Shear behavior of geotextile-reinforced Chlef sand in the Mediterranean region: Laboratory investigation

Abstract

An experimental study about the effects of initial conditions of soil and geotextile reinforcement on the mechanical behavior of reinforced sand is presented in this paper. A series of direct shear tests are conducted on reconstituted specimens of dry and moist natural sand prepared with different initial water content (w?=?0, 1.5, 3, and 5%) and including the two arrangements of geotextile layers (one and two layers, respectively). Both S41 and PEC55types of non-woven geotextile were used and placed at different heights of the specimens to investigate the effect of geotextile reinforcement on the behavior of sand. Test specimens were prepared at Dr =80% of relative density and were subjected to three different normal stresses of 100, 200, and 300?kPa. The experimental results showed that the deposition mode (wet and dry) and the geotextile reinforcement have significant effects on the behavior of reinforced sand. The increase in shear strength is relatively more significant for specimens prepared with dry deposition mode as compared to those prepared with wet deposition mode and it increases with the number of geotextile layers, this effect becomes less significant for wet specimens. The experimental results also demonstrated that (PEC55) non-woven geotextile shows a better performance than the (S41) of geotextile. These results can be explained by the effective tensile strength property of polyester yarns of the (PEC55) non-woven geotextile that it has led to a significant increase in the shear strength.     

Laboratory assessment of saturation and sample molding effects on shear resistance and mechanical characteristics of sandy soil

In order to evaluate shear resistance characteristics of sand, which has previously experienced liquefaction, two series of drained and undrained monotonic triaxial compression tests on medium dense sand were carried out. In the first test series, the influence of the specimen preparation method and confining pressure has been studied. It was found that there was a marked difference in the behavior even though the density and stress conditions were identical. The conclusion was that the soil fabric was responsible for this result. In the second series of tests, the saturation influence on the shear resistance of the sand was examined. The results showed that the decrease in Skempton's pore pressure coefficient B improves the shear resistance and increases the friction angle of the sand.     

Modelling of cement suspension flow in granular porous media

A theoretical model of cement suspensions flow in granular porous media considering particle filtration is presented in this paper. Two phenomenological laws have been retained for the filtration rate and the intrinsic permeability evolution. A linear evolution with respect to the volume fraction of cement in the grout has been retained for the filtration rate. The intrinsic permeability of the porous medium is looked for in the form of a hyperbolic function of the porosity change. The model depends on two phenomenological parameters only. The equations of this model are solved analytically in the one‐dimensional case. Besides, a numerical resolution based on the finite element method is also presented. It could be implemented easily in situations where no analytical solution is available. Finally, the predictions of the model are compared to the results of a grout injection test on a long column of sand. Copyright © 2005 John Wiley & Sons, Ltd.     

Effects of water and fines contents on the resilient modulus of the interlayer soil of railway substructure

This paper deals with the resilient behavior of the interlayer soil which is created mainly by the interpenetration of ballast and subgrade soils. The interlayer soil studied was taken from a site in the southeast of France. Large-scale cyclic triaxial tests were carried out at three water contents (w = 4, 6 and 12 %) and three fines contents corresponding to 5, 10 % subgrade added to the natural interlayer soil and 10 % fine particles (<80 μm) removed from the natural interlayer soil. Soil specimens underwent various deviator stresses, and for each deviator stress, a large number of cycles was applied. The effects of deviator stress, number of cycles, water content and fines content on the resilient modulus (M _r) were analyzed. It appears that the effects of water content and fines content must be analyzed together because the two effects are closely linked. Under unsaturated conditions, the soil containing high fines content has higher resilient modulus due to the contribution of suction. When the soil approaches the saturated state, it loses its mechanical enhancement with a sharp decrease in resilient modulus.     

Undrained behaviour of polypropylene fibre reinforced sandy soil under monotonic loading

Soil improvement using fibres is widely used in soil stabilisation to prevent sand liquefaction. In order to study the undrained behaviour and liquefaction resistance of sand reinforced with polypropylene fibres, a series of triaxial compressive tests were conducted on unreinforced and reinforced Chlef sand with different contents of polypropylene fibres (0, 0.3, 0.5 and 0.8%). Samples were prepared at 30% and 80% relative densities representing loose and dense states respectively, and triaxial tests were performed at confining pressures of 50, 100 and 200 kPa. Tests results show that fibre inclusion has a significant effect on the shear strength and dilation of sandy soil. The increase in strength is function of fibre content, relative density and confining pressure. The maximum strength improvement for both loose and dense fibre-reinforced sand is more pronounced at higher confining pressure and at higher fibre content.     

Undrained Monotonic Response and Instability of Medium-Dense Sandy Soil

A series of undrained monotonic triaxial compression tests were performed on natural, medium-dense (relative density (RD) = 50%) Chlef sand containing 0.5% of non-plastic fines, under different confining pressures of 50 kPa, 100 kPa, and 200 kPa. This article focuses on distinctive states of the monotonic undrained response of sands, namely the critical state, the phase transformation state, the quasi-steady state, and the state of undrained instability (onset of flow liquefaction). Specimens were prepared using dry funnel pluviation and wet deposition to investigate the effect of the initial sand fabric on these states. The present data suggest that the initial fabric of the sand appears to have a significant effect on the undrained behavior in the early stages of shearing, with its influence vanishing at large strains. Wet deposition specimens demonstrate considerably larger undrained instability state strength than their dry funnel pluviation counterparts, and a unique critical state locus is reached by both dry funnel pluviation and wet deposition.     

Modeling the suction- and deviator stress-dependent resilient modulus of unsaturated fine/coarse soil mixture by considering soil–water retention curve

Experimental observations have shown that the resilient modulus M_r of fine/coarse soil mixture can be significantly affected by the coarse grain content f_v, deviator stress σ_d and suction \(\psi\). In this study, a constitutive model incorporating the soil–water retention curve (SWRC) was proposed to describe the effects of \(\psi\) and \(\sigma_{{\text{d}}}\) on M_r. This model was then extended to the effect of f_v. The proposed model implied the resilient modulus at saturation condition (M_r-sat), the resilient modulus at optimum moisture content (OMC) condition (M_r-opt), the suction at OMC (\(\psi_{{{\text{opt}}}}\)) and the parameters related to SWRC. The model was validated using experimental data from five studies reported in the literature. Comparisons with three representative existing models showed that the proposed model was capable to well describe the suction-dependent effect of deviator stress in the full range of suction, while the existing models gave satisfactory simulation results only in the low suction range. Indeed, experimental studies revealed that there was a threshold suction \(\psi_{{{\text{th}}}}\), and with increasing \(\sigma_{{\text{d}}}\), the M_r decreased when \(\psi < \psi_{{{\text{th}}}}\), but increased when \(\psi > \psi_{{{\text{th}}}}\). When \(\psi < \psi_{{{\text{th}}}}\), all models gave good simulations. On the contrary, when \(\psi > \psi_{{{\text{th}}}}\), only the proposed model gave good simulations, in particular when \(\psi_{{{\text{th}}}} > \psi_{{{\text{opt}}}}\). This showed the performance of the proposed model in describing the variation in resilient modulus of unsaturated fine/coarse soil mixtures with changes in coarse grain content, deviator stress and suction.