Readout Techniques for Drift and Low Frequency Noise Rejection in Infrared Arrays

Three different methods are presented to subtract thermal drifts and low-frequency noise from the signal of infrared array. The first is dead pixels with open Indium bumps, the second is reference output as implemented on the Hawaii2 multiplexer, and the third is dark pixels to emulate reference cells having a capacity connected to the gate of the unit cell field-effect transistor (FET). The third method is the most effective and yields a reduction in readout noise from15.4–9.4 erms. A novel method will be described to extend this readout technique to the Aladdin 1 K × 1 K InSb array. This revised version was published online in July 2006 with corrections to the Cover Date.     

Redetermination of the transformation enthalpies of the xanthoconite–proustite, pyrostilpnite–pyrargyrite and trechmannite–smithite phase transitions

 We report here refined values of the transformation enthalpy for xanthoconite to proustite (54.81 kJ/mol) and pyrostilpnite to pyrargyrite (40.32 kJ/mol). Additionally, the enthalpy for the transformation of trechmannite to smithite (5.82 kJ/mol) has been determined. The refinement was possible by taking into account a previously unknown dependence of electrochemical signals on the amount of substance undergoing the reduction process. Received December 21, 1995/Revised, accepted June 29, 1996     

Mise au point d'un milieu de culture pour l'étude de l'altération de silicates en présence de Pseudomonas aeruginosa

The influence of microorganisms on mineral alteration is not easy to determine in environmental conditions, because of the difficulty to raise for comparison purposes an identical but abiotic system. Another problem in this context is the choice of reliable tracers to evaluate the alteration rate of materials during in vitro experiments. To face such difficulties, we elaborated a defined medium allowing both the growth of Pseudomonas aeruginosa and a precise measurement of the elements solubilized from the minerals. Thanks to this medium, we were able to quantitatively determine the amounts of major elements solubilized from the materials in the presence of bacterial growth, compared to a sterile system. Moreover, the analysis by ICP-MS of trace elements was possible after a chromatographic treatment, which selectively eliminated 99% of the sodium content of the medium. To cite this article: G. Aouad et al., C. R. Geoscience 337 (2005).     

Relative timing of deformation and two-stage gold mineralization at the Hutti Mine, Dharwar Craton, India

Gold mineralization at Hutti is confined to a series of nine parallel, N–S to NNW–SSE trending, steeply dipping shear zones. The host rocks are amphibolites and meta-rhyolites metamorphosed at peak conditions of 660±40°C and 4±1 kbar. They are weakly foliated (S₁) and contain barren quartz extension veins. The auriferous shear zones (reefs) are typically characterized by four alteration assemblages and laminated quartz veins, which, in places, occupy the entire reef width of 2–10 m, and contain the bulk of gold mineralization. A <1.5 m wide distal chlorite-sericite (+biotite, calcite, plagioclase) alteration zone can be distinguished from a 3–5 m wide proximal biotite-plagioclase (+quartz, muscovite, calcite) alteration zone. Gold is both spatially and temporally associated with disseminated arsenopyrite and pyrite mineralization. An inner chlorite-K-feldspar (+quartz, calcite, scheelite, tourmaline, sphene, epidote, sericite) alteration halo, which rims the laminated quartz veins, is characterized by a pyrrhotite, chalcopyrite, sphalerite, ilmenite, rutile, and gold paragenesis. The distal chlorite-sericite and proximal biotite-plagioclase alteration assemblages are developed in microlithons of the S₂–S₃ crenulation cleavage and are replaced along S₃ by the inner chlorite-K-feldspar alteration, indicating a two-stage evolution for gold mineralization. Ductile D₂ shearing, alteration, and gold mineralization formed the reefs during retrograde evolution and fluid infiltration under upper greenschist to lower amphibolite facies conditions (560±60°C, 2±1 kbar). The reefs were reactivated in the D₃ dextral strike-slip to oblique-slip environment by fault-valve behavior at lower greenschist facies conditions (ca. 300–350°C), which formed the auriferous laminated quartz veins. Later D₄ crosscutting veins and D₅ faults overprint the gold mineralization. The alteration mineralogy and the structural control of the deposit clearly points to an orogenic style of gold mineralization, which took place either during isobaric cooling or at different levels of the Archean crust. From overlaps in the tectono-metamorphic history, it is concluded that gold mineralization occurred during two tectonic events, affecting the eastern Dharwar craton in south India between ca. 2550 – 2530 Ma: (1) The assemblage of various terranes of the eastern block, and (2) a tectono-magmatic event, which caused late- to posttectonic plutonism and a thermal perturbation. It differs, however, from the pre-peak metamorphic gold mineralization at Kolar and the single-stage mineralization at Ramagiri. Notably, greenschist facies gold mineralization occurred at Hutti 35–90 million years later than in the western Dharwar craton. Editorial handling: G. Beaudoin     

