Sediment-activation depth values for gentle and steep beaches

This paper analyzes methods and terminologies used in literature for the determination and characterization of vertical distribution of sediment-activation depth, which is bottom sediment layer affected by hydrodynamic processes. Studies on this topic include assessments carried out during short time spans, from minutes to few hours or longer periods, from a tidal cycle to several days. In the first case, activation is generally named “mixing depth” and is calculated by evaluating vertical distribution of fluorescent tracers. In the second case, it is referred to as “disturbance depth” and is generally evaluated using plugs of marked sand and rods, or rods with a loose-fitting washer. Vertical cross and longshore distribution of mixing and disturbance depth values, recorded in different works with different techniques, were also analyzed highlighting the conceptual differences between used methods and obtained results. In a further step, a data set from literature on this topic was gathered to obtain new formulations between disturbance depth and beach and wave characteristics as well as morphodynamic beach state, expressed throughout the surf scaling parameter and the surf similarity index. Good linear regressions were observed between these variables, obtaining expressions that can be easily used in a wide range of beach states, from dissipative and intermediate to reflective ones.     

A real-time spectrum analyser with on-line definition of the confidence levels

This paper describes a real-time spectrum analyser with on-line definition of the confidence levels built at Trieste Observatory for a research program on periodical components of unknown period in optical sources. The system is realized by a photon counting photometer on-line to a computer that elaborates in real-time the data from the photometer and displays the spectrum of the source measured. The spectrum is normalized to unity mean value and the display is calibrated by the confidence levels relative to the distribution of the spectrum displayed. Some experimental data show the performance of the machine that operates in real-time at full efficiency up to 160 Hz. Work supported by Consiglio Nazionale delle Ricerche, Gruppo Nazionale di Astronomia, Settore Tecnologie Astronomiche. Trieste Observatory — Instruments and Data Processing Group (1/76).     

Crustal and mantle strengths in continental lithosphere: is the jelly sandwich model obsolete?

The relative importance of the contribution of the lower crust and of the lithospheric mantle to the total strength of the continental lithosphere is assessed systematically for realistic ranges of layer thickness, composition, and temperature. Results are presented as relative strength maps, giving the ratio of the lower crust to upper mantle contribution in terms of crustal thickness and surface heat flow. The lithosphere shows a “jelly sandwich” rheological layering for low surface heat flow, thin to average crustal thickness, and felsic or wet mafic lower crustal compositions. On the other hand, most of the total strength resides in the seismogenic crust in regions of high surface heat flow, crust of any thickness, and dry mafic lower crustal composition.     

Gentrification as space domestication. The High Line Art case

In this paper, we critically examine the role of artistic locational choices and practices in the context of gentrification processes in urban renewal contexts. We characterize gentrification as a form of domestication of space, and explore the extent to which artistic choices and practices relate to such process with reference to the deontological dilemma of legitimization within the art system vs. responsible empowerment of vulnerable local constituencies. We illustrate our argument with an analysis of the High Line Art project, and show how this can be considered as a textbook example of art-driven space domestication leading to brutal forms of gentrification. We comment on the threat that this provides to the social credibility of artistic practices as an agency of responsible social change.     

Prototype measurements and small-scale model tests of wave overtopping at shallow rubble-mound breakwaters: the Ostia-Rome yacht harbour case

The paper presents the comparison between the results of small-scale model tests and prototype measurements of wave overtopping at a rubble-mound breakwater. The specific structure investigated is the west breakwater of the yacht harbour of Rome at Ostia (Italy) and is characterized by a gentle seaward slope (1/4) and by a long, shallow foreshore. The laboratory tests firstly aimed at carefully reproducing two measured storms in which overtopping occurred and was measured. The tests have been carried out in two independent laboratories, in a wave flume and in a wave basin, hence using a two-dimensional (2-D) and a three-dimensional (3-D) setup. In the 2-D laboratory tests no overtopping occurred during the storm reproductions; in the 3-D case discharges five to ten times smaller than those observed in prototype have been measured. This indicates the existence of model and scale effects. These effects have been discussed on the basis of the results of several parametric tests, which have been carried out in both laboratories, in addition to the storm reproductions, varying wave and water level characteristics. Final comparison of all the performed tests with 86 prototype measurements still suggests the existence of scale and model effects that induce strong underestimation of overtopping discharge at small scale. The scale reproduction of wave breaking on the foreshore, together with the 3-D features of the prototype conditions and the absence of wind stress in the laboratory measurements, have been individuated as the main sources of scale and model effects. The paper also provides a comparison between the data and a largely used formula for wave overtopping discharges in the presence of structures similar to the one at hand. The suitable value of a roughness factor that appears in that formula is investigated and good agreement is found with other recent researches on rubble-mound breakwaters.     

