Time-dependent photoionization opacities in dense gamma-ray burst environments

The recent detection of a transient absorption feature in the X-ray prompt emission of GRB 990705 showed the importance of such observations in the understanding of gamma-ray bursts and their progenitors. We investigate the time dependence of photoionization edges during the prompt emission of bursts in different environments. We show that their variability can be used to infer the density and geometry of the surrounding medium, giving important clues to unveil the nature of the burst progenitor.     

Iron oxidation state in the Fe‐rich layer and silica matrix of Libyan Desert Glass: A high‐resolution XANES study

Abstract— Libyan Desert Glass (LDG) is an enigmatic type of glass that occurs in western Egypt in the Libyan Desert. Fairly convincing evidence exists to show that it formed by impact, although the source crater is currently unknown. Some rare samples present dark‐colored streaks with variable amounts of Fe, and they are supposed to contain a meteoritic component. We have studied the iron local environment in an LDG sample by means of Fe K‐edge highresolution X‐ray absorption near edge structure (XANES) spectroscopy to obtain quantitative data on the Fe oxidation state and coordination number in both the Fe‐poor matrix and Fe‐rich layers. The pre‐edge peak of the high‐resolution XANES spectra of the sample studied displays small but reproducible variations between Fe‐poor matrix and Fe‐rich layers, which is indicative of significant changes in the Fe oxidation state and coordination number. Comparison with previously obtained data for a very low‐Fe sample shows that, while iron is virtually all trivalent and in tetrahedral coordination (^[4]Fe³⁺) in the low‐Fe sample, the sample containing the Fe‐rich layers display a mixture of tetra‐coordinated trivalent iron (^[4]Fe³⁺) and penta‐coordinated divalent iron (^[5]Fe²⁺), with the Fe in the Fe‐rich layer being more reduced than the matrix. From these data, we conclude the following: a) the significant differences in the Fe oxidation state between LDG and tektites, together with the wide intra‐sample variations in the Fe‐oxidation state, confirm that LDG is an impact glass and not a tektite‐like glass; b) the higher Fe content, coupled with the more reduced state of the Fe, in the Fe‐rich layers suggests that some or most of the Fe in these layers may be directly derived from the meteoritic projectile and that it is not of terrestrial origin.     

The host galaxies of active galactic nuclei

We examine the properties of the host galaxies of 22 623 narrow-line active galactic nuclei (AGN) with  0.02 < z < 0.3  selected from a complete sample of 122 808 galaxies from the Sloan Digital Sky Survey. We focus on the luminosity of the [O  iii ]λ5007 emission line as a tracer of the strength of activity in the nucleus. We study how AGN host properties compare with those of normal galaxies and how they depend on L [O  iii ]. We find that AGN of all luminosities reside almost exclusively in massive galaxies and have distributions of sizes, stellar surface mass densities and concentrations that are similar to those of ordinary early-type galaxies in our sample. The host galaxies of low-luminosity AGN have stellar populations similar to normal early types. The hosts of high-luminosity AGN have much younger mean stellar ages. The young stars are not preferentially located near the nucleus of the galaxy, but are spread out over scales of at least several kiloparsecs. A significant fraction of high-luminosity AGN have strong Hδ absorption-line equivalent widths, indicating that they experienced a burst of star formation in the recent past. We have also examined the stellar populations of the host galaxies of a sample of broad-line AGN. We conclude that there is no significant difference in stellar content between type 2 Seyfert hosts and quasars (QSOs) with the same [O  iii ] luminosity and redshift. This establishes that a young stellar population is a general property of AGN with high [O  iii ] luminosities.     

