Radiomagnetotelluric mapping, groundwater numerical modelling and 18-Oxygen isotopic data as combined tools to determine the hydrogeological system of a landslide prone area

Three methods were combined to determine the groundwater recharge and transfer processes of a landslide prone area. First, the radiomagnetotelluric method was used to investigate the distribution of electrical resistivity (ρ) of the subsurface and build a three-dimensional model of permeability (k), through an experimental relation between ρ and k. Second, this structural model of permeability and additional climatologic data were used to fix boundary and recharge conditions to perform a three-dimensional and transient numerical simulation of the groundwater flow. Finally 18-Oxygen time series observed at the main springs were used to validate the model. This association of methods led to an improved characterization of the groundwater flow system at local scale and a better understanding of the role of this system on the landslide phenomenon. This structured approach is thought to be useful to design specific remediation strategies to drain the unstable mass.     

Origin of the high variability of water mineral content in the bedrock aquifers of Southern Madagascar

This study assesses the causes of the high spatial variability of the mineral content of groundwater in crystalline bedrock of Southern Madagascar. Although many kilometres from the coast and at a mean altitude of 400 m a.s.l, wells drilled in this area produce water with electrical conductivities in the range of 300–30,000 μS cm⁻¹ with a high spatial variability. Chemical and isotopic data are used to identify the processes involved in the groundwater mineralization. It is shown that the chemical composition of the groundwater in this region has its origin in (i) normal silicate and carbonate weathering reactions and (ii) input of marine salts, probably via rainfall recharge, modified by evapo-concentrative processes probably including precipitation and re-dissolution of secondary evaporites in the unsaturated zone. To obtain a better understanding of the spatial salinity distribution, well parameters such as yields, weathered zone thickness, weathered materials and morphological positions (upper slope, mid-slope, lower slope or valley bottom) are scrutinized.

A correlation was found between high salinity and low flow, shallow groundwater environments (flat hill tops, valley bottoms, weakly developed and clayey weathered zones) and between low salinity and high flow environments (granular, well-developed weathered zones and situation on valley slopes).     

Three-dimensional petrographical investigations on borehole rock samples: a comparison between X-ray computed- and neutron tomography

Technical difficulties associated with excavation works in tectonized geological settings are frequent. They comprise instantaneous and/or delayed convergence, sudden collapse of gallery roof and/or walls, outpouring of fault-filling materials and water inflows. These phenomena have a negative impact on construction sites and their safety. In order to optimize project success, preliminary studies on the reliability of rock material found on site are needed. This implies in situ investigations (surface mapping, prospective drilling, waterflow survey, etc.) as well as laboratory investigations on rock samples (permeability determination, moisture and water content, mineralogy, petrography, geochemistry, mechanical deformation tests, etc.). A set of multiple parameters are then recorded which permit better insight on site conditions and probable behavior during excavation. Because rock formations are by nature heterogeneous, many uncertainties remain when extrapolating large-scale behavior of the rock mass from analyses of samples order of magnitudes smaller. Indirect large-scale field investigations (e.g. geophysical prospecting) could help to better constrain the relationships between lithologies at depth. At a much smaller scale, indirect analytical methods are becoming more widely used for material investigations. We discuss in this paper X-ray computed tomography (XRCT) and neutron tomography (NT), showing promising results for 3D petrographical investigations of the internal structure of opaque materials. Both techniques record contrasts inside a sample, which can be interpreted and quantified in terms of heterogeneity. This approach has the advantage of combining genetic parameters (physico-chemical rock composition) with geometric parameters resulting from alteration or deformation processes (texture and structure). A critical analysis of such 3D analyses together with the results of mechanical tests could improve predictions of short- and long-term behavior of a rock unit. Indirect methods have the advantage of being non-destructive. However, as it is the case with large-scale geophysical surveying, XRCT and NT are affected by several error factors inherent to the interaction of a radiation modality (X-ray or neutron beam) with the atomic structure of the investigated materials. Recorded signals are therefore in particular cases not artifact-free and need to be corrected in a subsequent stage of data processing.     

New method for in situ characterization of loose material for landslide mapping purpose

The assessment of grain size distribution and plasticity of loose geological material, during in situ geological investigations, is not obvious. Visual appreciation allows an approximative quantification of the coarse granulometric fractions, but not of the fine ones. Field soils determination methods suggested until now, are visual and tactile tests leading to a very rough estimate, which is only qualitative and not very reproducible. The new proposed field test (GEOLEP method) allows a quick quantification of the fine fraction of loose material. It allows the determination of the sand fraction (fine and medium grained sands) as well as the methylene blue value of the samples. The necessary equipment to perform this test is light and compact and the time needed to analyze one sample is approximately 15 min. Thus it is also possible to carry out numerous measurements in one day. The calibrations were carried out on a selection of 13 natural samples, chosen for their representativeness of the typical alpine quaternary deposits. The results obtained with GEOLEP method are relevant compared with standardized laboratory tests; the obtained correlation indexes are of 73% for the comparison with laboratory stain test results and of 89% with a laboratory method using a similar procedure than the field test. The correlation we performed with Atterberg's limits tests shows that a rough approximation of plasticity index can also be obtained (R² = 75%). This method thus brings a new tool which should allow taking into account the lithological factor (by some quantitative and representative variables) in a reliable way for the evaluation of landslide hazards.     

