Water availability for the greening of Kuwait

Water resources for agricultural development and landscape enhancement in Kuwait are very scarce; the quality is saline (brackish), and the soil texture is sandy, incapable of holding nutrients and moisture. Most of the rainfall in Kuwait either evaporates due to the high temperatures or percolates through the soil. The rainfall is not sufficient to recharge the underground water supply. A variety of alternative water sources have been studied, including seawater desalination and wastewater treatment. Wastewater treatment proved to be convenient due to the relatively low salinity detected in the treated water. Furthermore, the amount of wastewater is expected to increase as more residential areas are connected to the sewage system as the population increases.

The development of a greenery plan for Kuwait requires intensive water management. This goal can be achieved through manpower training in landscape development, selection of plants tolerant to arid environments, usage of appropriate irrigation and drainage systems, promotion of greenery programs within public and the governmental agencies for their direct participation in urban area beautification, and extension of wastewater treatment techniques.     

Groundwater resources evaluation in calcareous limestone using geoelectrical and VLF-EM surveys (El Salloum Basin,Egypt)

Understanding and developing groundwater resources in arid regions such as El Salloum basin, along the northwestern coast of Egypt, remains a challenging issue. One-dimensional (1D) electrical sounding (ES), two-dimensional (2D) electrical resistivity imaging (ERI), and very low frequency electromagnetic (VLF-EM) measurements were used to investigate the hydrogeological framework of El Salloum basin with the aim of determining the potential for extraction of potable water. 1D resistivity sounding models were used to delineate geoelectric sections and water-bearing layers. 2D ERI highlighted decreases in resistivity with depth, attributed to clay-rich limestone combined with seawater intrusion towards the coast. A depth of investigation (DOI) index was used to constrain the information content of the images at depths up to 100 m. The VLF-EM survey identified likely faults/fractured zones across the study area. A combined analysis of the datasets of the 1D ES, 2D ERI, and VLF-EM methods identified potential zones of groundwater, the extent of seawater intrusion, and major hydrogeological structures (fracture zones) in El Salloum basin. The equivalent geologic layers suggest that the main aquifer in the basin is the fractured chalky limestone middle Miocene) south of the coastal plain of the study area. Sites likely to provide significant volumes of potable water were identified based on relatively high resistivity and thickness of laterally extensive layers. The most promising locations for drilling productive wells are in the south and southeastern parts of the region, where the potential for potable groundwater increases substantially.

     

A strip adjustment procedure to mitigate the impact of inaccurate mounting parameters in parallel lidar strips

Lidar (laser scanning) technology has been proven as a prominent technique for the acquisition of high-density and accurate topographic information. Because of systematic errors in the lidar measurements (drifts in the position and orientation information and biases in the mirror angles and ranges) and/or in the parameters relating the system components (mounting parameters), adjacent lidar strips may exhibit discrepancies. Although position and orientation drifts can have a more significant impact, these errors and their impact do not come as a surprise if the quality of the GPS/INS integration process is carefully examined. Therefore, the mounting errors are singled out in this work. The ideal solution for improving the compatibility of neighbouring strips in the presence of errors in the mounting parameters is the implementation of a rigorous calibration procedure. However, such a calibration requires the original observations, which may not be usually available. In this paper, a strip adjustment procedure to improve the compatibility between parallel lidar strips with moderate flight dynamics (for example, acquired by a fixed-wing aircraft) over an area with moderately varying elevation is proposed. The proposed method is similar to the photogrammetric block adjustment of independent models. Instead of point features, planar patches and linear features, which are represented by sets of non-conjugate points, are used for the strip adjustment. The feasibility and the performance of the proposed procedure together with its impact on subsequent activities are illustrated using experimental results from real data.     

Microwave Remote Sensing of the Temperature and Distribution of Sulfur Compounds in the Lower Atmosphere of Venus