Martian great dust storms: Interpretive axially symmetric models

The simplified theory of steady, nearly inviscid, thermally forced axially symmetric atmospheric motions developed by Schneider (1977) is applied to the study of the problem of the Martian great dust storms. A highly idealized calculation of the atmospheric response to heating concentrated in a small latitude band is carried out. Qualitatively different local and global response regimes are identified. As the heating is increased from zero, some critical value is reached at which the response jumps from local to global. It is suggested that this transition from local to global response may be related to the observed explosive growth of great dust storms. Results from the idealized model indicate that subtropical latitudes are favored for the initiation of a dust raising global dust storm, as the meridional scale of the response to a heat source of fixed intensity is largest for the heat source located close to the equator, but the surface stress in the zonal direction produced by the response increases as the heat source is moved towards the poles. Also, the steady axially symmetric Martian response to solar forcing is examined. Modification to the solar forced response due to an added latitudinally localized heat source is briefly discussed, and it is indicated that similar transition behavior to that obtained in the more idealized model is to be expected in this case also. Implications of the dynamical model for the dependence of the occurence of great dust storms on orbital parameters are remarked on.     

Anhydrite pseudomorphs and the origin of stratiform Cu–Co ores in the Katangan Copperbelt (Democratic Republic of Congo)

The stratiform Cu–Co ore mineralisation in the Katangan Copperbelt consists of dispersed sulphides and sulphides in nodules and lenses, which are often pseudomorphs after evaporites. Two types of pseudomorphs can be distinguished in the nodules and lenses. In type 1 examples, dolomite precipitated first and was subsequently replaced by Cu–Co sulphides and authigenic quartz, whereas in type 2 examples, authigenic quartz and Cu–Co sulphides precipitated prior to dolomite and are coarse-grained. The sulphur isotopic composition of the copper–cobalt sulphides in the type 1 pseudomorphs is between −10.3 and 3.1‰ relative to the Vienna Canyon Diablo Troilite, indicating that the sulphide component was derived from bacterial sulphate reduction (BSR). The generation of during this process caused the precipitation and replacement of anhydrite by dolomite. A second product of BSR is the generation of H₂S, resulting in the precipitation of Cu–Co sulphides from the mineralising fluids. Initial sulphide precipitation occurred along the rim of the pseudomorphs and continued towards the core. Precipitation of authigenic quartz was most likely induced by a pH decrease during sulphide precipitation. Fluid inclusion data from quartz indicate the presence of a high-salinity (8–18 eq. wt.% NaCl) fluid, possibly derived from evaporated seawater which migrated through the deep subsurface. ⁸⁷Sr/⁸⁶Sr ratios of dolomite in type 1 nodules range between 0.71012 and 0.73576, significantly more radiogenic than the strontium isotopic composition of Neoproterozoic marine carbonates (⁸⁷Sr/⁸⁶Sr = 0.7056–0.7087). This suggests intense interaction with siliciclastic sedimentary rocks and/or the granitic basement. The low carbon isotopic composition of the dolomite in the pseudomorphs (−7.02 and −9.93‰ relative to the Vienna Pee Dee Belemnite, V-PDB) compared to the host rock dolomite (−4.90 and +1.31‰ V-PDB) resulted from the oxidation of organic matter during BSR.     

Boron incorporation into mullite

Summary Boron-doped mullites were synthesized using aluminium nitrate-nonahydrate, tetraethoxysilane and boric acid in a sol–gel process with subsequent annealing at 950 and 1300 °C for five hours. Two different bulk compositions with constant Al₂O₃ contents (60 and 70 mol%, respectively) and varying SiO₂ plus B₂O₃ contents were investigated. X-ray powder diffraction analyses yielded a linear decrease of the lattice parameters with increasing bulk B₂O₃ content, which was interpreted as to be due to boron incorporation. Related to the increasing boron content, corresponding infrared spectra revealed a slight and continuous shift for most of the absorption bands. These data show that mullite is able to incorporate large amounts of boron into its structure (up to about 20 mol% B₂O₃ depending on the bulk composition of the starting materials). Infrared analyses suggest that boron is incorporated into the mullite structure in form of planar three-fold coordinated BO₃ groups. Author’s address: A. Beran, Institut für Mineralogie und Kristallographie, Universit?t Wien-Geozentrum, Althanstra?e 14, 1090 Wien, Austria     