Natural tracers in recent groundwaters from different Alpine aquifers

Groundwater with underground residence times between days and a few years have been investigated over more than 20 years from 487 remote sites located in different aquifer types in the Alpine belt. Analysis of the data reveals that groundwaters evolved in crystalline, evaporite, carbonate, molasse, and flysch aquifers can be clearly distinguished based on their major and trace element composition and degree of mineralisation. A further subdivision can be made even within one aquifer type based on the trace element compositions, which are characteristic for the lithologic environment. Major and trace element concentrations can be quantitatively described by interaction of the groundwater with the aquifer-specific mineralogy along the flow path. Because all investigated sites show minimal anthropogenic influences, the observed concentration ranges represent the natural background concentrations and can thus serve as a geo-reference for recent groundwaters from these five aquifer types. This geo-reference is particularly useful for the identification of groundwater contamination. It further shows that drinking water standards can be grossly exceeded for critical elements by purely natural processes.

---

Resumen Durnate más de 20 años se ha investigado aguas subterráneas con una residencia subterránea con una duración de días a varios años en 487 puntos remotos localizados en diferentes tipos de acuíferos en la cadena alpina. El análisis de los datos revela que las aguas subterráneas que han evolucionado dentro de acuíferos cristalinos, evaporíticos, carbonatos, flysch, y molasse se pueden distignuir claramente en base a la composición de sus elementos mayores y marcadores y al grado de minerlización. Asimismo es posible hacer una subdivisión más específica incluso dentro de un tipo de acuífero en base a las composiciones de los elementos marcadores los cuales soncaracterísticos del ambiente litológico. Las concentraciones de los elementos marcadores se pueden describir cuantitativamente por la interacción de las aguas subterráneas con la mineralogía específica del acuífero a lo largo del trayecto del flujo. Puesto qze todos los puntos investigados muestran mínimas influencias antropogénicas, los rangos deconcentraciones observados representan las concentraciones delescenario natural y, por tanto, pueden servir como georeferencia para aguas subterráneas recientes que forman parte de estos cinco tipos de acuíferos. Esta georeferencia es particularmente útil para la identificcación de contaminación de aguas subterráneas. Asimismo muestra que los estándares de agua potable pueden mostrar excesos en elementos críticos por procesos puramente naturales.

---

Résumé Leau souterraine ayant résidé sous la surface du sol entre quelques jours et quelques années a été étudiée sur une période de plus de 20 ans à partir de 487 sites éloignés situés dans différents types daquifères de la ceinture alpine. Lanalyse des données révèle que leau qui a évoluée dans des aquifères cristallins, évaporitiques, carbonatés, molassiques et composés de flysch, peut être facilement différenciée sur la base de sa composition en éléments majeurs et traces, ainsi que par son degré de minéralisation. Une subdivision supplémentaire peut être apportée à lintérieur même dun type daquifère en se basant sur la composition des éléments traces, lesquels sont caractéristiques de lenvironnement lithologique. La concentration en éléments majeurs et traces peut être expliquée quantitativement par linteraction de leau souterraine avec la composition minéralogique spécifique de laquifère le long des lignes découlement. Puisque la majorité des sites étudiés ne montrent que très peu dinfluences anthropogéniques, le registre de concentrations observées représente la concentration de fond naturelle et peut ainsi servir comme géo-référence pour les eaux souterraines récentes dans ces cinq types daquifères. Ces géo-références sont particulièrement utiles pour lidentification de la contamination des eaux souterraines. Par ailleurs, cela démontre que les standards deau potable peuvent être excédés pour certains éléments en raison de processus purement naturels.

