Threat from above! Assessing the risk from the Tonghua high-locality landslide in Sichuan,China

Landslides - In tectonically active steep mountain belts, such as those in west Sichuan in China, frequent landslide disasters can occur during the rainy season. High-locality landslides often...     

Failure mechanism and kinematics of the deadly June 24th 2017 Xinmo landslide,Maoxian, Sichuan,China

At 5:38 am on the 24th June, 2017, a catastrophic rock avalanche destroyed the whole village of Xinmo, in Maoxian County, Sichuan Province, China. About 4.3 million m³ of rock detached from the crest of the mountain, gained momentum along a steep hillslope, entrained a large amount of pre-existing deposits, and hit the village at a velocity of 250 km/h. The impact produced a seismic shaking of ML = 2.3 magnitude. The sliding mass dammed the Songping gully with an accumulation body of 13 million m³. The avalanche buried 64 houses; 10 people were killed and 73 were reported missing. The event raised great concerns both in China and worldwide. Extensive field investigation, satellite remote sensing, UAV aerial photography, and seismic analysis allowed to identify the main kinematic features, the dynamic process, and the triggering mechanism of the event. With the aid of ground-based synthetic aperture radar monitoring, the hazard deriving from potential further instabilities in the source area has been assessed. The preliminary results suggest that the landslide was triggered by the failure of a rock mass, which had been already weakened by the M_s 7.5 Diexi earthquake in 1933. Several major earthquakes since then, and the long-term effect of gravity and rainfall, contributed to the mass failure. The high elevation, slope angle, and vegetation cover in the source area hinder geological field investigation and make hazard assessment difficult. Nonetheless, monitoring and prevention of similar collapses in mountainous areas must be carried out to protect human lives and infrastructures. To this aim, the integrated use of modern high-precision observation technologies is strongly encouraged.     

Zambales ophiolite,Philippines

The Acoje massif is part of a mafic-ultramafic complex, the Zambales ophiolite, and is a fragment of Mesozoic oceanic crust. This paper documents the occurrence and phase relations of sulfides and associated phases in the critical zone of the Acoje massif. The Acoje critical zone (ACZ) forms the basal cumulate sequence of the massif and consists of a variably serpentinized lower ultramafic zone and a relatively less altered upper mafic zone. Two distinct sulfide associations have been identified: (1) a troilite (±pyrrhotite)-dominated group hosted by the mafic zone and (2) a pentlandite-dominated group hosted by the ultramafic zone. Troilite-dominated assemblages represent the original mineralogy of magmatically precipitated sulfides in the entire cumulate sequence. The pentlandite-dominated group appears to have evolved from the primary magmatic sulfides during low-temperature re-equilibration. The paragenetic evolution from the magmatic assemblage to the low-temperature assemblage appears to have proceeded as follows: (1) S-rich hexagonal pyrrhotite+pentlandite+chalcopyrite (or cubanite)+magnetite, (2) S-poor hexagonal pyrrhotite+pentlandite+intermediate solid solution (iss) phase (and/or cubanite)+magnetite, (3) troilite (or mackinawite)+pentlandite+iss+magnetite, (4) troilite (or mackinawite)+pentlandite+iss+native Cu+magnetite, (5) pentlandite+native Cu+magnetite, and (6) pentlandite+native Cu+Fe-Ni alloy+magnetite. This evolutionary trend, in conjunction with the observed textural, chemical, and sulfur-isotopic relations, indicates that the native metal and alloy phases in the ACZ were produced by low-temperature reduction of the primary magmatic sulfides. Correlations between sulfide assemblages and coexisting silicate-hydrosilicate-oxide assemblages further indicate that this alteration occurred during retrograde serpentinization of the Acoje massif. Two end-member models that could explain the inferred low-temperature mineralogic evolution of the ACZ sulfides are described: (1) an isothermal reduction model and (2) a non-isothermal equilibration model. Both isothermal and non-isothermal effects apparently were involved in the development of variably reduced sulfide-oxide-metal assemblages from the initial magmatic sulfides.     

Some considerations on the use of numerical methods to simulate past landslides and possible new failures: the case of the recent Xinmo landslide (Sichuan,China)

Rock avalanches represent a serious risk for human lives, properties, and infrastructures. On June 24, 2017, a catastrophic landslide destroyed the village of Xinmo (Maoxian County, Sichuan, China) causing a large number of fatalities. Adjacent to the landslide source area, further potentially unstable masses were identified. Among them, a 4.5-million m³ body, displaced during the landslide event by about 40 m, raised serious concerns. Field monitoring and a reliable secondary risk assessment are fundamental to protect the infrastructure and the population still living in the valley. In this framework, the use of distinct element methods and continuum model methods to simulate the avalanche process was discussed. Various models (PFC, MatDEM, MassMov2D, Massflow) were used with the aim of reproducing the Xinmo landslide and, as predictive tools, simulating the kinematics and runout of the potentially unstable mass, which could cause a new catastrophic event. The models were all able to reproduce the first-order characteristics of the landslide kinematics and the morphology of the deposit, but with computational times differing by several orders of magnitude. More variability of the results was obtained from the simulations of the potential secondary failure. However, all models agreed that the new landslide could invest several still-inhabited buildings and block the course of the river again. Comparison and discussion of the performances and usability of the models could prove useful towards the enforcement of physically based (and multi-model) risk assessments and mitigation countermeasures.     

