Integration of GIS,AHP and TOPSIS for earthquake hazard analysis

Worldwide, earthquakes and related disasters have persistently had severe negative impacts on human livelihoods and have caused widespread socioeconomic and environmental damage. The severity of these disasters has prompted recognition of the need for comprehensive and effective disaster and emergency management (DEM) efforts, which are required to plan, respond to and develop risk mitigation strategies. In this regard, recently developed methods, known as multi-criteria decision analysis (MCDA), have been widely used in DEM domains by emergency managers to greatly improve the quality of the decision-making process, making it more participatory, explicit, rational and efficient. In this study, MCDA techniques of the Analytical Hierarchical Process (AHP) and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), integrated with GIS, were used to produce earthquake hazard and risk maps for earthquake disaster monitoring and analysis for a case study region of Küçükçekmece in Istanbul, Turkey. The five main criteria that have the strongest influence on the impact of earthquakes on the study region were determined: topography, distance to epicentre, soil classification, liquefaction and fault/focal mechanism. AHP was used to determine the weights of these parameters, which were also used as input into the TOPSIS method and GIS (ESRI ArcGIS) for simulating these outputs to produce earthquake hazard maps. The resulting earthquake hazard maps created by both the AHP and TOPSIS models were compared, showing high correlation and compatibility. To estimate the elements at risk, population and building data were used with the AHP and TOPSIS hazard maps for potential loss assessment; thus, we demonstrated the potential of integrating GIS with AHP and TOPSIS in generating hazard maps for effective earthquake disaster and risk management.     

影响生物土壤结皮在沙丘不同地貌部位分布的风因子讨论

 生物土壤结皮广泛分布于干旱和半干旱区,它的形成和发育对荒漠生态系统修复过程产生重要的影响。采用野外观测的方法,测定了固定沙丘纵断面表面气流和生物土壤结皮的发育特征。结果发现,近地表气流在迎风坡坡脚部位最低,丘顶最高,从坡脚到丘顶呈增加的趋势。近地表气流在背风坡中上部急剧下降,中下部位有所增加,到坡脚部位又呈减少的趋势,但后者均远低于丘顶的风速。各观测点不同高度风速放大率不尽相同。生物土壤结皮发育特征的测定结果显示,其厚度、抗剪强度和细颗粒物含量均从沙丘底部向中上部呈减少的趋势,表现出风速较高区域生物土壤结皮的发育程度较低,风速较低区域生物土壤结皮的发育程度较高的特点,说明生物土壤结皮在沙丘不同地貌部位的分布与由地形差异导致的气流变化之间具有密切的关系。     

The investigation of soil–structure resonance of historical buildings using seismic refraction and ambient vibrations HVSR measurements: a case study from Trabzon in Turkey

In this study, two different historical structures built in Trabzon have been processed by ambient vibrations and seismic refraction measurements. One of the investigated historical structures is the Atatürk Pavilion built in the nineteenth century, and the other one is Hagia Sophia which was built in the thirteenth century. These two buildings are among the most important historical buildings in Trabzon and are very important for the tourism of the city. In order to determine peak/s frequency and amplitude from the horizontal-to-vertical spectral ratios (HVSRs), we have performed several measurements of ambient vibrations both inside (at different floors) and outside (on the ground) of structures. We have also conducted seismic prospecting to evaluate the vertical 1D and 2D profile of longitudinal and shear seismic waves, V_p and V_s, respectively. To this purpose, we have performed seismic refraction tomography and MASW. Ambient vibrations and seismic measurements were compared with each other. The results show that average predominant frequencies and HVSR amplitudes of inside and outside of Atatürk Pavilion are 4.0 Hz, 7.8 Hz and 2.6, 2.3, respectively. The V_p values vary from 300 to 2070 m/s, and the V_s for maximum effective depth is up to 790 m/s in Atatürk Pavilion. On the other hand, average predominant frequencies and HVSR amplitudes of inside and outside of Hagia Sophia and its tower are 4.7, 4.4 and 2.4 Hz and 1.6, 1.8 and 6.9, respectively. V_p values range from 450 to 2200 m/s, and V_s for maximum effective depth is also up to 1000 m/s in Hagia Sophia. The frequency values (F₀?=?V_s/4 h) calculated from the velocities up to the maximum effective depth for Atatürk Pavilion are in good agreement with the predominant frequency values determined from ambient vibrations. Atatürk Pavilion and Hagia Sophia soils have been classed according to Eurocode 8 by using V_S30 values. The class was defined as “B.” Moreover, the bedrock in studied area is basalt. The high V_p and V_s values are also compatible with the lithology. The HVSR curves measured at the Hagia Sophia show the presence of clear peaks when compared to the Atatürk Pavilion. At the same time, there are marked velocity changes in the V_s sections calculated in both areas. As a result, in both areas there are significant impedance contrasts in the subsoil. However, this impedance contrast is more evident in Hagia Sophia. This could be also compatible with a lithological transition. The possible soil–structure interaction was investigated by using all the results and evaluated in terms of resonance risk. It is thought that the probability of resonance risk at Atatürk Pavilion is low according to the ambient vibrations measurements. However, resonance risk should be taken into consideration at Hagia Sophia site since the predominant frequency values are very close to each other. Finally, this site should be investigated in detail and necessary precautions should be taken against the risk of resonance.     

