A time dependent model for spicule flow

A time dependent model for the flow of gas in a spicule is studied. In this model, the flow occurs in a magnetic flux sheath. Starting from hydrostatic equilibrium, the flux sheath is allowed to collapse normal to itself. The collapse induces a flow of gas along the magnetic field and this flow is identified as a spicule. A variety of sheath geometries and velocity patterns for the normal flow have been studied. It is observed that a large curvature in the field geometry and a large initial value for the normal flow are necessary to achieve spicule-like velocities. The duration for which a large velocity of normal flow is required is much shorter than the average lifetime of a spicule. It is proposed that the initial rapid collapse occurs during an impulsive spicule phase and it is the subsequent gradual relaxation of the flow which is observed as a spicule.     

Destroying hills in the northeastern part of Bangladesh: A qualitative assessment of extent of the problem and its probable impact

Indiscriminate cutting of hills in the Sylhet region has become a major environmental issue. The nature and life style of Sylhet intimately related with the hills are thus under the threat of a drastic imbalance in its ecosystem. Due to such hill cutting the mostly affected sectors of this region will be its weather and climate, geomorphology and hydrology, and the indigenous flora and fauna. As a result the frequency of natural calamities like earthquake, flash flooding etc may increase considerably. Deforestation and resulting increased soil erosion, decreased ground water recharge and deteriorated water quality might also be as consequences of such hill cutting. This paper investigates the cause and extent of the problem along with its probable impact and finally suggests actions for conservation of hills for ecological balance of the region.     

Morphological analysis of active Mount Nemrut stratovolcano, eastern Turkey: evidences and possible impact areas of future eruption

Mount Nemrut, an active stratovolcano in eastern Turkey, is a great danger for its vicinity. The volcano possesses a summit caldera which cuts the volcano into two stages, i.e. pre- and post-caldera. Wisps of smoke and hot springs are to be found within the caldera. Although the last recorded volcanic activity is known to have been in 1441, we consider here that the last eruption of Nemrut occurred more recently, probably just before 1597. The present active tectonic regime, historical eruptions, occurrence of mantle-derived magmatic gases and the fumarole and hot spring activities on the caldera floor make Nemrut Volcano a real danger for its vicinity. According to the volcanological past of Nemrut, the styles of expected eruptions are well-focused on two types: (1) occurrence of water within the caldera leads to phreatomagmatic (highly energetic) eruptions, subsequently followed by lava extrusions, and (2) effusions–extrusions (non-explosive or weakly energetic eruptions) on the flanks from fissures. To predict the impact area of future eruptions, a series of morphological analyses based on field observations, Digital Elevation Model and satellite images were realized. Twenty-two valleys (main transport pathways) were classified according to their importance, and the physical parameters related to the valleys were determined. The slope values in each point of the flanks and the Heim parameters H/L were calculated. In the light of morphological analysis the possible impact areas around the volcano and danger zones were proposed. The possible transport pathways of the products of expected volcanic events are unified in three main directions: Bitlis, Guroymak, Tatvan and Ahlat cities, the about 135 000 inhabitants of which could be threatened by future eruptions of this poorly known and unsurveyed volcano.     

Geologic and geotechnical effects of an impact caused by an airplane crash

A Turkish Airlines (THY) Boeing 737-400 plane crashed into alluvial soils creating an approximately 13 m deep and 30 m wide crater near the village of Adatepe, Ceyhan in southern Turkey. Effects of the impact on the soils in and around the crater were investigated from both the geological and soil mechanics point of view.

The results show that the impact caused severe deformations in the soils in and around the crater. The soils deformed similar to metamorphic rocks seen at many terrestrial hypervelocity impact craters around the world and became overconsolidated up to a distance of about 10 m from the crater wall as a result of the impact.

Also, the crash was recorded as a 2.7 magnitude earthquake by a nearby microtremor seismograph which provided both the location (epicenter) and time of the crash which was not known immediately after the crash.     

Geochemistry and mineralogy of shallow alluvial aquifers in Daudkandi upazila in the Meghna flood plain, Bangladesh