The mafic-ultramafic complex near Finero (Ivrea-Verbano Zone), I. Chemistry of MORB-like magmas

Geochemical data are presented for the meta-igneous, mafic-ultramafic complex near Finero. This complex is in contact with a phlogopite-bearing mantle peridotite and is subdivided into the Internal Gabbro unit, the Amphibole Peridotite unit, and the External Gabbro unit. The Internal Gabbro and the Amphibole Peridotite units consist of coarse-grained, chemically heterogeneous cumulates, whereas the External Gabbro unit is generally massive, chemically more uniform and approximately representative of the residual melt with MgO contents between 6.6 and 9.1% and Mg numbers between 38 and 58. Both whole-rock and mineral contents of Ni and Cr are significantly higher (at similar Mg numbers) in the Amphibole Peridotite unit than in the Internal Gabbro unit. The most straightforward interpretation of this is that the Amphibole Peridotite unit accumulated after the influx of fresh mafic (or ultramafic) magma into the magma chamber. Major-element chemical trends are continuous from the Amphibole Peridotite unit to the External Gabbro unit and are consistent with closed-system fractionation with no further addition of magma or contamination by wall or roof rock assimilation. In the External Gabbro unit, total FeO and TiO₂ contents are strongly correlated with each other (and with P₂O₅ and Zr) and reach values as high as 19 and 4%, respectively, indicating an advanced degree of crystal fractionation along a tholeftic trend. The External Gabbro samples have generally smooth normalized trace element patterns, which are consistent with being representative of a liquid composition. The residual nature of the External Gabbro magma is also indicated by negative Eu and Sr anomalies, clear evidence for prior feldspar fractionation. REE patterns are otherwise indistinguishable from N-type MORB, but Th and U are significantly more depleted than in MORB. This Th and U depletion is similar to that found in olivine basalts and picrites on Iceland and Hawaii; its origin is not well understood. No evidence is seen for any assimilation of crystal material, in sharp contrast with the situation of the igneous complex in Val Sesia near Balmuccia, where the magma composition is dominated by assimilation of crust. We suggest that the heat provided by at most two injections of magma near Finero was insufficient to induce crystal anatexis, in contrast with the excess heat supplied by multiple magma injections at Balmuccia.     

Mineralogy, composition and PGM of chromitites from Pefki, Pindos ophiolite complex (NW Greece): evidence for progressively elevated fAs conditions in the upper mantle sequence

The Pindos ophiolite complex, located in the northwestern part of continental Greece, hosts various chromite deposits of both metallurgical (high-Cr) and refractory (high-Al) type. The Pefki chromitites are banded and sub-concordant to the surrounding serpentinized dunites. The Cr# [Cr/(Cr?+?Al)] of magnesiochromite varies between 0.75 and 0.79. The total PGE grade ranges from 105.9 up to 300.0?ppb. IPGE are higher than PPGE, typical of mantle hosted ophiolitic chromitites. The PGM assemblage in chromitites comprises anduoite, ruarsite, laurite, irarsite, sperrylite, hollingworthite, Os-Ru-Ir alloys including osmium and rutheniridosmine, Ru-bearing oxides, braggite, paolovite, platarsite, cooperite, vysotskite, and palladodymite. Iridarsenite and omeiite were also observed as exsolutions in other PGM. Rare electrum and native Ag are recovered in concentrates. This PGM assemblage is of great petrogenetic importance because it is significantly different from that commonly observed in podiform mantle-hosted and banded crustal-hosted ophiolitic chromitites. PGE chalcogenides of As and S are primary, and possibly crystallized directly from a progressively enriched in As boninitic melt before or during magnesiochromite precipitation. The presence of Ru-bearing oxides implies simultaneous desulfurization and dearsenication processes. Chemically zoned laurite and composite paolovite-electrum intergrowths are indicative of the relatively high mobility of certain PGE at low temperatures under locally oxidizing conditions. The PGM assemblage and chemistry, in conjunction with geological and petrologic data of the studied chromitites, indicate that it is characteristic of chromitites found within or close to the petrologic Moho. Furthermore, the strikingly different PGM assemblages between the high-Cr chromitites within the Pindos massif is suggestive of non-homogeneous group of ores.     