Net earthquake hazard and elements at risk (NEaR) map creation for city of Istanbul via spatial multi-criteria decision analysis

The creation of earthquake hazard maps requires various datasets with selected attenuation relations. Based on the selected attenuation relation, the calculation time varies from half an hour to a couple of days. The length of time needed to create an earthquake hazard map also depends on the resolution of the resulting map. The time gets longer as the resolution of the resulting earthquake hazard map gets higher. The basic form of an attenuation relation requires complex calculation algorithms including geospatial information related to the region of interest. Nowadays, next-generation attenuation (NGA) models are introduced to generate more realistic earthquake hazard maps. However, the more complex the attenuation relation is, the longer time will be required to create a hazard map. This paper offers a new method to create high-resolution earthquake hazard maps, faster than using traditional attenuation relation methods, by using an analytic hierarchy process of spatial multi-criteria decision analysis and geographic information systems. This method has been generated and tested for the city of Istanbul. The resulting maps are compared with the earthquake hazard maps created for the city of Istanbul by using the NGA model of Boore and Atkinson (in Boore–Atkinson NGA ground motion relations for the geometric mean horizontal component of peak and spectral ground motion parameters (trans: Engineering Co, University of California B). Pacific Earthquake Engineering Research Center 2007). A second output of this paper is a map of the elements at risk (EaR) for the population and buildings of Istanbul, and the introduction of a new approach of net elements at risk (NEaR).     

Comparative evaluation of GIS-based best–worst method (BWM) for emergency facility planning: perspectives from two decision-maker groups

Natural Hazards - Nowadays, organizational decisions are made collectively in decision groups to achieve more meaningful and impactful outcomes, ranging from product design, policy and strategy...     

Spatial decision support systems (SDSS) and software applications for earthquake disaster management with special reference to Turkey

Natural Hazards - Earthquake disasters pose significant risks and remain a serious threat for millions of people causing a devastating loss of lives and damage to the infrastructure resulting in...     

Effects of Fenton Pre‐Treatment on Waste Activated Sludge Properties

Fenton process was investigated for the purpose of biological sludge disintegration. The Box–Wilson experimental design was employed to evaluate the effects of major process variables (Fe(II) and H₂O₂ concentrations) on both disintegration and dewatering performance of sludge. Results showed that 4 g Fe(II)/kg total solids (TSs) and 60 g H₂O₂/kg TS are efficient for floc disintegration. Fenton pre‐treatment enhanced the biodegradability of sludge. For 4 g Fe(II)/kg TS and 60 g H₂O₂/kg TS, 19.4% higher methane production was achieved compared to raw sludge in biochemical methane potential assay. Fenton pre‐treatment resulted in the release of organic sludge components into the liquid phase. For 4 g Fe(II)/kg TS and 60 g H₂O₂/kg TS, dissolved organic carbon and total nitrogen in sludge's supernatant increased by 75.74 and 60.60%, respectively. Fenton pre‐treatment enhanced the filterability of sludge and it can be applied for conditioning purpose before mechanical dewatering units.