The Agulhas Ridge, South Atlantic: The Peculiar Structure of a Fracture Zone

The Agulhas Ridge is a prominent topographic feature that parallels the Agulhas-Falkland Fracture Zone (AFFZ). Seismic reflection and wide angle/refraction data have led to the classification of this feature as a transverse ridge. Changes in spreading rate and direction associated with ridge jumps, combined with asymmetric spreading within the Agulhas Basin, modified the stress field across the fracture zone. Moreover, passing the Agulhas Ridge’s location between 80 and 69 Ma, the Bouvet and Shona Hotspots may have supplied excess material to this part of the AFFZ thus altering the ridge’s structure. The low crustal velocities and overthickened crust of the northern Agulhas Ridge segment indicate a possible continental affinity that suggests it may be formed by a small continental sliver, which was severed off the Maurice Ewing Bank during the opening of the South Atlantic. In early Oligocene times the Agulhas Ridge was tectono-magmatically reactivated, as documented by the presence of basement highs disturbing and disrupting the sedimentary column in the Cape Basin. We consider the Discovery Hotspot, which distributes plume material southwards across the AAFZ, as a source for the magmatic material.     

Development of two novel CYP-antibodies and their use in a PCB exposure experiment with Mytilus edulis

In an attempt to learn more about the cytochrome P450 (CYP) system of mussels, we used protein databases and alignment software to extract highly conserved CYP sequences. From these alignments synthetic peptides were produced and used for rabbit immunisation, which yielded polyclonal antibodies against the CYP families 2 and 4. The antibodies were evaluated with Western Blot and ELISA assays, using digestive gland microsomal samples from the mussel Mytilus edulis. Western Blots revealed immunoreactions for both antibodies. The anti-CYP2 sequence rendered one major immunopositive protein of ≈49 kDa size, and weak signals for proteins of ≈41 and 56 kDa size. The anti-CYP4 sequence rendered two major bands of ≈56 and 59 kDa size, and also a weak immunoreaction with a protein of ≈43 kDa size. ELISA rendered only weak signals even with a 1:50 dilution of IgG-purified serum. A 10-day exposure to Aroclor 1254 did not appear to affect any of the immunopositive proteins, while total PCBs in soft bodies increased from 14–40 ng/g DW in controls to 373–638 ng/g DW in exposed mussels.     

Tying seismic data to geologic information from core data: an example from ODP Leg 177

The integration of seismic data with core data should provide ground-truth to a structural interpretation of seismic data. The main difficulty in such an integration effort is the correct translation of physical property measurements on cores to a form which can be used in seismostratigraphic interpretation. In the absence of down-hole well data and check-shots, required knowledge of the velocity structure at the drilling locations can be obtained directly from measurements of the physical properties of core samples. This involves upscaling of the data from physical properties of cores to the sample interval used in the seismic data. In the present study, three of the seven drill-sites of ODP (Ocean Drilling Program) Leg 177 in 1997/1998, located on the Agulhas Ridge in the south-eastern Atlantic (sites 1088–1090), were connected with eight seismic profiles. Physical properties data measured on the cores from the various holes at each site were combined to create a single continuous log and used to construct synthetic seismograms. The synthetics generally show a good agreement with real seismic data in terms of amplitude and waveform. Some reflections in these generated traces may have a time-shift due to sections with incomplete or spurious P-wave velocity measurements in the ODP datasets. The main reflectors identified in the real seismic data correspond to hiatuses or periods of reduced sedimentation rates, and correlate well with density variations. One particular hiatus, clearly observable in the real seismic data, was not unequivocally identifiable in the various types of core data, and tying core data to seismic data can confirm its existence in the core data, showing the benefit of including seismic data in an interpretation of core log data. On the other hand, core data provide a calibration tool for the geological timescale of seismic data and information about the lithology, needed in the interpretation of seismic data.