The shallow alluvial aquifers of the delta plains and flood plains of Bangladesh, comprises about 70% of total land area are mostly affected by elevated concentrations of arsenic (As) in groundwater exposing a population of more than 35 million to As toxicity. Geochemical studies of shallow alluvial aquifer in the Meghna flood plain show that the uppermost yellowish grey sediment is low in As (1.03 mg/kg) compared to the lower dark grey to black sediment (5.24 mg/kg) rich in mica and organic matter. Sequential extraction data show that solid phase As bound to poorly crystalline and amorphous metal (Fe, Mn, Al)-oxyhydroxides is dominant in the grey to dark grey sediment and reaches its maximum level (3.05 mg/kg) in the mica rich layers. Amount of As bound to sulphides and organic matter also peaks in the dark grey to black sediment. Vertical distributions of major elements determined by X-ray fluorescence (XRF) show that iron (Fe₂O₃), aluminum (Al₂O₃) and manganese (MnO) follow the general trend of distribution of As in the sediments. Concentrations of As, Mn, Fe, HCO₃ ⁻, SO₄ ²⁻ and NO₃ ⁻ in groundwater reflect the redox status of the aquifer and are consistent with solid phase geochemistry. Mineralogical analysis by X-ray diffraction (XRD) and scanning electron microscopy (SEM) fitted with energy dispersive X-ray spectrometer (EDS) revealed dominance of crystalline iron oxides and hydroxides like magnetite, hematite and goethite in the oxidised yellowish grey sediment. Amorphous Fe-oxyhydroxides identified as grain coating in the mica and organic matter rich sediment suggests weathering of biotite is playing a critical role as the source of Fe(III)-oxyhydroxides which in turn act as sink for As. Presence of authigenic pyrite in the dark grey sediment indicates active reduction in the aquifer.     

近14a也门降水异常的气候特征

利用1990-2003年也门7个测站降水资料,在分析近14 a也门降水季节变化特征的基础上,着重分析了也门夏季降水的年际变化特征。结果表明,也门降水异常的季节变化明显,异常在4-9月最大,尤其是7-9月,异常峰值所在月呈现出较明显的提早趋势;近14 a也门夏季降水呈现出增加的趋势,90年代末该趋势加大;近14 a也门夏季降水存在3 a和7 a左右的显著振荡周期。     

近14 a也门降水异常的气候特征

利用1990-2003年也门7个测站降水资料，在分析近148也门降水季节变化特征的基础上，着重分析了也门夏季降水的年际变化特征。结果表明，也门降水异常的季节变化明显，异常在4-9月最大，尤其是7-9月，异常峰值所在月呈现出较明显的提早趋势；近148也门夏季降水呈现出增加的趋势，90年代末该趋势加大；近148也门夏季降水存在38和78左右的显著振荡周期。     

Experimental Evaluation of Construction Waste and Ground Granulated Blast Furnace Slag as Alternative Soil Stabilisers

In this study, the effect of ground granulated blast furnace slag (GGBFS) and recycled construction waste (CW) on bentonite clay stabilisation were investigated. The unconfined compressive strength (UCS) of specimens was evaluated with different combinations of GGBFS and CW over various curing periods. A series of micro analysis tests consisting of scanning electron microscope, energy dispersive spectrometer and X-ray diffraction were also conducted to determine the microstructural arrangement and mineralogical effect of the stabilisation treatment. The UCS results showed an increment in strength after introduction of GGBFS and CW and the longer curing period produced more pronounced results. The optimum additive ratio was calculated as 5 % of slag and 20 % of construction waste under all curing conditions. The micro analytical results also indicated formation of structural bonds between admixtures and bentonite in stabilised specimens, as slag crystals and bentonite particles were observed to occupy the cavities and vesicles on the construction waste grains. However, the experimental data shows that the strength improvement is not significant with the addition of only construction waste.     

Evaluation of Subsurface Lithologic Units for Groundwater Exploration in the Barind Tract of Bangladesh

Barind Tract, located north western part of Bangladesh, is one of the most diversified physiographic units of the country. The surface water supply in this part is particularly limited, so the irrigation is almost entirely depends on groundwater. However, over exploitation indicates falling groundwater heads in this area. The objective of present study is to examine the nature of the aquifer system Barind Tract of Bangladesh in order to assess the sustainability of groundwater yield. Borehole lithology data were collected, processed and analyzed for this purpose. Representative panel diagram, 3-D stratigraphic and cross-sectional views were also prepared for necessary assessment of the variation of individual subsurface stratum in different locations. The study identified three subsurface geologic formations namely, a top clay layer, sand layer of different grain size and at the bottom an impermeable clay zone. Maps of formation thickness and index revealed that aquifer thickness is low in the north-western corner and in some places of middle of south-western corner. The thickness of sand formation in other places is recorded above 20 m. It is expect that the finding of the study will help groundwater resources development, planning and management in the area.     

Bi-cylindrical conformal map projection

Novel map projections can be derived by solving one of the two primary problems in mathematical cartography: direct and inverse. The combination of the equations of existing projections is a method that belongs to the direct problem category in mathematical cartography. As projections of different types, different classes, and different aspects can be combined, a considerable number of projections can be obtained by using this method. This paper aims to develop a novel projection by combining two conformal cylindrical projections with different aspects, namely normal and transverse, to reduce the distortions in map projection. It is observed that the resulting projection exhibits less distortion than those in normal and transverse cylindrical projections. Furthermore, the developed projection preserves conformality.