshore Palar Basin,Bay of Bengal,India

Abstract

Palar basin is located between Pennar and Cauvery sedimentary basins of East coast of India in Bay of Bengal, northeast Indian Ocean. Sea floor drill (Wire-line Autonomous Coring System – WACS) with operational capability of up to 3000?m water depth was developed to collect long cores from deep sea floor for geotechnical and ocean resource assessment studies. During the drilling operation it encountered Nummulitic coralline limestone of Lower Eocene age at 18 meters below the seafloor (mbsf) at 850?m water depth indicating carbonated platform presence for the first time at the study region. Bathymetry contour from Naval Hydrography Chart and General Bathymetric Chart of the Oceans (GEBCO) has revealed the presence of shallow mounds from 50 to 200?m depth closure contour near the sampling site at 850?m water depth which might be a submerged carbonated structure. Since, Nummulites are shallow water dwelling fauna (<20?m depth) but its occurrence at 18 mbsf in 850?m water depth is recorded because of the advancement in technology tool for long core sampling by means of sea floor drill.     

A study on the polarimetric properties of various features using SIR-C data

Spaceborne Imaging Radar (SIR-C) data acquired over Gujarat, India in 1994 were processed and analysed using differnet techniques applicable to polarimetric SAR data such as polarization signatures, polarization index, decomposition of the signal and polarization phase difference and limited groundtruth data. It has been observed that multi-frequency polarimetric data enhances the potential of retrieving geo-physical parameters. The polarization signatures are found to vary with the nature of the target. Target decomposition of the returned signal will be useful for the classification of various features. Polarization Phase Difference (PPD) gives good information about the vegetation parameters.     

Use of Chemotaxonomy To Study the Influence of Benzalkonium Chloride on Bacterial Populations in Biodegradation Testing

Contradictory results are reported for the behaviour of quaternary ammonium compounds (QACs) in sewage treatment plants (STPs). QACs may sorb onto activated sludge. Only little information is available with respect to effects of QACs against bacteria in STPs. Only 5 to 15 % of bacteria present in sewage sludge can be detected by means of culture dependent microbiological methods. The shift of the bacterial populations due to effects of test compounds have not been studied up to now with culture independent methods. The microbial populations shift was studied in situ using culture independent chemotaxonomy profiling ubiquinones and polyamines. Additionally, toxic effects of QACs against bacteria present in the test vessels of the Zahn‐Wellens test (OECD 302 B) were assessed with a toxicity control in the test. The ubiquinone profiles representing changes in Gram‐negative populations mainly showed that the activated sludge was affected only in test vessels containing benzalkonium chloride. According to chemotaxonomy Acinetobacter or/and some members of Pseudomonas spp. have been selected by benzalkonium chloride after some adaptation period (8 to 12 days).     

A geomorphological approach to sustainable planning and management of the coastal zone of Kuwait

The coastal zone in Kuwait has been under a considerable pressure from conflicting land uses since the early 1960s, as well as from the destruction and oil pollution caused by the Gulf War. To avoid further damage and to protect the coastal heritage it is essential to adopt an environmentally sustainable management process. This paper shows how the study of coastal geomorphology can provide a sound basis for sustainable planning and management. Based on coastal landforms, sediments and processes, the coastline of Kuwait was divided into nine geomorphic zones. These zones were grouped into two main geomorphic provinces. The northern province is marked by extensive muddy intertidal flats and dominated by a depositional and low-energy environment. The southern geomorphic province is characterised by relatively steep beach profiles, rocky/sandy tidal flats and a moderate to high-energy environment. The study has demonstrated that pollution, benthic ecology and other environmental conditions of the coast are a function of coastline geomorphology, sedimentology and related processes. The geomorphological information was used to determine the coastal vulnerability and to assess the environmental impacts of development projects and other human activities. Several strategies were outlined to integrate the geomorphic approach into the management of the coastal resources.     

Present environment and historic changes from the record of lake sediments, Dhaka City, Bangladesh

Changes in the urban environment of Dhaka City have been evaluated from the geochemical compositions of bottom sediments from two lakes, Gulshan-1 and –2. Abundances of Pb, Zn, Fe₂O₃ and total sulfur in a Gulshan-1 core gradually increase toward the sediment–water interface. Three stages of condition change can be recognized in Gulshan-1, based on trace metal concentration patterns. The basal Stage I corresponds to background Dhaka sedimentation, whereas gradual increase in Stage II represents the beginning of pollution. Marked increases in Pb and Zn in Stage III reflect rapid urban development and increased emissions to the atmosphere. The condition of the Dhaka environment is compared to that of Japan based on Zn–Fe₂O₃ and Pb–Fe₂O₃ relations. Zn–Fe₂O₃ ratios in Stage I Dhaka sediments are similar to normal Japanese sediments, whereas Stage II data lie on the same trend as Japan urban sediments. Dhaka Stage III samples have greater Zn:Fe₂O₃ ratios than Japanese urban sediments, suggesting Zn pollution from poorly-controlled industrial sources. In contrast, the Dhaka Pb–Fe₂O₃ trend lies between normal and urban Japanese sediments. Although vehicle emissions in Dhaka are now significant, the data suggest that Pb pollution from this source remains in its early stages.     

Spatial pattern of variation in populations of Acacia nilotica in semi-arid environment

Variability among populations was analyzed in five provenances of Acacia nilotica from spatially variable habitats. Populations of A. nilotica developed in response to their habitat conditions. The level of variability was significantly high among the populations. Phenotypic variability was extremely high for leaf and stipular spine characteristics. The nature of morphological variability for vegetative traits appeared environmentally controlled. The differentiation of leaf and stipular spine expression seems to have an adaptive significance for the species in terms of water economy. Although, seed and pod characteristics are genetically controlled showing a lower proportion of variability but these traits supported r and k-selection that may allow the species to survive under a wide array of contrasting habitats. The study suggested that populations of A. nilotica are differentiated in relation to the heterogeneity of environment. These populations became adapted to their habitat through the variability of morphological expressions. The morphologically differentiated populations of the species had allowed them to maintain themselves in a wide array of environmental situations enabling A. nilotica to occupy ample ecological ranges.