A multi-wavelength radio frequency observation of Venus was performed on April 5, 1996, with the Very Large Array to investigate potential variations in the vertical and horizontal distribution of temperature and the sulfur compounds sulfur dioxide (SO₂) and sulfuric acid vapor (H₂SO₄(g)) in the atmosphere of the planet. Brightness temperature maps were produced which feature significantly darkened polar regions compared to the brighter low-latitude regions at both observed frequencies. This is the first time such polar features have been seen unambiguously in radio wavelength observations of Venus. The limb-darkening displayed in the maps helps to constrain the vertical profile of H₂SO₄(g), temperature, and to some degree SO₂. The maps were interpreted by applying a retrieval algorithm to produce vertical profiles of temperature and abundance of H₂SO₄(g) given an assumed sub-cloud abundance of SO₂. The results indicate a substantially higher abundance of H₂SO₄(g) at high latitudes (above 45°) than in the low-latitude regions. The retrieved temperature profiles are up to 25 K warmer than the profile obtained by the Pioneer Venus sounder probe at altitudes below 40 km (depending on location and assumed SO₂ abundance). For 150 ppm of SO₂, it is more consistent with the temperature profile obtained by Mariner 5, extrapolated to the surface via a dry adiabat. The profiles obtained for H₂SO₄(g) at high latitudes are consistent with those derived from the Magellan radio occultation experiments, peaking at around 8 ppm at an altitude of 46 km and decaying rapidly away from that altitude. At low latitudes, no significant H₂SO₄(g) is observed, regardless of the assumed SO₂ content. This is well below that measured by Mariner 10 (Lipa and Tyler 1979, Icarus39, 192-208), which peaked at ∼14 ppm near 47 km. Our results favor ≤100 ppm of SO₂ at low latitudes and ≤50 ppm in polar regions. The low-latitude value is statistically consistent with the results of Bézard et al. (1983, Geophs. Res. Lett.20, 1587-1590), who found that a sub-cloud SO₂ abundance of 130±40 ppm best matched their observations in the near-IR. The retrieved temperature profile and higher abundance of H₂SO₄(g) in polar regions are consistent with a strong equatorial-to-polar, cloud-level flow due to a Hadley cell in the atmosphere of Venus.     

Petrology and geochemistry of feldspathic impact‐melt breccia Abar al' Uj 012, the first lunar meteorite from Saudi Arabia

Abar al' Uj (AaU) 012 is a clast‐rich, vesicular impact‐melt (IM) breccia, composed of lithic and mineral clasts set in a very fine‐grained and well‐crystallized matrix. It is a typical feldspathic lunar meteorite, most likely originating from the lunar farside. Bulk composition (31.0 wt% Al₂O₃, 3.85 wt% FeO) is close to the mean of feldspathic lunar meteorites and Apollo FAN‐suite rocks. The low concentration of incompatible trace elements (0.39 ppm Th, 0.13 ppm U) reflects the absence of a significant KREEP component. Plagioclase is highly anorthitic with a mean of An_96.9Ab_3.0Or_0.1. Bulk rock Mg# is 63 and molar FeO/MnO is 76. The terrestrial age of the meteorite is 33.4 ± 5.2 kyr. AaU 012 contains a ~1.4 × 1.5 mm² exotic clast different from the lithic clast population which is dominated by clasts of anorthosite breccias. Bulk composition and presence of relatively large vesicles indicate that the clast was most probably formed by an impact into a precursor having nonmare igneous origin most likely related to the rare alkali‐suite rocks. The IM clast is mainly composed of clinopyroxenes, contains a significant amount of cristobalite (9.0 vol%), and has a microcrystalline mesostasis. Although the clast shows similarities in texture and modal mineral abundances with some Apollo pigeonite basalts, it has lower FeO and higher SiO₂ than any mare basalt. It also has higher FeO and lower Al₂O₃ than rocks from the FAN‐ or Mg‐suite. Its lower Mg# (59) compared to Mg‐suite rocks also excludes a relationship with these types of lunar material.     

Hydrodynamic conditions and karst formation in the northwest part of Syria

The study of hydrodynamic zonation and karst formation in the northwest part of Syria is a topical hydrogeological problem. It is important to trace the history of karst formation and evaluate the spread of karst structures in the area and the rate of development of karst processes, as well as their influence on water supplies and irrigation. The solution of this problem was performed by integrated geophysical methods (electric and seismic exploration works) and data analysis of well-drilling, geological, hydro-geological, and subsurface territory explorations. The most detailed works were done near Ras Al-Ain. This paper is devoted to the results of the study of hydrodynamic conditions and karst formation.     

Estimation of aquifer hydraulic parameters from surface geophysical measurements: a case study of the Upper Cretaceous aquifer, central Sinai, Egypt

The integration of geophysical data with direct hydrogeological measurements can provide a minimally invasive approach to characterize the subsurface at a variety of resolutions and over many spatial scales. The field of hydrogeophysics has attracted much attention during the last two decades. In this domain, the geophysical data inverted to geophysical models are interpreted in terms of the hydrogeology to serve as a basis for the definition of hydraulic models in the areas of interest. The hydraulic conductivity (K) value measured in a reference borehole has been combined with the electrical conductivity obtained from nearby geo-electromagnetic sounding data in the Cenomanian (Upper Cretaceous) aquifer, central Sinai, Egypt. The resulting relation was interpreted with Dar Zarrouk parameters to infer the transmissivity variations at other vertical electrical sounding locations, where K values are unknown. Coincident transient electromagnetic data have been adopted to increase accuracy while interpreting the aquifer geoelectrical properties. The results indicate that the transmissivity values in the aquifer of interest vary from 2,446 to 9,694 m²/day, and K varies from 12.9 to 57.0 m/day throughout the studied area.     

