Numerical manifold method for dynamic nonlinear analysis of saturated porous media

It is well known that the Babuska–Brezzi stability criterion or the Zienkiewicz–Taylor patch test precludes the use of the finite elements with the same low order of interpolation for displacement and pore pressure in the nearly incompressible and undrained cases, unless some stabilization techniques are introduced for dynamic analysis of saturated porous medium where coupling occurs between the displacement of solid skeleton and pore pressure. The numerical manifold method (NMM), where the interpolation of displacement and pressure can be determined independently in an element for the solution of u–p formulation, is derived based on triangular mesh for the requirement of high accurate calculations from practical applications in the dynamic analysis of saturated porous materials. The matrices of equilibrium equations for the second‐order displacement and the first‐order pressure manifold method are given in detail for program coding. By close comparison with widely used finite element method, the NMM presents good stability for the coupling problems, particularly in the nearly incompressible and undrained cases. Numerical examples are given to illustrate the validity and stability of the manifold element developed. Copyright © 2006 John Wiley & Sons, Ltd.     

A neural network approach to ship track-keeping control

This paper presents an on-line trained neural net work controller for ship track-keeping problems. Following a brief review of the ship track-keeping control development since the 1980's, an analysis of various existing backpropagation-based neural controllers is provided. We then propose a single-input multioutput (SIMO) neural control strategy for situations where the exact mathematical dynamics of the ship are not available. The aim of this study is to build an autonomous neural controller which uses rudder to regulate both the tracking error and heading error. During the whole control process, the proposed SIMO neural controller adapts itself on-line from a direct evaluation of the control accuracy, and hence the need for a “teacher” or an off-line training process can be removed. With a relatively modest amount of quantitative knowledge of the ship behavior, the design philosophy enables real time control of a nonlinear ship model under random wind disturbances and measurement noise. Three different track-keeping tasks have been simulated to demonstrate the effectiveness of the training method and the robust performance of the proposed neural control strategy     

广东省拖网网囊调查

为实施中华人民共和国国家标准《南海区拖网网囊最小网目尺寸》,对广东省范围内拖网网囊现状进行摸底调查,结果表明,广东省沿海拖网渔船现用网囊网目尺寸(内径)在16.7～35.2 mm范围内,总体平均为27 mm,均未能达到1989年国家技术监督局发布的中华人民共和国国家标准--《南海区拖网网囊最小网目尺寸》--内径39 mm.     

Effective collision strengths with inclusion of resonance for hyperfine-structure transitions in H- and Li-like ions

Calculations are made of the resonance contribution to electron-impact excitation of H-like ¹³C and Li-like ²³Na, ²⁵Mg, ²⁷Al and ²⁹Si to the upper hyperfine levels that produce millimetre (mm) lines of likely astrophysical interest. The resonance contribution is found to be very important for these Li-like ions, considerably more important than for Li-like ⁵⁷Fe considered previously. However, resonances are found to be rather unimportant for H-like ¹³C. The effect of radiative decay on the resonance contribution is found to be insignificant in all of the present calculations.     

图象的模型及其统计特性

本文对图象的统计特性及其适用模型作了分析。讨论了以前常用的平稳图象模型的缺陷,对实际图象的统计特性作了分析,认为它是非平稳的,不满足各态历经性,同时在空间上是高度相关的;讨论了相应的随机参数统计模型和描述性统计模型。指出作用于整幅图象的“全局”图象复原算法比每次只独立计算单个象元的“点”图象复原算法更为优越。     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.     

OQ208, a non-ideal VLBI calibrator of flux density

OQ208 is used ore and more frequently as a VLBI calibrator of flux density. A VLBI image of OQ208 at 5 GHz is firstly provided in this paper. Its structure consists of a compact core and a component. The angular distance between the core and the component is about 7 milli-arcsecond; the position angle is −125 degrees. In principle, OQ208 is not an ideal VLBI calibrator of flux density. This paper provides the structural information for correcting the structure effect when OQ208 is to be used as a calibrator.