Readout Techniques for Drift and Low Frequency Noise Rejection in Infrared Arrays

Three different methods are presented to subtract thermal drifts and low-frequency noise from the signal of infrared array. The first is dead pixels with open Indium bumps, the second is reference output as implemented on the Hawaii2 multiplexer, and the third is dark pixels to emulate reference cells having a capacity connected to the gate of the unit cell field-effect transistor (FET). The third method is the most effective and yields a reduction in readout noise from15.4–9.4 erms. A novel method will be described to extend this readout technique to the Aladdin 1 K × 1 K InSb array. This revised version was published online in July 2006 with corrections to the Cover Date.     

Side-scan and acoustic subbottom characterization of the sea floor near the Dry Tortugas, Florida

 Between 2 and 6 February, 1995, a 25 km² area at the Dry Tortugas (Florida Keys) was surveyed with a 100 kHz side-scan sonar system and 3.5-kHz subbottom profiler. The side-scan system revealed a pattern of alternating high and low backscatter. The subbottom profiler showed areas with no acoustic penetration between sediment troughs. The combination of both methods allowed delineation of the boundaries in high-backscatter regions, and sediment samples allowed correlations between high backscatter and coarser-grained sediments.     

Towards high‐resolution 3D marine seismic surveying using Boomer sources

The use of Boomer sources for 3D seismic imaging of shallow marine structures was investigated in a feasibility study. Boomers show sufficient stability to be used in multichannel seismic surveys. The acquisition of a high-frequency, densely sampled seismic data volume was successfully performed in the Baltic Sea. A Pleistocene fluvial channel system and shallow gas accumulations were revealed beneath the unconsolidated sediments which constitute the sea-floor in the southern Kiel Bay.     

Factors controlling the development of prism faces in granite zircons: a microprobe study

Based on microprobe work, we present arguments that the size relations of the two common prisms {100} and {110} of accessory granite zircons are strongly influenced by chemical factors. Magmatic growth zoning patterns, which we have studied by means of backscattered electron imaging in special zircon sections orientated perpendicular to the c-axis, do not support previous models which assumed temperature or the degree of ZrSiO₄ supersaturation to be the primary prism-form-directing factors. The element U, which usually occupies the Zr-sites of granite zircoms to some degree, is strongly suspected of producing an (adsorptive) growth-blocking effect for {110}-type faces thus creating crystals with {110}-dominated prism morphology. A second independent mechanism that is likely to form zircons with large {110} prisms is the common substitution Zr⁴⁺+Si⁴⁺ versus Y(REE) and P contents (relative to Zr) are, according to our model, predestinated to produce zircons with large {100} prisms and vice versa.Dedicated to Prof. Günther Frasl on the occasion of his seventieth birthday     

Redistribution of HFSE elements during rutile replacement by titanite

Titanite growth at the expense of rutile during retrograde hydration of eclogite into amphibolite is a common phenomenon. We investigated an amphibolite sample from the Tromsø eclogite facies terrain in Northern Norway to gain insight into the trace element distribution between rutile and titanite during incomplete resorption of the rutile by titanite. Patchy compositional zoning of Al, Ti, and F in titanite relates to the presence of a fluid with variable Ti/Al and/or F during its growth. Laser ablation ICP–MS and electron microprobe data for high field strength elements (HFSE: Nb, Zr, Ta, and Hf) of rutile resorbed by titanite indicate a pronounced enrichment of these elements in the rim of a large single rutile crystal (~8 mm) and a systematic decrease towards uniform HFSE contents in the large core. HFSE contents of smaller rutile grains (~0.5 mm) and rutile inclusions (<100 μm) in the titanite overgrowth are similar or higher than in the rims of large rutile crystals. Element profiles from the rim inward demonstrate that HFSE enrichment in rutile is controlled by diffusion. HFSE ratios in diffusion-altered rutile show systematic variations compared with the uniform core composition of the large rutile. Modelling of Zr and Nb diffusion in rutile indicates that diffusion coefficients in rutile in fluid-dominated natural systems must be considerably higher than those determined experimentally at 1 bar in dry systems. Variations of HFSE contents in the newly formed titanite show no systematic spatial distribution. HFSE ratios in titanite and the rims of rutile are different, indicating different solid/fluid distribution coefficients in these minerals. Element fractionation by diffusion into the relict rutile and during fluid-mediated growth of new titanite could substantially change the HFSE budget of these minerals and could affect their use for geochemical tracing and other applications, such as Zr-based geothermobarometry.     

