Height dependence of the amplitudes of solar oscillations viewed with a potassium resonance scattering spectrometer

Over the course of the year, the variation in the solar line-of-sight velocity causes a change in the heights in the photosphere which are analysed by the red and blue passbands of a resonance scattering spectrometer. This in turn would be expected to produce a variation in the ratio of acoustic amplitudes measured in each passband. Using data from the Tenerife spectrometer of the Birmingham Solar Oscillations Network (BiSON), we demonstrate such a seasonal change. We then use the Eddington-Barbier approximation and an atmospheric model to convert the magnitude of this trend in velocity ratio with line-of-sight velocity into an approximate value of 580 km for the velocity-amplitude scale height. However, a simple argument suggests that Doppler imaging causes this to be an overestimate of the true value.     

Spectral analyses of solar photospheric fluctuations

Successful subtraction of instrumental background variations has permitted spectral analyses of two-dimensional measurement arrays of granulation brightness fluctuations at the center of the disk, arrays obtained from Stratoscope I, 1959B-flight, high-resolution frames B1551 and B3241.

1. RMS's, uncorrected for instrumental blurring, are 0.0850 of mean intensity for B1551 and 0.0736 for B3241, somewhat higher than other determinations. These between-frame and between-investigation differences probably result from a combination of calibration errors, frame resolution differences, and, most likely, granulation pattern differences.
2. Significant variations over each array of mean intensities and RMS's, determined for sub-arrays with dimensions in the 2500–10000 km range, indicate spatial brightness and RMS variations larger than the ‘scale’ of the granulation pattern, supporting a turbulent interpretation of photospheric convection.
3. One-dimensional power-spectra shapes provide objective and discriminating criteria for determining granulation pattern differences and, possibly, frame resolution.
4. Two-dimensional power spectra show small, essentially random deviations from axial symmetry which lie almost entirely within the 50% confidence limits.
5. Spectral densities and fluctuation power spectra, computed from the two-dimensional power spectra and corrected for instrumental blurring, noise, and blemishes, have a useable radial wavenumber range nearly double that of earlier Stratoscope I analyses.
6. Corrected RMS's obtained from the corrected fluctuation power spectra, 0.145 ± 0.046 for B1551 and 0.136 ± 0.048 for B3241, depend critically on the accuracy of the correction.
7. The spectra's wavenumber range includes the granulation-fluctuation-producing domain but not the Kolmogoroff domain of turbulence spectra.

     

Quality Assessment Of Digital Surface Models Generated From IKONOS Imagery

The growing applications of digital surface models (DSMs) for object detection, segmentation and representation of terrestrial landscapes have provided impetus for further automation of 3D spatial information extraction processes. While new technologies such as lidar are available for almost instant DSM generation, the use of stereoscopic high-resolution satellite imagery (HRSI), coupled with image matching, affords cost-effective measurement of surface topography over large coverage areas. This investigation explores the potential of IKONOS Geo stereo imagery for producing DSMs using an alternative sensor orientation model, namely bias-corrected rational polynomial coefficients (RPCs), and a hybrid image-matching algorithm. To serve both as a reference surface and a basis for comparison, a lidar DSM was employed in the Hobart testfield, a region of differing terrain types and slope. In order to take topographic variation within the modelled surface into account, the lidar strip was divided into separate sub-areas representing differing land cover types. It is shown that over topographically diverse areas, heighting accuracy to better than 3 pixels can be readily achieved. Results improve markedly in feature-rich open and relatively flat terrain, with sub-pixel accuracy being achieved at check points surveyed using the global positioning system (GPS). This assessment demonstrates that the outlook for DSM generation from HRSI is very promising.     

Hyper Redundancy for Accuracy Enhancement in Automated Close Range Photogrammetry

A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ  = 0·065 mm, or 1/400 000 of the diameter of the reflector.     

Method of Data Reduction and Uncertainty Estimation for Platinum-Group Element Data Using Inductively Coupled Plasma-Mass Spectrometry

