Porphyry Molybdenum Prospectivity in the Zhongdian Arc,SW China: Use of Singularity and Factor Analyses for Resource Assessment

Natural Resources Research - The Zhongdian arc is an important mineral province in southwest China that hosts significant Cu- and Mo-rich ore deposits. These are mainly present as Late Triassic...     

Eruptive history of the Barombi Mbo Maar, Cameroon Volcanic Line, Central Africa: Constraints from volcanic facies analysis

his study presents the first and detail field investigations of exposed deposits at proximal sections of the Barombi Mbo Maar (BMM), NE Mt Cameroon, with the aim of documenting its past activity, providing insight on the stratigraphic distribution, depositional process, and evolution of the eruptive sequences during its formation. Field evidence reveals that the BMM deposit is about 126m thick, of which about 20m is buried lowermost under the lake level and covered by vegetation. Based on variation in pyroclastic facies within the deposit, it can be divided into three main stratigraphic units: U₁, U₂ and U₃. Interpretation of these features indicates that U₁ consists of alternating lapilli-ash-lapilli beds series, in which fallout derived individual lapilli-rich beds are demarcated by surges deposits made up of thin, fine-grained and consolidated ash-beds that are well-defined, well-sorted and laterally continuous in outcrop scale. U₂, a pyroclastic fall-derived unit, shows crudely lenticular stratified scoriaceous layers, in which many fluidal and spindle bombs-rich lapilli-beds are separated by very thin, coarse-vesiculatedash-beds, overlain by a mantle xenolith- and accidental lithic-rich explosive breccia, and massive lapilli tuff and lapillistone. U3 displays a series of surges and pyroclastic fall layers. Emplacement processes were largely controlled by fallout deposition and turbulent diluted pyroclastic density currents under “dry” and “wet” conditions. The eruptive activity evolved in a series of initial phreatic eruptions, which gradually became phreatomagmatic, followed by a phreato-Strombolian and a violent phreatomagmatic fragmentation. A relatively long-time break, demonstrated by a paleosol between U₂ and U₃, would have permitted the feeding of the root zone or the prominent crater by the water that sustained the next eruptive episode, dominated by subsequent phreatomagmatic eruptions. These preliminary results require complementary studies, such as geochemistry, for a better understanding of the changes in the eruptive styles, and to develop more constraints on the maar’s polygenetic origin.     

Manpower and institutional constraints on urban water supply in Nigeria: A case study of the northwest zone

This study analyses some of the manpower and institutional constraints to urban water supplies in seven states in the northwestern sector of Nigeria. The study is based on an audit and analysis of the manpower situation in the state water agencies. The results show a very poor manpower situation and weaknesses in the policy, financial and institutional frameworks within which the agencies have to operate. The dismal manpower situation is obvious in the very small proportion of personnel with tertiary level technical and engineering qualifications. The impact of the shortage of qualified personnel is most felt in the operational field, especially in the area (district) offices. Low calibre of staff, poor funding and inadequate provision of transport and communication facilities greatly impair the operations of the area offices. The weak financial position of the water agencies and the civil service organizational and emolument structures under which they function have made it difficult for them to attract and retain highly qualified professionals, particularly, engineers. Much of the problems can be solved with greater autonomy of action especially in the fixing of water rates and service charges. Also, many of the constraints can be tackled with greater cooperation and coordination of effort between the state water agencies themselves.     

Isolation and characterization of Aeromonas species from an eutrophic tropical estuary

Isolation and characterization of Aeromonas species were undertaken in the Ebrié lagoon (Abidjan, Côte d’Ivoire) over a one year period. Overall 63% of 501 water samples were identified as positive for Aeromonas spp. A. sobria, A. hydrophila and A. caviae represent respectively 49.20%, 20.63% and 30.15% of the positive samples. Thirty nine of the positive samples were recovered from surface water samples; while 24 bottom water samples were positive for Aeromonas. Aeromonas species are most frequently (82.53) present in the Ebrié lagoon urban area during the rainy and flood seasons when the salinity is low and below 10‰. A lower isolation frequency is noticed during the dry season when water salinity is over 10‰. Finally, a higher isolation frequency occurred in samples with highest counts of Escherichia coli.     