Mapping and attenuation of surface waves side scattered by near-surface diffractors

Near-surface diffractors are one of the problems in land seismic exploration. They can scatter the surface wave energy emanating from the seismic source and contaminate the signal received by seismic receivers. The scattered energy from the near-surface diffractors manifests itself on seismic shot gathers as strong hyperbolic events, called diffractions, masking the weakly reflected body waves. Diffractions present complications to most of surface-wave suppression schemes, especially when they have been scattered by scatterers outside the receiver line. Different methods have been used to eliminate diffractions from seismic data, including geophone arrays, filtering, and inverse scattering. Each of those methods has its own limitations. In this study, we present processing algorithms to map and attenuate near-surface diffractors of surface waves in seismic shot gathers. The mapping algorithm is based on semblance measurements and time–offset relations, while the attenuation algorithm is based on the least-square fitting of a source wavelet. The algorithms are applied on synthetic data from two different models. The first model has three near-surface diffractors, while the second model has three clusters of near-surface diffractors. Each cluster consists of three near-surface diffractors with a different geometry for each cluster. The results show that the proposed algorithms are successful in locating and attenuating most near-surface diffractors, except when the separation between individual diffractors is below the wavelength of the diffracted surface wave.     

Electrical and electromagnetic surveys to locate possible causes of water seepage to ground surface at a quarry open pit near Helwan city,Egypt

Water seepage to ground surface at a limestone quarry located at Wadi Garawy about 20 km south-east of Helwan city in Egypt posed a real threat to the mining activity at the quarry. The quarry area is known to be very dry for decades and away from water utilities and infrastructures that may cause water leaks to the quarry. Geophysical investigation including 1D Vertical Electrical Sounding (VES), 2D Electrical Resistivity Tomography (ERT) and 1D Transient Electromagnetic (TEM) surveys were conducted to characterize the rock sequence and locate what could be a possible source of water seepage to the quarry. The resistivity profiles generated from the VES and TEM surveys mapped the rock units in the area down to depths exceeded 100 m. The ERT profiles acquired from the quarrying zone close to the water seepage spot have imaged the top of groundwater level at few meters below the ground surface at the quarry open pit. The spot of groundwater seepage seemed to occur at an area of limestone dissolution that were filled by finer sediments. The finer sediments acted as a hydrological conduit that allowed an upward seepage of groundwater to ground surface under the capillary action effect.     

Discussion of “Interfacing the geographic information system,remote sensing,and the soil conservation service-curve number method to estimate curve number and runoff volume in the ASIR region of Saudi Arabia” by Fawzi S. Mohammad,Jan Adamowski

The soil conservation service curve number (SCS-CN) method is one of the most commonly used methods to compute the direct runoff from a rainfall event. Since the method was established, numerous researches were undertaken to improve the method through accurate estimation of its parameter and especially the curve number (CN). However, the essence of the SCS method, as an event-based Hortonian mechanism method, remained unchanged. The main assumption of the method related to the rainfall input is that the rainfall is continuous in time and uniform over the watershed. Mohammad and Adamowski (2015) paper apparently used the SCS method to estimate the annual runoff using the annual rainfall as one cumulative rainfall input value, which is a violation of the event-based principle of the method and of the assumption of the continuity of the rainfall event.To re-estimate the average annual runoff more realistically for the Asir region, Saudi Arabia, daily rainfall data from 14 rainfall stations are used for calculating the resulting runoff depths, on a daily event-by-event rainfall basis, throughout the whole simulation period. The resulting runoff depths are added for each year, and the total cumulative annual runoff values for each year are averaged to get the average annual runoff. The runoff values based on the previously mentioned procedure are an upper limit of the actual average annual runoff as the underlying SCS equations discard evaporation and similar long-term losses. Nevertheless, the average runoff values obtained in the discussion paper are an order of magnitude (at least five to tenfold) lower than the ones of the original paper. An equation is proposed to obtain a more realistic estimate of the average annual runoff, to be used with the average annual rainfall as an input, if the annual value is the only available rainfall information.