Displaced dolomites in radiolarian cherts of the Chichibu Belt on Shikoku Island,Southwest Japan

The northern tract of the Chichibu Belt on Shikoku Island, Southwest Japan, in places contains dolomites of Late Carboniferous age displaced into radiolarian cherts. The sections here examined are along the Niyodo gorge, central Shikoku. The sequence begins with thinly interbedded dolomitized radiolarian cherts and dolomites with a small amount of dolomitized radiolarian claystone and calcisiltite beds. These rocks, 5–10 m thick, are succeeded by a thick section of bedded and massive dolomites, commonly 40–50 m thick, which have thin intercalations of radiolarian claystone in the upper part. This dolomite sequence is depositionally overlain by a sequence, up to 50 m thick, comprising thinly interbedded radiolarian cherts and claystones, which, in turn, contain lenticular bodies of dolomite.Thin-section examination reveals that most of dolomites of the area have an arenitic or lithic texture, and should be termed doloarenite and dololithite. This means that dolomites are detrital. All lines of evidence suggest that the dolomites were not formed in the same depositional site in which the radiolarian cherts were being accumulated, but formed instead as allochthonous bodies which were displaced into a deep oceanic basin of chert deposition.The following sequence of events is postulated: (1) deposition of shallow-water calcareous sediments in a subtidal area; (2) dolomitization in a very shallow-water to supratidal environment; (3) displacement of dolomitized sediments, possibly mainly as debris flows into a deep-water, truely pelagic realm, in which siliceous radiolarian sediments were accumulating; (4) continued accumulation of siliceous sediments after the major influx of dolomitized sediments; and (5) minor influxes of dolomitized sediments during the continuous accumulation of siliceous sediments.     

Triassic mid-oceanic sedimentation in Panthalassa Ocean: Sambosan accretionary complex, Japan

Abstract   The Sambosan accretionary complex of southwest Japan was formed during the uppermost Jurassic to lowermost Cretaceous and consists of basaltic rocks, carbonates and siliceous rocks. The Sambosan oceanic rocks were grouped into four stratigraphic successions: (i) Middle Upper Triassic basaltic rock; (ii) Upper Triassic shallow-water limestone; (iii) limestone breccia; and (iv) Middle Middle Triassic to lower Upper Jurassic siliceous rock successions. The basaltic rocks have a geochemical affinity with oceanic island basalt of a normal hotspot origin. The shallow-water limestone, limestone breccia, and siliceous rock successions are interpreted to be sediments on the seamount-top, upper seamount-flank and surrounding ocean floor, respectively. Deposition of the radiolarian chert of the siliceous rock succession took place on the ocean floor in Late Anisian and continued until Middle Jurassic. Oceanic island basalt was erupted to form a seamount by an intraplate volcanism in Late Carnian. Late Triassic shallow-water carbonate sedimentation occurred at the top of this seamount. Accumulation of the radiolarian chert was temporally replaced by Late Carnian to Early Norian deep-water pelagic carbonate sedimentation. Biotic association and lithologic properties of the pelagic carbonates suggest that an enormous production and accumulation of calcareous planktonic biotas occurred in an open-ocean realm of the Panthalassa Ocean in Late Carnian through Early Norian. Upper Norian ribbon chert of the siliceous rock succession contains thin beds of limestone breccia displaced from the shallow-water buildup resting upon the seamount. The shallow-water limestone and siliceous rock successions are nearly coeval with one another and are laterally linked by displaced carbonates in the siliceous rock succession.     

A multi-proxy reconstruction of spatial and temporal variations in Asian summer temperatures over the last millennium

To investigate climate variability in Asia during the last millennium, the spatial and temporal evolution of summer (June–July–August; JJA) temperature in eastern and south-central Asia is reconstructed using multi-proxy records and the regularized expectation maximization (RegEM) algorithm with truncated total least squares (TTLS), under a point-by-point regression (PPR) framework. The temperature index reconstructions show that the late 20th century was the warmest period in Asia over the past millennium. The temperature field reconstructions illustrate that temperatures in central, eastern, and southern China during the 11th and 13th centuries, and in western Asia during the 12th century, were significantly higher than those in other regions, and comparable to levels in the 20th century. Except for the most recent warming, all identified warm events showed distinct regional expressions and none were uniform over the entire reconstruction area. The main finding of the study is that spatial temperature patterns have, on centennial time-scales, varied greatly over the last millennium. Moreover, seven climate model simulations, from the Coupled Model Intercomparison Project Phase 5 (CMIP5), over the same region of Asia, are all consistent with the temperature index reconstruction at the 99 % confidence level. Only spatial temperature patterns extracted as the first empirical orthogonal function (EOF) from the GISS-E2-R and MPI-ESM-P model simulations are significant and consistent with the temperature field reconstruction over the past millennium in Asia at the 90 % confidence level. This indicates that both the reconstruction and the simulations depict the temporal climate variability well over the past millennium. However, the spatial simulation or reconstruction capability of climate variability over the past millennium could be still limited. For reconstruction, some grid points do not pass validation tests and reveal the need for more proxies with high temporal resolution, accurate dating, and sensitive temperature signals, especially in central Asia and before AD 1400.     