     

Spécificités hydrogéologiques des hautes vallées alpines: Exemple de la Haute-Sarine (Suisse)

The alpine valley of the Haute-Sarine is on several accounts representative of the alluvial aquifers of mountain by its very environment and its hydrogeologic characteristics. The investigations and the analysis carried out within the framework of this study enabled us to improve knowledge on the Quaternary filling of the valley and to highlight the preferential supplies of the aquifer by infiltration of the river and precipitations and also by the underground contributions of evaporitic karsts. We also could note the opulence of groundwater resources of the Haute-Sarine both from the qualitative and the quantitative points of view. The knowledge of these typical characteristics of alluvial aquifers of high altitude allowed finally the development of a concept of management and protection of groundwater resources that falls under a sustainable development policy of the groundwater storage in the alpine areas. Manuscrit re?u le 4 février 2003 Révision acceptée le 30 mars 2005     

The combined use of radio-frequency electromagnetics and radiomagnetotellurics methods in non-ideal field conditions for delineating hydrogeological boundaries and for environmental problems

Radio frequency geophysical methods are known for being very versatile tools in ground- and groundwater investigation at shallow depths. They are fast and easy to use and allow a high density of information over large surfaces, which makes them very suitable for geological mapping sensu lato (faults, lithological contacts, groundwater-bearing structures, vulnerability maps, and contaminant plumes) and for selecting borehole locations. Significant improvement concerning 2D and 3D modelling of the data has occurred in recent decades. However, field surveys are very seldom performed in “ideal conditions”—the lack of necessary transmitters, in the convenient direction, in order to catch the structures in E- and H-pol for modelling purposes, is not an unusual situation. The present paper shows how the use of RMT and RF-EM is nevertheless of great help and suggests different ways to explore qualitative data in different geological settings. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Factors Influencing the Bacteriological Water Quality in Mountainous Surface and Groundwaters

The presence of pathogenic bacteria in water, along with the factors that act upon them, constitutes a field that has been little investigated in natural environments. It is clear, however, that these pathogens do have a significant effect on the quality of drinking water. Selected bacteria such as Salmonella, Campylobacter, Yersinia, and Listeria were searched for in groundwaters of mainly mountainous regions. Waters of one or two brooks in the catchment area of each spring were also analysed. Our results show that Campylo bacter and Listeria are frequent in all of these waters, even when land use in the catchment area is extensive (mountain pastures). Salmonella, on the other hand, was never found. Factors influencing the presence of Campylobacter, Yersinia, and Listeria were tested using Spearman rank correlations. The results suggest that the presence in water of some species of these bacteria (C. jejuni, L. monocytogenes 4b, and L. ivanovii) is related to a contaminant input, i.e. to the presence of cattle in the catchment area. For other species (C. coli, L. monocytogenes 1/2a, and Yersinia enterocolitica), however, one is forced to admit that no such connection between the presence of these species and that of an identified, potential contaminant input exists. We are therefore obliged to conclude either that these bacteria multiply in a natural way in the environment, or that they are able to survive in it for a long time. Finally, the present study shows that pathogenic bacteria are not always accompanied by indicators of faecal contamination (Escherichia coli, entero cocci); for this reason, they could potentially pose a risk to public health.     

An X-ray computed tomography-based index to characterize the quality of cataclastic carbonate rock samples

X-ray computed tomography (XRCT) can reconstruct, in a nondestructive way and in three-dimension, the distribution of densities within opaque materials. Consequently, it provides an effective possibility to characterize the inner content of rock core samples and, in particular their alteration products sensu lato which generally appear less dense than the intact rock matrix. In this paper, a new index, based on XRCT data, is tested for evaluating the degree of alteration of highly tectonized carbonate rock samples and is compared with visual-based classification systems. This XRCT-based analysis leads to a diagnosis of alteration which appears objective, precise and in agreement with the visual observations. Besides, this method takes into account the entire volume of the sample, is rapid to carry out and allows an intact rock core to be used for further laboratory testing.     

Rare earth elements in groundwater from different Alpine aquifers

Rare earth elements (REE) were determined in 39 groundwater samples collected at 14 sites under low- and high-flow conditions. Water samples derived from aquifers hosted in crystalline, molasse, flysch, carbonate and evaporite rocks located in Western Switzerland. The concentration of REE in groundwater circulating in different rocks showed large variations: lowest concentrations (ΣREE≤10 ng/L) occurred in groundwater from evaporite aquifers; highest concentrations (ΣREE up to 516 ng/L) were observed in carbonate aquifers, although REE in these waters do vary under different hydrological conditions; groundwater from other aquifers had ΣREE from 10 to 100 ng/L. Distinct REE signatures were observed in waters draining specific rocks. The REE patterns in groundwater from crystalline, molasse and flysch aquifers showed heavy-REE enrichment at different degrees. Groundwaters circulating in crystalline rocks were distinguished by negative anomalies in Ce and Eu, whereas those from carbonate aquifers were nearly flat with ΣREE and the magnitude of negative anomaly in Ce is likely to be controlled by iron concentrations. The REE-Post-Archean Australian Shales (PAAS) normalized patterns appear useful to recognize the aquifer type and suggest the possibility to use the REE as geochemical tracers.