On the survivability of an enantiomeric excess of amino acids in comet nuclei during the decay of26Al and other radionuclides

We present a computer model calculation for the racemization of a possible excess of amino acids in the icy fraction of comet nuclei bring about by ionizing radiation released during the decay of²⁶Al,⁴⁰K,²³⁵U,²³⁸U and²³²Th. The model takes into account a total of 110 chemical reactions, of which 91 are needed to explain the radiation chemical processing of the major constituents of comet nuclei (Navarro-Gonzálezet al., 1992) and 19 are necessary to simulate the radiolysis of glycine/alanine mixtures in aqueous solutions (Navarro-Gonzálezet al., 1994 and 1996). It is predicted that an enantiomeric excess of alanine would not be destroyed by radioracemization during the decay of embedded radionuclides. Nevertheless, this enantiomeric excess could be attenuated by the formation of racemic amino acids in the interior of comet nuclei as a result of the radiation-induced polymerization of HCN.     

Trace elements contamination of agricultural soils affected by sulphide exploitation (Iberian Pyrite Belt,Sw Spain)

Agricultural soils of the Riotinto mining area (Iberian Pyrite Belt) have been studied to assess the degree of pollution by trace elements as a consequence of the extraction and treatment of sulphides. Fifteen soil samples were collected and analysed by ICP-OES and INAA for 51 elements. Chemical analyses showed an As–Cu–Pb–Zn association related with the mineralisation of the Iberian Pyrite Belt. Concentrations were 19–994 mg kg⁻¹ for As, 41–4,890 mg kg⁻¹ for Pb, 95–897 mg kg⁻¹ for Zn and of 27–1,160 mg kg⁻¹ for Cu. Most of the samples displayed concentrations of these elements higher than the 90th percentile of the corresponding geological dominium, which suggests an anthropogenic input besides the bedrock influence. Samples collected from sediments were more contaminated than leptosols because they were polluted by leachates or by mining spills coming from the waste rock piles. The weathering of the bedrock is responsible for high concentrations in Co, Cr and Ni, but an anthropogenic input, such as wind-blown dust, seems to be indicative of the high content of As, Cu, Pb and Zn in leptosols. The metal partitioning patterns show that most trace elements are associated with Fe amorphous oxy-hydroxides, or take part of the residual fraction. According to the results obtained, the following mobility sequence is proposed for major and minor elements: Mn, Pb, Cd, > Zn, Cu > Ni > As > Fe > Cr. The high mobility of Pb, Cu and Zn involve an environmental risk in this area, even in soils where the concentrations are not so high.     

Response of zooid size in Cupuladria exfragminis (Bryozoa) to simulated upwelling temperatures

We investigate the effect of the temperature–size rule upon zooids of the tropical American bryozoan Cupuladria exfragminis. Results show that mean zooid length, zooid width and zooid area vary significantly between clonal replicates of C. exfragminis kept under different controlled temperature conditions. Significantly larger zooids are produced during times of lowered water temperature that are comparable with the temperatures that occur during seasonal upwelling along the Pacific coast of Panama where the animal lives in abundance. Interpolation of data suggests that a drop of 1 °C causes a 5% increase in zooid size, and that almost all variation in zooid size in natural populations can be explained by temperature. Results are discussed in context of the potential use of zooid size variation in cupuladriid bryozoans to measure the strength of seasonal upwelling in ancient seas by analysing zooid size changes in fossil colonies. The technique of cloning cupuladriid colonies by fragmentation is also discussed with reference to its benefits in experimental studies where genotypes need to be controlled or replicated.     

Hydrochemical and isotopical tracers in the lacustrine aquifer of the Cerro Prieto area, Baja California, México

A series of patterns in the chemical and isotopic composition of the groundwater of the Cerro Prieto area have been recognized. These patterns were used to define four hydrochemical and isotopical zones in the area. One of these areas located at the east side was found to be the source of recharge, while another in the central part is where an older aquifer exist in lacustrine deposits. The low permeability of the area causes the aquifer to act as an aquitard, which at least is partly surrounded by an interface zone where mixing of waters occurs. Tritium and radiocarbon method revealed that the aquitard is an isolate system whose residence time is of 32 ka.     

Rock magnetic evidence of inflation of a flood basalt lava flow

The anisotropy of magnetic susceptibility (AMS) of lava flows is an innovative method which has been proved to be directly related to the shear history of lava. One of the advantages of this method is that it can be used in the absence of other morphological features commonly employed to study the mechanism of emplacement of lava flows. This feature of the AMS method makes it very attractive to gain insight into the mechanism of emplacement of massive, relatively featureless, long lava flows such as those forming flood basalt provinces. In this work, we report the results of the measurement of AMS as a function of vertical position within the Birkett lava flow, one of the Columbia River Basalt Group flows. The observed variation of AMS allows us to identify at least 16 discrete events of lava injection and to estimate the thickness of individual injection events. The AMS-estimated thickness of each injection event (in the range of 0.5-4.0 m) coincides with the range inferred for injected lava pulses in modern Hawaiian lava flows. Thus, the evidence provided by the AMS method supports the notion that at least some flood basalt lava flows were emplaced by the same mechanism as many present-day inflated pahoehoe flows. Regarding the orientation of the principal susceptibilities, in the central part of the flow they define a preferred orientation along an E-W trend, whereas in the outer parts of the flow they have a NNE-SSW trend. This difference in the orientation of the principal susceptibilities is interpreted as the result of a change of flow direction of the lava as emplacement progressed. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/10.1007/s00445-002-0203-8.     