The relation of Holocene fluvial terraces to changes in climate and sediment supply,South Fork Payette River,Idaho

Well-preserved Holocene terraces along the South Fork Payette River in central Idaho provide a record of fluvial system behavior in a steep mountain watershed characterized by weathered and erodible Idaho Batholith granitic rocks. Terrace deposit ages were provided by ¹⁴C dating of charcoal fragments and optically stimulated luminescence (OSL) dating of sandy sediments. Along with pairing of many terrace tread heights, these data indicate episodic downcutting during the Holocene, with a mean incision rate of ～0.9 m/ka from ～7 ka to present. Prior to 7 ka, the river incised to within～3 m of current bankfull, but then aggraded by ～5 m over at least a ～10 km-long reach in an episode centered ～7–6 ka. Aggradation may relate to (1) increased hillslope sediment input from landslides and debris flows in steep tributary basins with abundant grussified granitic bedrock, (2) possible local landslide-damming of the channel, (3) decreased peak discharge, or (4) a combination of these factors. Middle Holocene channel aggradation ca. 7–6 ka corresponds with a period of prolonged and widespread aridity in the northern Rocky Mountains. Between ～5 and 1.3 ka, the river aggraded slightly and then remained stable, forming a prominent terrace tread at ～3 m above current bankfull. Modest aggradation to vertical stability of the South Fork Payette River at the 1.5 m terrace level ～1.0–0.7 ka corresponds with large fire-related debris flows in tributaries during Medieval droughts. Three intervals of incision (～5.5–5 ka, 1.3–1.0 ka and 0.5 ka) correspond with frequent but small fire-related sedimentation events and generally cooler, wetter conditions suggesting increased snowmelt runoff discharges. Other possible drivers of channel incision include an increase in stochastic or climate-modulated large storms and floods and a reduction in delivery of hillslope sediment to the channel. Aggradation is more confidently tied to climate through increases in hillslope sediment delivery and (or) decreased stream power, both likely related to warmer, drier conditions (including high-severity fires) that reduce snowmelt and decrease vegetation cover on steep slopes. Thus, the Holocene terraces of the South Fork Payette River do not reflect simple stepwise incision with periods of vertical stability and lateral migration, but record substantial episodes of aggradation as well. We infer that increases in hillslope erosion and mass movements combined with reduced discharges during prolonged droughts episodically reverse the post-glacial trend of downcutting, in particular during the middle Holocene. The present bedrock-dominated channel implies a strong tendency toward incision in the late Holocene.     

GPS for real-time earthquake source determination and tsunami warning systems

We identify the key design aspects of a GPS-based system (and in the future, GNSS-based systems) that could contribute to real-time earthquake source determination and tsunami warning systems. Our approach is based on models of both transient and permanent displacement of GPS stations caused by large earthquakes, while considering the effect of GPS errors on inverted earthquake source parameters. Our main conclusions are that (1) the spatial pattern, magnitude, and timing of permanent displacement of GPS stations can be inverted for the earthquake source and so predict the 3D displacement field of the ocean bottom, thus providing the initial conditions for tsunami models, and (2) there are no inherently limiting factors arising from real-time orbit and positioning errors, provided sufficient near-field GPS stations are deployed. This signal could be readily exploited by GPS networks currently in place, and will be facilitated by the IGS Real-Time Project as it comes to fruition.     

Cycle anatomy and variability in the storm-dominated type cincinnatian (Upper Ordovician): coming to grips with cycle delineation and genesis

Although parasequence and sequence are scale-independent terms, they are frequently applied only to specific scales of cycles. For example, meter-scale cycles are commonly assumed to be parasequences or PACs. In the Upper Ordovician Kope and Fairview Formations of northern Kentucky, we examined a succession of 50 meter-scale cycles that have been variously interpreted as deepening-upward, shallowing-upward, or showing no relationship with water depth. Our analysis shows that these cycles, characterized by shifts in storm-bed proximality, are highly variable in their thickness and internal construction. Most cycles are best considered high-frequency sequences, because deepening-upward intervals are common, and many cycles contain evidence of abrupt basinward shifts in facies as expected at sequence boundaries. A minority fit the parasequence model of shallowing-upward cycles bounded by flooding surfaces. Larger, 20 m scale cycles are defined by systematic thickening and thinning trends of meter-scale cycles. However, meter-scale cycles do not display any systematic trends in cycle anatomy as a function of position within the 20 m cycles or position within the Kope and Fairview Formations. The high cycle variability and the lack of systematic stratigraphic organization with respect to longer-term cyclicity reflect either the irregularity of relative sea-level changes, the poor recording of sea-level changes in this deep-water setting, or the generation of these cycles by climate-induced cyclicity in storm intensity. These three mechanisms would generate similar patterns at the outcrop scale, so it is not possible at the present to distinguish between them.     