Geophysical assessment of subsurface coastal sediments and their engineering implications

Surface geophysics and a priori information were employed to delineate the subsurface geology at Idi-oro in Abijo, Ibeju Lekki area of Lagos, Nigeria for foundation investigation purpose. Resistivity measurement was conducted using 1-D and 2-D resistivity probing techniques. The resistivity measurements were made with ABEM tetrameter model SAS 1000 system. The 1-D vertical electrical resistivity sounding data were obtained using the Schlumberger electrode array while the 2-D resistivity data were obtained using the dipole–dipole array. The interpreted results revealed three to five subsurface geological layers. This is made up of the top soil with resistivity values that vary from 132.4 to over 2,313.5 Ω?m and thickness values that range from 0.3 to 4.8 m, the fine sand with resistivity values that vary from 221.0 to 3,032.7 Ω?m and thickness values that range from 0.4 to 5.5 m, the medium sand with resistivity values that vary from 202.8 to 1,247.7 Ω?m and thickness values that range from 4.9 to 58.4 m. On the other hand, the clayey sand has the resistivity values that vary from 146.1 to 1,744.0 Ω?m and thickness values that vary from 2.2 to 26.3 m, while the coarse sand has resistivity values that vary from 238.3 to 14,313.9 Ω?m but with no thickness value because the current terminated in this layer. The resistivity data correlate well with borehole logs. On the whole, it is concluded that the investigated area has competent sand layer that can support medium to giant engineering structures with resistivity values that vary from 202 to 14,314 Ω?m and thickness values that vary from 0.8 to 58.4 m.     

Regional geochemical baseline concentration of potentially toxic trace metals in the mineralized Lom Basin,East Cameroon: a tool for contamination assessment

The distribution of trace metals in active stream sediments from the mineralized Lom Basin has been evaluated. Fifty-five bottom sediments were collected and the mineralogical composition of six pulverized samples determined by XRD. The fine fraction (<?150 µm) was subjected to total digestion (HClO₄?+?HF?+?HCl) and analyzed for trace metals using a combination of ICP-MS and AAS analytical methods. Results show that the mineralogy of stream sediments is dominated by quartz (39–86%), phyllosilicates (0–45%) and feldspars (0–27%). Mean concentrations of the analyzed metals are low (e.g. As?=?99.40 µg/kg, Zn?=?573.24 µg/kg, V?=?963.14 µg/kg and Cr?=?763.93 µg/kg). Iron and Mn have significant average concentrations of 28.325 and 442 mg/kg, respectively. Background and threshold values of the trace metals were computed statistically to determine geochemical anomalies of geologic or anthropogenic origin, particularly mining activity. Factor analysis, applied on normalized data, identified three associations: Ni–Cr–V–Co–As–Se–pH, Cu–Zn–Hg–Pb–Cd–Sc and Fe–Mn. The first association is controlled by source geology and the neutral pH, the second by sulphide mineralization and the last by chemical weathering of ferromagnesian minerals. Spatial analysis reveals similar distribution trends for Co–Cr–V–Ni and Cu–Zn–Pb–Sc reflecting the lithology and sulphide mineralization in the basin. Relatively high levels of As were concordant with reported gold occurrences in the area while Fe and Mn distribution are consistent with their source from the Fe-bearing metamorphic rocks. These findings provide baseline geochemical values for common and parallel geological domains in the eastern region of Cameroon. Although this study shows that the stream sediments are not polluted, the evaluation of metal composition in environmental samples from abandoned and active mine sites for comparison and environmental health risk assessment is highly recommended.     

Plume-lithosphere interaction beneath Mt. Cameroon volcano, West Africa: Constraints from U-Th-Ra and Sr-Nd-Pb isotope systematics

