Recent observations of meteotsunamis on the Finnish coast

We present four case studies of exceptional wave events of meteorological origin, observed on the Finnish coast in the summers of 2010 and 2011. Eyewitnesses report unusually rapid and strong sea-level variations (up to 1 m in 5–15 min) and strong oscillating currents during these events. High-resolution sea-level measurements confirm the eyewitness observations, but the oscillations recorded by tide gauges mostly have a considerably smaller amplitude. The oscillations coincide with sudden jumps in surface air pressure at coastal observation stations, related to the passage of squall lines or gust fronts. These fronts propagate above the sea at a resonant speed, allowing efficient energy transfer between the atmospheric disturbance and the sea wave that it generates. Thus, we interpret the observed sea-level oscillations as small meteotsunamis, long tsunami-like waves generated by meteorological processes and resonance effects.     

Modelling and Mapping Damage to Forests from an Ice Storm Using Remote Sensing and Environmental Data

An extreme ice storm in January 1998 deposited up to 100 mm of ice and resulted in significant forest damage across eastern North America. Average crown loss of over 75% was recorded in large areas of eastern Ontario and southern Quebec. A primary question that arose following the storm was: can forest damage be effectively assessed using remote sensing and other available environmental data? This paper presents two contrasting studies to address this question. The first involves damage modelling at a local scale in an unmanaged forest using spectral and spatial information in high-resolution airborne imagery. Results of field data analyses are also given that show relations between damage and forest structure and composition as well as changes in forest structure that occurred in the years following the storm. The second study involves regional scale damage mapping in managed and unmanaged forests of eastern Ontario using medium resolution satellite imagery and other environmental data. In comparison of several image classification and data interpolation methods, the best damage map was produced using a neural network classifier and a mix of Landsat and environmental data. The methods and results presented in this paper form the basis for ongoing long-term temporal study of damage impacts on forest condition.     

The selection of appropriate spectrally bright pseudo-invariant ground targets for use in empirical line calibration of SPOT satellite imagery

The appropriate utilization of multi-temporal SPOT multispectral satellite imagery in quantitative remote sensing studies requires the removal of atmospheric effects. One widely used and potentially very accurate way of achieving absolute atmospheric correction is the calibration of at-satellite radiance data to field measures of the surface reflectance factor (ρ_s). There are a number of variations in this technique, which are known collectively as empirical line (EL) approaches. However, the successful application of an EL spectral calibration requires the presence and careful selection of appropriate pseudo-invariant ground targets within each scene area. Real surfaces, even those that are man-made and vegetation-free, display non-Lambertian reflectance behaviour to some extent. Because of the ±31° off-nadir incidence angle range of the SPOT sensors, this is a crucial consideration. In favourable circumstances, it may be possible to utilize a goniometer to collect multiangular ρ_s measurements, but for widespread lower cost application of EL approaches currently, the use of a handheld spectrometer to measure nadir only ρ_s is a more realistic proposition. In either case, the selection of targets that have more limited and stable multiangular reflectance behaviour is preferable. Details are given of the reflectance properties of a variety of spectrally bright potential calibration surface types, encompassing sands, gravel, asphalts, and managed and artificial grass turf surfaces, measured in the field using the Finnish Geodetic Institute Field Goniospectrometer (FIGIFIGO). Bright calibration site selection requirements for SPOT data are discussed and the physical mechanisms behind the varying reflectance characteristics of the surfaces are considered. The most desirable properties for useful calibration targets are identified. The results of this study will assist other workers in the identification of likely suitable EL calibration sites for medium and high resolution optical satellite data, and therefore help optimize efforts in the time consuming and costly process of measuring ρ_s in the field.     

Nudging the Impasse? Lessons From the Nationwide Online Wolf Management Forum in Finland

During the early 2010s, Finnish wolf (Canis lupus) policy reached an impasse. Unfavorable conservation status, intensifying wolf–human conflict, civil disobedience, legislative confusion, and administrative frustration characterized the situation. As part of a participatory updating process for the Finnish national wolf management plan in 2014, we organized a nationwide wolf management forum to explore how e-participation could be used to nurture deliberation for improved wolf policy. We present our interactive method and the resulting wolf territory-based solutions to the wolf problems that the participants of a nationwide online forum identified. The theoretical and practical significance of our work is that we ascribe value to the functional features of these solutions as modifications to the action environment, shared by people and wolves. In this vein, we discuss the role of e-deliberation on the path toward an institutional fit, and we consider how local decision making could help to implement promising wolf territory-level policy interventions.     

An historical empirical line method for the retrieval of surface reflectance factor from multi-temporal SPOT HRV,HRVIR and HRG multispectral satellite imagery