A Cambrian mixed carbonate–siliciclastic platform in SW Gondwana: evidence from the Western Sierras Pampeanas (Argentina) and implications for the early Paleozoic paleogeography of the proto-Andean margin

International Journal of Earth Sciences - The Western Sierras Pampeanas (WSP) of Argentina record a protracted geological history from the Mesoproterozoic assembly of the Rodinia supercontinent to...     

Welcome mats? The role of seagrass meadow structure in controlling post-settlement survival in a keystone sea-urchin species

Processes acting on the early-life histories of marine organisms can have important consequences for the structuring of benthic communities. In particular, the degree of coupling between larval supply and adult abundances can wield considerable influence on the strength of trophic interactions in the ecosystem. These processes have been relatively well described in rocky systems and soft-sediment communities, and it is clear that they are governed by very different bottlenecks. Seagrass meadows make interesting study systems because they bear structural affinities to both soft sediments as well as rocky substrates. We examined the early-life history of Paracentrotus lividus, one of the dominant herbivores in Mediterranean seagrass meadows, to identify the drivers of population dynamics in this species. We measured spatial and temporal variability in sea urchin post-settlement in 10 Posidonia oceanica meadows in the North-Western Mediterranean over a period of two years, and compared the numbers with the one-year old cohort a year later (i.e. the new population recruitment) as well as between successive size–age groups. Urchin post-settlers differed substantially between meadows but were present in both years in all meadows surveyed, suggesting that larval supply was not limiting for any of the studied sites. However, in six of the studied meadows, the one-year cohort of urchins was absent in both years, indicating that post-settlement processes strongly affected urchins in these meadows. In contrast, in four of the studied meadows, there was a strong coupling between post-settlers and one-year cohort individuals. These meadows were structurally different from the others in that they were characterised by an exposed matrix of rhizomes forming a dense seagrass mat. This mat apparently strongly mediates post-settlement mortality, and its presence or absence dictates the successful establishment of urchin populations in seagrass meadows. As the population aged, the relationship between size–age groups decreased evidencing the action of other processes. Yet, these results indicate that differences in physical structure are a vital bottleneck for sea urchin populations in seagrass meadows. Exploring the interaction between ecosystem structure and early-life history may provide a broader and more unified framework to understand the dynamics of a range of benthic habitats, including rocky substrates, soft sediments and seagrass meadows.     

Anisotropy of magnetic susceptibility parameters: Guidelines for their rational selection

Twenty-eight parameters used to characterize measurements of the anisotropy of magnetic susceptibility are compared theoretically in this work by introducing the concept of the field of susceptibility tensors, which allows the representation of parameters as families of lines in a plane. It is demonstrated that the foliation and lineation parameters are but a special case of the shape parameters, implying that the resolution of these two rock fabric elements using AMS measurements alone is more an artifact of the numerical range of definition of some parameters than a quantification of two physically independent features. Also, it is shown that parameters presumably of the same type do not necessarily yield equivalent interpretation of results in a qualitative sense, and therefore, caution should be strongly exercised when parameters are to be selected. Paramters quantifying the degree of anisotropy are, in general, equivalent to each other because of the very small departure observed in natural rocks from the isotropic case. However, a final consideration of the possible ability to differentiate rock types and a convenient range of values allowing expression of the degree of anisotropy in a well-defined percentage are pointed out as the main factors to be considered before selecting one parameter within this class.     

3D chemical model for geological macromolecules

This study defines a chemical representation of the kerogen macromolecule based on data from physicochemical analyses. The model should permit: creation of various schematic drawings representing an average macromolecule; future integration of new analytical results (for instance on structures of biomarkers or biopolymers); and determination of the distribution of chemical bonds.The models developed in this study can be represented in a 3D space, using classical chemical symbols, in the form of cyclic groups linked to each other by aliphatic chains. One cyclic group is a connected set of aromatic, naphthenoaromatic or naphthenic rings. These cyclic groups are constructed using basic elements such as atoms and bonds defined by their length and direction.Modeling of kerogen is done in three successive steps. A library is first created to define atoms, bonds and cyclic groups. Secondly, starting from a set of equations describing the analytical results, cyclic and aliphatic groups are chosen in the appropriate stoechiometric amount to match the analytical data. Finally the construction is done: cyclic groups are placed randomly in a 3D space, connections are made by aliphatic chains, and functional groups are added.The molecular modeling software Xmol^TM can be operated on APOLLO stations. It allows the creation of libraries, the calculation of chemical bonds corresponding to the analyses and the construction of macromolecules. An example is given for a type III kerogen at the beginning of diagenesis.