Precise measurements of ²³⁸U-²³⁰Th-²²⁶Ra disequilibria in lavas erupted within the last 100 yr on Mt. Cameroon are presented, together with major and trace elements, and Sr-Nd-Pb isotope ratios, to unravel the source and processes of basaltic magmatism at intraplate tectonic settings. All samples possess ²³⁸U-²³⁰Th-²²⁶Ra disequilibria with ²³⁰Th (18-24%) and ²²⁶Ra (9-21%) excesses, and there exists a positive correlation in a (²²⁶Ra/²³⁰Th)-(²³⁰Th/²³⁸U) diagram. The extent of ²³⁸U-²³⁰Th-²²⁶Ra disequilibria is markedly different in lavas of individual eruption ages, although the (²³⁰Th/²³²Th) ratio is constant irrespective of eruption age. When U-series results are combined with Pb isotope ratios, negative correlations are observed in the (²³⁰Th/²³⁸U)-(²⁰⁶Pb/²⁰⁴Pb) and (²²⁶Ra/²³⁰Th)-(²⁰⁶Pb/²⁰⁴Pb) diagrams. Shallow magma chamber processes like magma mixing, fractional crystallization and wall rock assimilation do not account for the correlations. Crustal contamination is not the cause of the observed isotopic variations because continental crust is considered to have extremely different Pb isotope compositions and U/Th ratios. Melting of a chemically heterogeneous mantle might explain the Mt. Cameroon data, but dynamic melting under conditions of high D_U and D_U/D_Th, long magma ascent time, or disequilibrium mineral/melt partitioning, is required. The most plausible scenario to produce the geochemical characteristics of Mt. Cameroon samples is the interaction of melt derived from the asthenospheric mantle with overlying sub-continental lithospheric mantle which has elevated U/Pb (>0.75) and Pb isotope ratios (²⁰⁶Pb/²⁰⁴Pb > 20.47) due to late Mesozoic metasomatism.     

Hydrogeochemical controls and usability of groundwater in the semi-arid Mayo Tsanaga River Basin: far north province,Cameroon

Deuterium, δ ¹⁸O, major ions and dissolved silica in groundwater from semi-arid Mayo-Tsanaga river basin in the Far North Province, Cameroon were used to trace hydrogeochemical processes that control their concentrations and to explore for usability of the water. Electrical conductivity ranges from 57–2,581 μs/cm with alternating low and high values along the hydraulic gradient. Waters from piedmont alluvium show low concentrations in major cations, which peak in Mg within basalt, Na within plain alluvium, and Ca within basalt and the sandy Limani-Yagoua ridge. The initial dominant groundwater composition is CaHCO₃, which did not evolve within the basalt and piedmont alluvium, but evolved to NaHCO₃ in the granite and plain alluvium. The main processes controlling the major ions composition include the following: (1) dissolution of silicates and fluorite; (2) precipitation of fluorite and carbonate; (3) cation exchange of Ca in water for Na in clay; (4) and anthropogenic activities. The δD and δ ¹⁸O ratios vary from −35 to 0.7 and −5.3 to 1.1‰, respectively. The lowest and highest isotope ratios are observed in groundwater within the downstream sandy Limani-Yagoua ridge and the upstream graintes respectively. Variation in isotope ratios depends on altitude effect of −0.48‰ per 100 m between 600 and 850 m asl, and on evaporation, which had insignificant effect on the water salinity. Seventy percent of the groundwater shows poor drinking quality and 90% is suitable for irrigation. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Disaster prevention,disaster preparedness and local community resilience within the context of disaster risk management in Cameroon

This paper presents a simulation of three components of near-field ground shaking recorded during the main shock at three stations of the September 16, 1978, Tabas (M _w = 7.4), Iran, earthquake, close to the causative fault. A hybrid method composed of a discrete wavenumber method developed by Bouchon (Bouchon in Bull Seismol Soc Am 71:959–971, 1981; Cotton and Coutant in Geophys J Int 128:676–688, 1997) and a stochastic finite-fault modeling based on a dynamic corner frequency proposed by Motazedian and Atkinson (Bull Seismol Soc Am 95:995–1010, 2005), modified by Assatourians and Atkinson (Bull Seismol Soc Am 97:935–1949, 2007), is used for generating the seismograms at low (0.1–1.0 Hz) and high frequencies (1.0–20.0 Hz), respectively. The results are validated by comparing the simulated peak acceleration, peak velocity, peak displacement, Arias intensity, the integral of velocity squared, Fourier spectrum and acceleration response spectrum on a frequency-by-frequency basis, the shape of the normalized integrals of acceleration and velocity squared, and the cross-correlation with the observed time-series data. Each characteristic is compared on a scale from 0 to 10, with 10 being perfect agreement. Also, the results are validated by comparing the simulated ground motions with the modified Mercalli intensity observations reported by reconnaissance teams and showed reasonable agreement. The results of the present study imply that the damage distribution pattern of the 1978 Tabas earthquake can be explained by the source directivity effect.