SPOT satellites have been imaging Earth's surface since SPOT 1 was launched in 1986. It is argued that absolute atmospheric correction is a prerequisite for quantitative remote sensing. Areas where land cover changes are occurring rapidly are also often areas most lacking in situ data which would allow full use of radiative transfer models for reflectance factor retrieval (RFR). Consequently, this study details the proposed historical empirical line method (HELM) for RFR from multi-temporal SPOT imagery. HELM is designed for use in landscape level studies in circumstances where no detailed overpass concurrent atmospheric or meteorological data are available, but where there is field access to the research site(s) and a goniometer or spectrometer is available. SPOT data are complicated by the ±27° off-nadir cross track viewing. Calibration to nadir only surface reflectance factor (ρ_s) is denoted as HELM-1, whilst calibration to ρ_s modelling imagery illumination and view geometries is termed HELM-2. Comparisons of field measured ρ_s with those derived from HELM corrected SPOT imagery, covering Helsinki, Finland, and Taita Hills, Kenya, indicated HELM-1 RFR absolute accuracy was ±0.02ρ_s in the visible and near infrared (VIS/NIR) bands and ±0.03ρ_s in the shortwave infrared (SWIR), whilst HELM-2 performance was ±0.03ρ_s in the VIS/NIR and ±0.04ρ_s in the SWIR. This represented band specific relative errors of 10–15%. HELM-1 and HELM-2 RFR were significantly better than at-satellite reflectance (ρ_SAT), indicating HELM was effective in reducing atmospheric effects. However, neither HELM approach reduced variability in mean ρ_s between multi-temporal images, compared to ρ_SAT. HELM-1 calibration error is dependent on surface characteristics and scene illumination and view geometry. Based on multiangular ρ_s measurements of vegetation-free ground targets, calibration error was negligible in the forward scattering direction, even at maximum off-nadir view. However, error exceeds 0.02ρ_s where off-nadir viewing was ≥20° in the backscattering direction within ±55° azimuth of the principal plane. Overall, HELM-1 results were commensurate with an identified VIS/NIR 0.02ρ_s accuracy benchmark. HELM thus increases applicability of SPOT data to quantitative remote sensing studies.     

Dynamic modeling of forest conversion: Simulation of past and future scenarios of rural activities expansion in the fringes of the Xingu National Park,Brazilian Amazon

The present work is committed to simulate the expansion of agricultural and cattle raising activities within a watershed located in the fringes of the Xingu National Park, Brazilian Amazon. A spatially explicit dynamic model of land cover and land use change was used to provide both past and future scenarios of forest conversion into such rural activities, aiming to identify the role of driving forces of change in the study area. The employed modeling platform – Dinamica EGO – consists in a cellular automata environment that embodies neighborhood-based transition algorithms and spatial feedback approaches in a stochastic multi-step simulation framework. Biophysical variables and legal restrictions drove this simulation model, and statistical validation tests were then conducted for the generated past simulations (from 2000 to 2005), by means of multiple resolution fitting methods. Based on optimal calibration of past simulations, future scenarios were conceived, so as to figure out trends and spatial patterns of forest conversion in the study area for the year 2015. In all simulated scenarios, pasturelands remained nearly stable throughout the analyzed period, while a large expansion in croplands took place. The most optimistic scenario indicates that more than 50% of the natural forest will be replaced by either cropland or pastureland by 2015. This modeling experiment revealed the suitability of the adopted model to simulate processes of forest conversion. It also indicates its possible further applicability in generating simulations of deforestation for areas with expanding rural activities in the Amazon and in tropical forests worldwide.     

Economic risk maps of floods and earthquakes for European regions

Europe experiences different natural hazards and subsequent risks that have various effects on the development of its regions. The spatial significance of hazards can be expressed as an economic risk when combining hazard potential with vulnerability data. Two examples of European natural hazard maps on floods and earthquakes, as well as the resulting risk profiles of regions (combination of hazard potential and vulnerability) give a first impression on the spatial characters of hazards in Europe and their potential impact on further spatial development. The economic risk maps enable a view on the spatial dimension of the economic damage potential of flood and earthquakes, pointing out comparable situations across Europe with the aim to facilitate targeted responses and policies. The spatial character of a hazard is either defined by spatial effects that might occur in case of a disaster or by the possibility of spatial planning responses. The integration of the economic vulnerability of a region (regional GDP per capita, population density) leads to a classification of areas according to their economic risk or damage potential towards hazards. These synthetic risk profiles are presented as risk maps of European regions in administrative boundaries. Obtained information can be of interest for spatial planning and development strategies, e.g. economic risk profile of regions can influence the targets of investments and could thus be an important background for structural funding.     

Mapping Meaning: Critical Cartographies for Participatory Water Management in Taita Hills,Kenya

Participation of local people is often neglected in natural resource management, which leads to failure to understand the social aspects and historical construction of environmental problems. Participatory mapping can enhance the communication of local spatial knowledge for management processes and challenge the official maps and other spatial representations produced by state authorities and scientists. In this study, we analyze what kind of social meanings can be revealed through a multimethod participatory mapping process focusing on water resources in Taita Hills, Kenya. The participatory mapping clearly complicates the simplified image of the physical science mappings, typically depicting natural water supply, by addressing the impacts of contamination, inadequate infrastructure, poverty, distance to the sources, and restrictions in their uses on people's access to water. Moreover, this shared exercise is able to trigger discussion on issues that cannot always be localized but still contribute to place making. Local historical accounts reveal the social and political drivers of the current water-related problems, making explicit the political ecology dynamics in the area.     

Airborne remote sensing of spatiotemporal change (1955–2004) in indigenous and exotic forest cover in the Taita Hills,Kenya

We studied changes in area and species composition of six indigenous forest fragments in the Taita Hills, Kenya using 1955 and 1995 aerial photography with 2004 airborne digital camera mosaics. The study area is part of Eastern Arc Mountains, a global biodiversity hot spot that boasts an outstanding diversity of flora and fauna and a high level of endemism. While a total of 260 ha (50%) of indigenous tropical cloud forest was lost to agriculture and bushland between 1955 and 2004, large-scale planting of exotic pines, eucalyptus, grevillea, black wattle and cypress on barren land during the same period resulted in a balanced total forest area. In the Taita Hills, like in other Afrotropical forests, indigenous forest loss may adversely affect ecosystem services.