Mineralogical and geochemical investigation of layered chromitites from the Bracco–Gabbro complex, Ligurian ophiolite, Italy

The Bracco–Gabbro Complex (Internal Liguride ophiolite), that intruded subcontinental mantle peridotite, contains layers of chromitite that are associated with ultramafic differentiates. The chromitites and disseminated chromites in the ultramafics have Al contents similar to the Al-rich podiform chromitites [0.40 < Cr# = Cr/(Cr + Al) < 0.55]. TiO₂ contents of the chromitites are unusually high and range up to 0.82 wt%. The calculated Al₂O₃ and TiO₂ content of the parental melt suggest that the melt was a MORB type. Geothermobarometrical calculations on few preserved silicate inclusions revealed formation temperatures between 970 and 820 °C under a relatively high oxygen fugacity (ΔlogfO₂ at +2.0–2.4). Chromitites were altered during the post-magmatic tectono-metamorphic uplift and the final exposure at the seafloor, as evidenced by the formation of ferrian chromite. The PGE contents of the chromitites and associated ultramafics are unusually low (PGEmax 83 ppb). The chondrite-normalized PGE spidergrams show positive PGE patterns and to some extent similarities with the typical trend of stratiform chromitites. No specific PGM have been found but low concentrations of PPGE (Rh, Pt, and Pd) have been detected in the sulphides that occur interstitially to or enclosed in chromite. Recently, it has been shown that the Internal Liguride gabbroic intrusions have formed by relatively low degrees of partial melting of the asthenospheric mantle. We conclude that the low degree of partial melting might be the main factor to control the unusual low PGE contents and the rather unique PGE distribution in the Bracco chromitites.     

Beating words to life: subtitles,assemblage(s)capes,expression

Ostensibly, subtitles in films serve as linguistic approximations of meaning. Expectedly then, much of the debate surrounding subtitling has been concerned with representational accuracy, fidelity and authenticity. In this article I argue that by encountering subtitles as affective bodily expressions, as opposed to approximate representations of pre-existent meanings or intentions, filmic experiences may be(come) transformed and differently transformational. As a result, meaning and accuracy in subtitles as superimposed signifiers or static representations become secondary to subtitles as spatially affective- and expressive-movements intimately part of filmic scapes. The creative use of subtitling in Bekmambetov’s Russian language film Night Watch (Nochnoy dozor; 2006 [2004]) is discussed.

Petrology of Al- and Cr-rich ophiolitic chromitites from the Muğla,SW Turkey: implications from composition of chromite,solid inclusions of platinum-group mineral,silicate, and base-metal mineral,and Os-isotope geochemistry

Ultramafic rocks around the city of Muğla in SW Turkey are represented by mantle peridotites depleted to various degrees, ranging from cpx-rich harzburgites to depleted harzburgite and dunite. Cpx-rich harzburgites are thought to be the residua left after extraction of MORB-type basalt, from which high-Al chromitite [49.2 < Cr# = 100 × Cr/(Cr + Al) < 53.5] crystallised with a higher proportion of ¹⁸⁷Os/¹⁸⁸Os (average of 0.1361). However, depleted harzburgites are assumed to be the residua left after extraction of hydrous boninitic melt produced by second stage partial melting of already depleted mantle due to a subducting slab, from which high-Cr chromitites (64.2 < Cr# < 85.9) with lower and heterogeneous ¹⁸⁷Os/¹⁸⁸Os ratio (average of 0.1324) were crystallised as a result of melt–rock interaction in a supra-subduction environment. Dunites around the chromite deposits are considered to be the product of melt–peridotite interaction. Most of the chromitites contain high-Cr chromite and display enrichment in IPGE (Os, Ir, Ru) over PPGE (Rh, Pt, Pd), with PGE concentrations between 61 and 1,305 ppb. Consistently, laurite-erlichmanite series minerals with various Os concentrations are found to be the most abundant PGM inclusions in chromite. Os–Ir–Ru alloy, irarsite, and kashinite, as well as Pt–Fe alloy and Pt-oxide, which are not common in ophiolitic chromitites, were also detected as magmatic PGM inclusions. Pentlandite, millerite, and, rarely heazlewoodite form the magmatic inclusions of base-metal sulphide. The presence of olivine and clinopyroxene, as well as hydrous silicate inclusions such as amphibole and phlogopite, in high-Cr chromitite supports the idea that high-Cr chromitites were formed in a supra-subduction environment.