Cumulate gabbros from the Southwest Indian Ridge, 54°S-7° 16′ E: implications for magmatic processes at a slow spreading ridge

A diverse volcanic and plutonic rock suite was recovered from the center of the 80 km long ridge segment of the Southwest Indian Ridge (54°S, 7°16 E) between the Islas Orcadas and Shaka Fracture Zones. The cumulus nature of the gabbroic rocks in the suite is indicated by phase, modal and cryptic layering, igneous lamination, and low incompatible element abundances. We present a mass-balance model for calculating the proportions and compositions of cumulus phases and crystallized intercumulus liquid from bulk-rock major element compositions. The model is based on the ability to define a compositional array of basaltic liquids and on the assumption that cumulus minerals are initially in equilibrium with trapped liquid. Calculated proportions of trapped liquid range from 3%–15%; values that are characteristic of adcumulates to mesocumulates. Models of postcumulus crystallization indicate significant enrichments of incompatible elements and buffering of compatible elements in residual trapped liquids, thus explaining the high TiO₂ contents observed in magnesian clinopyroxenes. Cumulus phase assemblages and compositions suggest solidification in shallow level magma chambers, but disequilibrium plagioclase compositions suggest some crystallization at greater depth. Furthermore, basalt compositions projected onto the olivine-clinopyroxenequartz pseudoternary suggest magma generation over a range of pressures (from less than 10 to greater than 20 kb) as well as polybaric fractional crystallization. We suggest that the Southwest Indian Ridge is characterized by low magma supply with small batches of melt that either ascend directly to the surface having undergone limited polybaric crystallization or are trapped in shallow crustal magma chambers where they evolve and solidify to form cumulate gabbros. The adcumulus nature of the gabbros investigated here suggests slow cooling rates typical of large intrusions implying relatively large, but ephemeral magma chambers below segments of the Southwest Indian Ridge.     

Preface: Proceedings of the 5th International Symposium on Lithographic Limestone and Plattenkalk

Magmatic rocks from the pre-Mesozoic basements of the Sambuco and Maggia nappes have been dated by U–Pb zircon ages with the LA-ICPMS technique. Several magmatic events have been identified in the Sambuco nappe. The mafic banded calc-alkaline suite of Scheggia is dated at 540 Ma, an age comparable to that of mafic rocks in the Austroalpine Silvretta nappe. The Sasso Nero peraluminous augengneiss has an age of 480–470 Ma, like many other “older orthogneisses” in Alpine basement units. It hosts a large proportion of inherited zircons, which were dated around 630 Ma, a Panafrican age indicating the Gondwanan affiliation of the Sambuco basement. The calc-alkaline Matorello pluton yielded ages around 300 Ma, similar to numerous Late Carboniferous intrusions in other basement units of the Lower Penninic (Monte Leone, Antigorio, Verampio) and Helvetic domains (Gotthard and other External Crystalline Massifs). Associated lamprophyric dykes are slightly younger (300–290 Ma), like similar dykes sampled in gneiss blocks included in the sedimentary cover of the underlying Antigorio nappe (290–285 Ma). The Cocco granodiorite and Rüscada leucogranite, both intruding the basement of the neighbouring Maggia nappe, yielded ages of ca. 300–310 Ma, identical within errors to the age of the Matorello pluton. They are significantly older than former age determinations. This age coincidence, coupled with remarkable petrologic similarities between the Cocco and Matorello granodiorites, strongly suggests paleogeographic proximity of the Sambuco and Maggia nappes in Late Carboniferous times. In recent publications these two nappes have been interpreted as belonging to distinct Mesozoic paleogeographic domains: “European” for Sambuco and “Briançonnais” for Maggia, separated by the “Valais” oceanic basin. In this case, the similarity of the Matorello and Cocco intrusions would demonstrate the absence of any significant transcurrent movement between these two continental domains. Alternatively, according to a more traditional view, Sambuco and Maggia might belong to a single large Alpine tectonic unit.