Spatio-temporal evolution of mass wasting after the 2008 M<Subscript>w</Subscript> 7.9 Wenchuan earthquake revealed by a detailed multi-temporal inventory

Strong earthquakes in mountainous areas can trigger a large number of landslides that generate deposits of loose and unconsolidated debris across the landscape. These deposits can be easily remobilised by rainfalls, with their movement frequently evolving into catastrophic debris flows and avalanches. This has been the fate of many of the 200,000 co-seismic deposits generated by the 2008 M_w 7.9 Wenchuan earthquake in Sichuan, China. Here we present one of the first studies on the post-seismic patterns of landsliding through a detailed multi-temporal inventory that covers a large portion of the epicentral area (462.5 km²). We quantify changes of size-frequency distribution, active volumes and type of movement. We analyse the possible factors controlling landslide activity and we discuss the significance of mapping uncertainties. We observe that the total number of active landslides decreased with time significantly (from 9189 in 2008 to 221 in 2015), and that post-seismic remobilisations soon after the earthquake (2008–2011) occurred stochastically with respect to the size of the co-seismic deposits. Subsequently (2013–2015), landslide rates remained higher in larger deposits than in smaller ones, particularly in proximity to the drainage network, with channelised flows becoming comparatively more frequent than hillslope slides. However, most of the co-seismic debris remained along the hillslopes and are largely stabilised, urging to rethink the way we believe that seismic activity affects the erosion patterns in mountain ranges.     

More frequent glacier-rock avalanches in Sedongpu gully are blocking the Yarlung Zangbo River in eastern Tibet

Landslides - Increasingly frequent glacier-rock avalanches (GRAs) – events triggered by the detachment of both glacier and rock materials – have occurred in recent years in the Sedongpu...     

Coseismic landslides triggered by the 8th August 2017 <Emphasis Type="Italic">M</Emphasis><Subscript>s</Subscript> 7.0 Jiuzhaigou earthquake (Sichuan,China): factors controlling their spatial distribution and implications for the seismogenic blind fault identification

On 8th August 2017, a magnitude M_s 7.0 earthquake struck the County of Jiuzhaigou, in Sichuan Province, China. It was the third M_s ≥?7.0 earthquake in the Longmenshan area in the last decade, after the 2008 M_s 8.0 Wenchuan earthquake and the 2013 M_s 7.0 Lushan earthquake. The event did not produce any evident surface rupture but triggered significant mass wasting. Based on a large set of pre- and post-earthquake high-resolution satellite images (SPOT-5, Gaofen-1 and Gaofen-2) as well as on 0.2-m-resolution UAV photographs, a polygon-based interpretation of the coseismic landslides was carried out. In total, 1883 landslides were identified, covering an area of 8.11 km², with an estimated total volume in the order of 25–30?×?10⁶ m³. The total landslide area was lower than that produced by other earthquakes of similar magnitude with strike-slip motion, possibly because of the limited surface rupture. The spatial distribution of the landslides was correlated statistically to a number of seismic, terrain and geological factors, to evaluate the landslide susceptibility at regional scale and to identify the most typical characteristics of the coseismic failures. The landslides, mainly small-scale rockfalls and rock/debris slides, occurred mostly along two NE-SW-oriented valleys near the epicentre. Comparatively, high landslide density was found at locations where the landform evolves from upper, broad valleys to lower, deep-cut gorges. The spatial distribution of the coseismic landslides did not seem correlated to the location of any known active faults. On the contrary, it revealed that a previously-unknown blind fault segment—which is possibly the north-western extension of the Huya fault—is the plausible seismogenic fault. This finding is consistent with what hypothesised on the basis of field observations and ground displacements.     

New insights on diapirism in the Adriatic Sea: the Tremiti salt structure (Apulia offshore,southeastern Italy)

The reinterpretation of public seismic profiles in the Adriatic offshore of Gargano (Apulia, southern Italy) allowed the detection of a kilometre‐scale salt‐anticline, the Tremiti diapir, within the larger Tremiti Structure. This anticline was generated by diapirism of Upper Triassic anhydrites within a thick Mesozoic to Quaternary sedimentary succession. Both internal stratal patterns and shapes of Plio‐Quaternary units, and the occurrence of an angular unconformity between early Tortonian and Pliocene rocks on the Tremiti Islands, suggest that halokinesis began during the late Miocene and is still active today. An ancient extensional SE‐dipping fault, cutting an older Mesozoic low‐amplitude anhydritic ridge, played an important role during salt mobilization, which was promoted by NW‐SE shortening. The diapir grew in the footwall of this fault, causing its upward propagation. In some places, the ancient fault served as a preferential channel for the upward migration of the anhydrites.