Beaver dam analogues drive heterogeneous groundwater–surface water interactions

Beaver dam analogues (BDAs) are a cost-effective stream restoration approach that leverages the recognized environmental benefits of natural beaver dams on channel stability and local hydrology. Although natural beaver dams are known to exert considerable influence on the hydrologic conditions of a stream system by mediating geomorphic processes, nutrient cycling, and groundwater–surface water interactions, the impacts of beaver-derived restoration methods on groundwater–surface water exchange are poorly characterized. To address this deficit, we monitored hyporheic exchange fluxes and streambed porewater biogeochemistry across a sequence of BDAs installed along a central Wyoming stream during the summer of 2019. Streambed fluxes were quantified by heat tracing methods and vertical hydraulic gradients. Biogeochemical activity was evaluated using major ion porewater chemistry and principal component analysis. Vertical fluxes of approximately 1.0 m/day were observed around the BDAs, as was the development of spatially heterogeneous zones of nitrate production, groundwater upwelling, and anaerobic reduction. Strong contrasts in hyporheic zone processes were observed across BDAs of differing sizes. This suggests that structures may function with size-dependent behaviour, only altering groundwater–surface water interactions after a threshold hydraulic step height is exceeded. Patterns of hyporheic exchange and biogeochemical cycling around the studied BDAs resemble those around natural beaver dams, suggesting that BDAs may provide comparable benefits to channel complexity and near-stream function over a 1-year period.     

Chaotic Diffusion And Effective Stability of Jupiter Trojans

It has recently been shown that Jupiter Trojans may exhibit chaotic behavior, a fact that has put in question their presumed long term stability. Previous numerical results suggest a slow dispersion of the Trojan swarms, but the extent of the ‘effective’ stability region in orbital elements space is still an open problem. In this paper, we tackle this problem by means of extensive numerical integrations. First, a set of 3,200 fictitious objects and 667 numbered Trojans is integrated for 4 Myrs and their Lyapunov time, T_L, is estimated. The ones following chaotic orbits are then integrated for 1 Gyr, or until they escape from the Trojan region. The results of these experiments are presented in the form of maps of T_Land the escape time, T_E, in the space of proper elements. An effective stability region for 1 Gyr is defined on these maps, in which chaotic orbits also exist. The distribution of the numbered Trojans follows closely the T_E=1 Gyr level curve, with 86% of the bodies lying inside and 14% outside the stability region. This result is confirmed by a 4.5 Gyr integration of the 246 chaotic numbered Trojans, which showed that 17% of the numbered Trojans are unstable over the age of the solar system. We show that the size distributions of the stable and unstable populations are nearly identical. Thus, the existence of unstable bodies should not be the result of a size-dependent transport mechanism but, rather, the result of chaotic diffusion. Finally, in the large chaotic region that surrounds the stability zone, a statistical correlation between T_LandT_E is found.     

Deuterium on Venus: Model comparisons with pioneer Venus observations of the predawn bulge ionosphere

A model of the predawn bulge ionosphere composition and structure is constructed and compared with the ion mass spectrometer measurements from the Pioneer Venus Orbiter during orbits 117 and 120. Particular emphasis is given to the identification of the mass-2 ion which we find unequivocally due to D⁺ (and not H₂⁺). The atmospheric D/H ratio of 1.4% and 2.5% is obtained at the homopause (～ 130 km) for the two orbits. The H₂⁺ contribution to the mass-2 ion density is less than 10%, and the H₂ mixing ratio must be <0.1 ppm at 130 km altitude. The He⁺ data require a downward He⁺ flux of ～2 × 10⁷ cm^?2 sec^?1 in the predawn region which suggest that the light ions also flow across the terminator from day to night along with the observed O⁺ ion flow.     

Peak metamorphic temperatures in type 6 ordinary chondrites: An evaluation of pyroxene and plagioclase geothermometry

Abstract— Quantifying the peak temperatures achieved during metamorphism is critical for understanding the thermal histories of ordinary chondrite parent bodies. Various geothermometers have been used to estimate equilibration temperatures for chondrites of the highest metamorphic grade (type 6), but results are inconsistent and span hundreds of degrees. Because different geothermometers and calibration models were used with different meteorites, it is unclear whether variations in peak temperatures represent actual ranges of metamorphic conditions within type 6 chondrites or differences in model calibrations. We addressed this problem by performing twopyroxene geothermometry, using QUILF95, on the same type 6 chondrites for which peak temperatures were estimated using the plagioclase geothermometer (Nakamuta and Motomura 1999). We also calculated temperatures for published pyroxene analyses from other type 6 H, L, and LL chondrites to determine the most representative peak metamorphic temperatures for ordinary chondrites. Pyroxenes record a narrow, overlapping range of temperatures in H6 (865–926 °C), L6 (812–934 °C), and LL6 (874–945 °C) chondrites. Plagioclase temperature estimates are 96–179 °C lower than pyroxenes in the same type 6 meteorites. Plagioclase estimates may not reflect peak metamorphic temperatures because chondrule glass probably recrystallized to plagioclase prior to reaching the metamorphic peak. The average temperature for H, L, and LL chondrites (～900 °C), which agrees with previously published oxygen isotope geothermometry, is at least 50 °C lower than the peak temperatures used in current asteroid thermal evolution models. This difference may require minor adjustments to thermal model calculations.     

