Environmental hydrogeology of the southern sector of the Samborombon Bay wetland,Argentina

The Samborombon Bay wetland is located on the west margin of the Rio de la Plata estuary, in the Province of Buenos Aires, Argentina. This paper analyses the geological, geomorphologic, soil and vegetation characteristics of the southernmost sector of this wetland and their influence on surface water and groundwater. The study area presents three hydrologic units: coastal dunes, sand sheets and coastal plain. Coastal dunes and sand sheets are recharge zones of high permeability with well-drained, non-saline soils, and a few surface water flows. Changes in the water table are related to rainfall. Groundwater in coastal dunes is Ca–Mg–HCO₃ to Na–HCO₃, and of low salinity (590 mg/l). Groundwater in sand sheets is mainly Na–HCO₃ with a salinity of about 1,020 mg/l. The coastal plain exhibits medium to low permeability sediments, with submerged saline soils poorly drained. Groundwater is Na–Cl with a mean salinity of 16,502 mg/l. A surface hydrological network develops in the coastal plain. Surface water levels near the shoreline are affected by tidal fluctuations; far from the shoreline water accumulates because of poor drainage. Both sectors have Na–Cl water, but the former is more saline. Human intervention and sea level rise may affect the wetland severely.     

Monitoring Large-Scale Tests for Nuclear Waste Disposal

Two large-scale “in situ” demonstration experiments and their instrumentation are described. The first test (FEBEX Experiment) involves the hydration of a compacted bentonite barrier under the combined effect of an inner source of heat and an outer water flow from the confining saturated granite rock. In the second case, the progressive de-saturation of Opalinus clay induced by maintained ventilation of an unlined tunnel is analyzed. The paper shows the performance of different sensors (capacitive cells, psychrometers, TDR’s) and a comparison of fill behaviour with modelling results. The long term performance of some instruments could also be evaluated specially in the case of FEBEX test. Capacitive sensors provide relative humidity data during long transient periods characterised by very large variations of suction within the bentonite.     

Relationships Between Community Structure of the Intertidal Macroinfauna and Sandy Beach Characteristics Along the Chilean Coast

Abstract. Eight sandy beaches were seasonally sampled along the coast of Chile, from ca. 21 to 42° S (about 3000 km) to study the relationship between community structure of the intertidal macroinfauna and beach characteristics. Sediment samples (0.1 m², 30 cm deep) were collected (July – September 1998 and December 1998 – January 1999) with plastic cylinders at 15 equally spaced levels along three replicated transects extending from above the drift line to the swash zone. The sediment was sieved through a 1 mm mesh and the organisms collected stored in 5 % formalin. To define beach types, Dean's parameter (Ω) was calculated from wave heights and periods, and fall velocity of sand particles from the swash zone. Crustaceans (mainly peracarids) were the most diverse group with 14 species, followed by polychaetes with 5 species. The talitrid amphipod Orchestoidea tuberculata , the cirolanid isopods Excirolana braziliensis and E. hirsuticauda and the anomuran decapod Emerita analoga were the most widely distributed and common species. Regression analyses between species richness, abundance and biomass of the whole macroinfauna versus sediment characteristics, beach face slopes and morphodynamic beach states showed no significant relationships. Thus, macroinfaunal community characteristics did not increase linearly from lower intermediate to higher intermediate or dissipative beach states as had been found before in Chile or in other coasts. A comparative analysis with data from sandy beaches of other world regions showed that the number of species inhabiting Chilean sandy beaches was generally lower, whereas total population abundances were generally higher compared with values reported elsewhere.     