A data reduction method is described for determining platinum-group element (PGE) abundances by inductively coupled plasma-mass spectrometry (ICP-MS) using external calibration or the method of standard addition. Gravimetric measurement of volumes, the analysis of reference materials and the use of procedural blanks were all used to minimise systematic errors. Internal standards were used to correct for instrument drift. A linear least squares regression model was used to calculate concentrations from drift-corrected counts per second (cps). Furthermore, mathematical manipulations also contribute to the uncertainty estimates of a procedure. Typical uncertainty estimate calculations for ICP-MS data manipulations involve: (1) Carrying standard deviations from the raw cps through the data reduction or (2) calculating a standard deviation from multiple final concentration calculations. It is demonstrated that method 2 may underestimate the uncertainty estimate of the calculated data. Methods 1 and 2 do not typically include an uncertainty estimate component from a regression model. As such models contribute to the uncertainty estimates affecting the calculated data, an uncertainty estimate component from the regression must be included in any final error calculations. Confidence intervals are used to account for uncertainty estimates from the regression model. These confidence intervals are simpler to calculate than uncertainty estimates from method 1, for example. The data reduction and uncertainty estimation method described here addresses problems of reporting PGE data from an article in the literature and addresses both precision and accuracy. The method can be applied to any analytical technique where drift corrections or regression models are used.     

A Reappraisal of Rb, Y, Zr, Pb and Th Values in Geochemical Reference Material BHVO-1

The geochemical reference material BHVO-1 was analysed by a variety of techniques over a six year period. These techniques included inductively coupled plasma-mass spectrometry and atomic emission spectroscopy (ICP-MS and ICP-AES, respectively), laser ablation ICP-MS and spark source mass spectroscopy. Inconsistencies between the published consensus values reported by Gladney and Roelandts (1988, Geostandards Newsletter) and the results of our study are noted for Rb, Y, Zr, Pb and Th. The values reported here for Rb, Y, Zr and Pb are generally lower, while Th is higher than the consensus value. This is not an analytical artefact unique to the University of Notre Dame ICP-MS facility, as most of the BHVO-1 analyses reported over the last ten to twenty years are in agreement with our results. We propose new consensus values for each of these elements as follows: Rb = 9.3 ± 0.2 μg g-1 (compared to 11 ± 2 μg g-1), Y = 24.4 ± 1.3 μg g-1 (compared to 27.6 ± 1.7 μg g-1), Zr = 172 ± 10 μg g-1 (compared to 179 ± 21 μg g-1), Pb = 2.2 ± 0.2 μg g-1 (compared to 2.6 ± 0.9 μg g-1) and Th = 1.22 ± 0.02 μg g-1 (compared to 1.08 ± 0.15 μg g-1).     

Characterisation of Memory Effects and Development of an Effective Wash Protocol for the Measurement of Petrogenetically Critical Trace Elements in Geological Samples by ICP-MS

High sensitivity and low detection limits would seem to make inductively coupled plasma-mass spectrometry (ICP-MS) an ideal analytical tool for determining low (sub-μg g^-1) concentrations of the rare earth elements (REE), Y, Zr, Nb, Hf, Ta, Sn, W, Mo, Th, and U in most mafic materials (e.g. Hall and Plant 1992). However, the generally "sticky" nature exhibited by most of the high field strength elements (HFSEs: Zr, Nb, Hf, Ta, Th and U) as well as Sn, W and Mo can result in spurious results due to memory effects transmitted between unknowns and calibration samples. This, in turn, can seriously compromise the sensitivity, accuracy, and precision of ICP-MS analyses for these elements in geological materials. Data resulting from analyses with poor accuracy and precision can lead to erroneous interpretation and misleading petrogenetic modelling. To resolve this problem, we propose an effective wash protocol for these critical trace elements.     

Transfer of Taiwanese ideas and technology to The Gambia, West Africa: a viable approach to rural development?

The development of Taiwan's agricultural sector contributed significantly to the country's transformation from virtual poverty after World War II to a modern industrial nation. Success resulted from the use of appropriate technologies, developed through an exceptionally close working relationship between government, research and development institutions, extension services and farmers in Taiwan. As part of their overseas development aid programme, the Republic of China on Taiwan has established Technical Missions in those developing countries where it receives political recognition. Among these is The Gambia, West Africa, where one focus of Taiwan's current Technical Mission is the development of women's market gardens. Although the gardens have proved successful, there is doubt as to whether their achievements will be sustained once Taiwan's Technical Mission in The Gambia has ended. Field research in Taiwan and in The Gambia, based largely on participatory techniques, has revealed that the low-tech methods introduced from Taiwan are appropriate for the Gambian environment. However, much depends on whether women participating in the schemes can commit sufficient time and energy to the gardens, as at present this is a limiting factor. The potential of the gardens may also be constrained by a lack of appropriate institutional infrastructure, particularly the scope for profitable disposal of garden produce. A major conclusion of the article is that successful transfer of appropriate technology to The Gambia is likely to be impeded by poorly developed coordination between groups that proved to be key 'players' in the development of agriculture in Taiwan: government, research and development institutions, extension services and producers.