Sedimentary development of the Louisiana continental shelf related to sea level cycles: Part II—seismic response

Cyclic sequences occur worldwide in nearly every stratigraphic sequence; they are particularly well-developed in fluvial and deltaic sediments that have been influenced by high-frequency eustatic sea-level fluctuations. The large data base for this study (including 471 deep foundation borings, thousands of line kilometers of high-resolution seismic, and sedimentological and dating analyses) represents the most complete information on high-resolution chronostratigraphy and lithostratigraphy that is available on any modern continental shelf/upper slope. These data are used to document sedimentological characteristics and high-resolution seismic responses during three complete sea-level cycles over the entire continental shelf/upper slope of offshore Louisiana. Examination of high-resolution seismic records indicates that well-defined, high-amplitude, laterally continuous reflectors correlate with rising and high stand condensed sedimentary sequences and that the deposits laid down during falling and low-stand periods (expanded sections) are characterized by a wide range of acoustic responses. Discontinuous reflectors with high-amplitude variability, continuous parallel reflectors, and chaotic and amorphous zones are common acoustic responses. The association between a particular lithofacies and a specific acoustic response on 3.5-kHz records was found to be very poor.     

Dissolved carbon and 33-133-133-1anomalies in the water column caused by hydrocarbon seeps on the northwestern Gulf of Mexico slope

Alkalinity, dissolved inorganic carbon (DIC), and ¹³C profiles from seep sites on the northwestern Gulf of Mexico upper slope show anomalously negative ¹³C values of up to –4.5 PDB, increased levels of DIC of up to 2.45 mmole/liter, and slight alkalinity rises of up to 2.54 meq/liter, relative to water column profiles from a seep-free site (0.63, 2.04 mmole/liter, and 2.39 meq/liter). The observed DIC enrichments coupled with the¹³C-depletions are attributed to the release of CO₂ by microbial oxidation of crude oil in the seep environment, and its migration into the water column. The ¹³C composition of the migrating CO₂ is estimated to be –26.0 on the basis of dissolved carbon inventory. Manifestation of DIC and ¹³C anomalies in the water column caused by hydrocarbon seepage holds promise to be useful for hydrocarbon reconnaissance surveys over large offshore tracts on account of the simplicity of sampling acquisition, and rapidity of analytical techniques in the laboratory.     

Advances in the fatigue assessment of wire ropes

This paper presents the findings from an in-depth analysis of the (axial) stiffness data recorded during tension–tension fatigue tests on wire ropes, particularly in relation to how changes in stiffness during testing relate to changes in rope strength. A linear relationship between stiffness and strength is shown to exist and a methodology presented for quantifying residual strength with applied cycles. New lower bound fatigue lines for six-strand rope and spiral strand are presented which are based on a 10% loss of strength. These new lines have the advantage of having been established using a common discard criterion for wire ropes.     

Phytoplankton and iron: validation of a global three-dimensional ocean biogeochemical model

The JGOFS program and NASA ocean-color satellites have provided a wealth of data that can be used to test and validate models of ocean biogeochemistry. A coupled three-dimensional general circulation, biogeochemical, and radiative model of the global oceans was validated using these in situ data sources and satellite data sets. Biogeochemical processes in the model were determined from the influences of circulation and turbulence dynamics, irradiance availability, and the interactions among four phytoplankton functional groups (diatoms, chlorophytes, cyanobacteria, and coccolithophores) and four nutrients (nitrate, ammonium, silica, and dissolved iron).Annual mean log-transformed dissolved iron concentrations in the model were statistically positively correlated on basin scale with observations (P<0.05) over the eight (out of 12) major oceanographic basins where data were available. The model tended to overestimate in situ observations, except in the Antarctic where a large underestimate occurred. Inadequate scavenging and excessive remineralization and/or regeneration were possible reasons for the overestimation.Basin scale model chlorophyll seasonal distributions were positively correlated with SeaWiFS chlorophyll in each of the 12 oceanographic basins (P<0.05). The global mean difference was 3.9% (model higher than SeaWiFS).The four phytoplankton groups were initialized as homogeneous and equal distributions throughout the model domain. After 26 years of simulation, they arrived at reasonable distributions throughout the global oceans: diatoms predominated high latitudes, coastal, and equatorial upwelling areas, cyanobacteria predominated the mid-ocean gyres, and chlorophytes and coccolithophores represented transitional assemblages. Seasonal patterns exhibited a range of relative responses: from a seasonal succession in the North Atlantic with coccolithophores replacing diatoms as the dominant group in mid-summer, to successional patterns with cyanobacteria replacing diatoms in mid-summer in the central North Pacific. Diatoms were associated with regions where nutrient availability was high. Cyanobacteria predominated in quiescent regions with low nutrients.While the overall patterns of phytoplankton functional group distributions exhibited broad qualitative agreement with in situ data, quantitative comparisons were mixed. Three of the four phytoplankton groups exhibited statistically significant correspondence across basins. Diatoms did not. Some basins exhibited excellent correspondence, while most showed moderate agreement, with two functional groups in agreement with data and the other two in disagreement. The results are encouraging for a first attempt at simulating functional groups in a global coupled three-dimensional model but many issues remain.