Presence of Hippidion at two sites of western Argentina: Diet composition and contribution to the study of the extinction of Pleistocene megafauna

The composition of Hippidion diet, and possible changes that could relate to its extinction, were evaluated in the Argentinean-Chilean Central Andes, a Neotropical environment characterized by arid to semiarid conditions (Andean hot and cold deserts). Microhistological analyses were made on feces of Hippidion found at Los Morrillos (31°43′S–68°42′W, 3000 m a.s.l.) and Gruta del Indio (34°35′S, 68°22′W, 660 m a.s.l.). At Gruta del Indio the diet of Hippidion was based mainly on woody species. At Los Morrillos, it was based on herbaceous species.This flexibility in diet composition could be a relative adaptive advantage allowing a longer permanence of this species in comparison to others recorded in the region (such as Megatheriumand Mylodon). Nevertheless, this advantage was not enough to guarantee its survival during the Holocene. Extinction could have been affected by diverse agents, such as growing aridification of the area, increasing competition with other species (mainly Lama guanicoe), and human presence, along with a relatively low population density (as expected from the limited presence of Hippidion at the archaeological and palaeontological sites of South America. At Gruta del Indio significant changes in the diet of Hippidion corresponding to different intervals of the period 31,000–9000 ¹⁴C BP are not evident. Given this evidence for similar diets for Hippidion throughout the late Quaternary, other factors need to be considered to explain the extinction of this horse.     

Zoogeographical affinities and the use of vertebrates in Xochicalco (Morelos, Mexico)

Xochicalco is a Mesoamerican locality that developed after the fall of Teotihuacan, and became one of the most important urban, ceremonial and military communities of its time. Chronologically, it is situated in the Epiclassic period (700–900 A.D.) and its buildings show a marked hierarchical distribution. The site is located in the current State of Morelos (Mexico), embedded in the Mexican Transition Zone between the two major American zoogeographic regions: Nearctic and Neotropic. The animal remains identified show a mixed assemblage from both regions. With the aim of exploring the relationship between the zoogeographical affinities of identified fauna and differential uses due to the hierarchical distribution of the site, the data were processed using two multivariate analyses in order to find the animals that characterize each social level. This comparison shows that some animals are common to all the social levels, suggesting easy availability, while a few others, mainly from the Neotropic area, were associated only with the elite places suggesting their quality as social markers. This approach offers an initial hypothesis about the different cultural attitudes toward the animals in a Mesoamerican locality, little studied, showing a positive relationship between the zoogeographic affinity and the social hierarchy.     

Periodic orbits of an electric charge in a magnetic dipole field

Periodic orbits in the Stormer problem are studied using the symmetry lines of the Poincaré map introduced by De Vogelaere. Many known facts are explained by mean of these lines. The dynamics of four special symmetry lines when the Stormer parameter ₁ changes is presented, and we obtain a clear global view of the structure of the simple periodic orbits and their bifurcations, including the asymmetrical ones. New asymmetrical multiple periodic orbits are obtained.     

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.     

Flotation of oxidized minerals of copper using a new synthetic chelating reagent as collector

A new synthetic reagent containing a mixed aliphatic-aromatic structure, with a hydrocarbon chain and an aminothiophenol chelating group, has proven to be an effective collector for the flotation of chrysocolla minerals. The flotation is optimum in the narrow pH range of 5.5 to 6, falls sharply at pH 5, and is moderate in the pH range 7 to 11. Infrared spectra indicate that copper aminothiophenolate chelates are formed on the surface of the chrysocolla under the conditions of maximum flotation.     

Yucatán karst features and the size of Chicxulub crater

The buried Chicxulub impact structure is marked by a dramatic ring of sinkholes (called cenotes if containing water), and adjacent less prominent partial rings, which have been shown to coincide with maxima in horizontal gravity gradients and a topographic depression. These observations, along with the discreteness and spacing of the features, suggest a formation mechanism involving faulting in the outer slump zone of the crater, which would thus have a diameter of approximately 180 km.
An opposing view, based primarily on the interpretation of gravity data, is that (he crater is much larger than the cenote ring implies. Given the association of the known cenote ring with faults, we here examine northern Yucatan for similar rings in gravity, surface features and elevation, which we might expect to be associated with outer concentric faults in the case of a larger, possibly multiring, structure.
No such outer rings have been found, although definite patterns are seen in the distribution of karst features outside the crater rim. We explain these patterns as resulting mainly from deformation related to the block fault zone that parallels tbe shelf edge of eastern Yucatan.