Pre-Cenozoic intra-plate magmatism along the Central Andes (17–34°S): Composition of the mantle at an active margin

Sr–Nd–Pb isotope ratios of alkaline mafic intra-plate magmatism constrain the isotopic compositions of the lithospheric mantle along what is now the eastern foreland or back arc of the Cenozoic Central Andes (17–34°S). Most small-volume basanite volcanic rocks and alkaline intrusive rocks of Cretaceous (and rare Miocene) age were derived from a depleted lithospheric mantle source with rather uniform initial ¹⁴³Nd/¹⁴⁴Nd ( 0.5127–0.5128) and ⁸⁷Sr/⁸⁶Sr ( 0.7032–0.7040). The initial ²⁰⁶Pb/²⁰⁴Pb ratios are variable (18.5–19.7) at uniform ²⁰⁷Pb/²⁰⁴Pb ratios (15.60 ± 0.05). A variety of the Cretaceous depleted mantle source of the magmatic rocks shows elevated Sr isotope ratios up to 0.707 at constant high Nd isotope ratios. The variable Sr and Pb isotope ratios are probably due to radiogenic growth in a metasomatized lithospheric mantle, which represents the former sub-arc mantle beneath the early Palaeozoic active continental margin. Sr–Nd–Pb isotope signatures of a second mantle type reflected in the composition of Cretaceous (one late Palaeozoic age) intra-plate magmatic rocks (¹⁴³Nd/¹⁴⁴Nd  0.5123, ⁸⁷Sr/⁸⁶Sr  0.704, ²⁰⁶Pb/²⁰⁴Pb  17.5–18.5, and ²⁰⁷Pb/²⁰⁴Pb  15.45–15.50) are similar to the isotopic composition of old sub-continental lithospheric mantle of the Brazilian Shield.

Published Nd and Sr isotopic compositions of Mesozoic to Cenozoic arc-related magmatic rocks (18–40°S) represent the composition of the convective sub-arc mantle in the Central Andes and are similar to those of the Cretaceous (and rare Miocene) intra-plate magmatic rocks. The dominant convective and lithospheric mantle type beneath this old continental margin is depleted mantle, which is compositionally different from average MORB-type depleted mantle. The old sub-continental lithospheric mantle did not contribute to Mesozoic to Cenozoic arc magmatism.     

Numerical determination of pressure-dependent effective thermal conductivity in Berea sandstone

In this paper, the methods of digital rock physics are applied to determine pressure-dependent effective thermal conductivity in rock samples. Simulations are performed with an in-house three-dimensional finite volume code. In the first step, four numerical models are derived from a given tomographic scan of Berea sandstone. Consequently, simulations of the thermal conductivity at ambient conditions are performed and validated with experimental data. In a second step, a new workflow for the determination of the pressure-dependent thermal conductivity in rock samples is elaborated, tested and calibrated. Results originating from the derived workflow show very good agreement with experimental data.     

Numerical modelling of the seasonal variability of the North and Tropical Atlantic currents using an adaptation approach

The paper reports computed data on the seasonal variability of the Atlantic Ocean currents which were obtained through numerical integration (using conservative difference schemes) of non-linear equations of hydrothermodynamics taking into account an upper quasi-homogeneous layer and the bottom topography. The seasonal variability of the meridional heat transfer is discussed. The results were obtained using an adaptation approach.Translated by Vladimir A. Puchkin.