Synthesis of highly dense and fine-grained aggregates of mantle composites by vacuum sintering of nano-sized mineral powders

Synthesized mineral powders with particle size of <100 nm are vacuum sintered to obtain highly dense and fine-grained polycrystalline mantle composites: single phase aggregates of forsterite (iron-free), olivine (iron containing), enstatite and diopside; two-phase composites of forsterite + spinel and forsterite + periclase; and, three-phase composites of forsterite + enstatite + diopside. Nano-sized powders of colloidal SiO₂ and highly dispersed Mg(OH)₂ with particle size of ≤50 nm are used as chemical sources for MgO and SiO₂, which are common components for all of the aggregates. These powders are mixed with powders of CaCO₃, MgAl₂O_4, and Fe(CO₂CH₃)₂ to introduce mineral phases of diopside, spinel, and olivine to the aggregates, respectively. To synthesize highly dense composites through pressureless sintering, we find that calcined powders should be composed of particles that have: (1) fully or partially reacted to the desired minerals, (2) a size of <100 nm and (3) less propensity to coalesce. Such calcined powders are cold isostatically pressed and then vacuum sintered. The temperature and duration of the sintering process are tuned to achieve a balance between high density and fine grain size. Highly dense (i.e., porosity ≤1 vol%) polycrystalline mantle mineral composites with grain size of 0.3–1.1 μm are successfully synthesized with this method.     

Observation of pressure-induced phase transition of δ-AlOOH by using single-crystal synchrotron X-ray diffraction method

Pressure-induced phase transition of δ-AlOOH was confirmed between 6.1 and 8.2 GPa by using a single-crystal synchrotron X-ray diffraction method. The phase transition is reversible and unquenchable. Results from analysis of the distribution of X-ray diffraction intensities at 8.2 GPa reveal an additional systematic, absence of k + l odd for 0kl in comparison with h + l odd for h0l observed prior to the phase transition (space group, P2₁ nm). The space group of the post-transition phase should be Pnnm or Pnn2 to satisfy the systematic absence rule. Crystal structure refinements of the post-transition phase conducted for the three models (Pnnm, Pnn2, and P2₁ nm) indicate that the space group of the post-transition phase is Pnnm. The O–O distance of hydrogen bond in the post-transition phase at 8.2 GPa is 2.439(6) Å and is significantly longer than the predicted distance (2.366 Å) of the hydrogen bond symmetrization in δ-AlOOH. The H distribution in the post-transition phase would display a fully disordered hydrogen bond pattern.     

Tree-ring reconstructed summer temperature anomalies for temperate East Asia since 800 C.E.

We develop a summer temperature reconstruction for temperate East Asia based on a network of annual tree-ring chronologies covering the period 800–1989 C.E. The East Asia reconstruction is the regional average of 585 individual grid point summer temperature reconstructions produced using an ensemble version of point-by-point regression. Statistical calibration and validation tests indicate that the regional average possesses sufficient overall skill to allow it to be used to study the causes of temperature variability and change over the region. The reconstruction suggests a moderately warm early medieval epoch (ca. 850–1050 C.E.), followed by generally cooler ‘Little Ice Age’ conditions (ca. 1350–1880 C.E.) and 20th century warming up to the present time. Since 1990, average temperature has exceeded past warm epochs of comparable duration, but it is not statistically unprecedented. Superposed epoch analysis reveals a volcanic forcing signal in the East Asia summer temperature reconstruction, resulting in pulses of cooler summer conditions that may persist for several years. Substantial uncertainties remain, however, particularly at lower frequencies, thus requiring caution and scientific prudence in the interpretation of this record.     

SHRIMP U–Pb zircon dating of quartz-bearing eclogite from the Sanbagawa Belt, south-west Japan: implications for metamorphic evolution of subducted protolith

In order to decipher the origin of eclogite in the high‐P/T Sanbagawa metamorphic belt, SHRIMP U–Pb ages of zircons from quartz‐bearing eclogite and associated quartz‐rich rock (metasandstone) were determined. One zircon core of the quartz‐rich rock yields an extremely old provenance age of 1899 ± 79 Ma, suggesting that the core is of detrital origin. Eight other core ages are in the 148–134 Ma range, and are older than the estimated age for trench sedimentation as indicated by the youngest radiolarian fossil age of 139–135 Ma from the Sanbagawa schists. Ages of metamorphic zircon rims (132–112 Ma) from the quartz‐rich rock are consistent with metamorphic zircon ages from the quartz‐bearing eclogite, indicating that eclogite facies metamorphism peaked at 120–110 Ma. These new data are consistent with both the Iratsu eclogite body and surrounding highest‐grade Sanbagawa schists undergoing coeval subduction‐zone metamorphism, and subsequent re‐equilibration under epidote amphibolite facies conditions during exhumation.     

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.     

Temperature measurements of electrostatic shocks in?laser-produced counter-streaming plasmas

Collisionless shocks in counter-streaming plasmas, created by the high-power laser system Gekko XII HIPER, are investigated. The shock structure and density are measured by optical diagnostics such as shadowgraphy, interferometry, and streaked interferometry. The plasma density and temperature are estimated from self-emission measurements with visible light by streaked optical pyrometer and gated optical imager. Brightness temperatures are calculated considering the efficiency of the detectors, and electron temperatures are estimated.     

Paleomagnetic constraints on Miocene rotation in the central Japan Arc

We present new Middle Miocene paleomagnetic data for the central Japan Arc, and discuss their implications for Miocene rotation. To obtain a refined paleodirection, we made magnetic measurements on basaltic to andesitic lavas and intrusive rocks from 12 sites in the Tsugu volcanic rocks (ca 15 Ma) in the northern part of the Shitara area, Japan. Significant secondary magnetizations in samples with strong magnetic intensities are interpreted as lightning‐induced components. Mean directions carried by magnetite and/or titanomagnetite were determined for all sites. An overall mean direction with a northerly declination was obtained from dual‐polarity site means for nine sites. This direction is indistinguishable from the mean direction for coeval parallel dikes in the northern part of the Shitara area, and also indistinguishable from the Miocene reference direction derived from the paleopole for the North China Block in the Asian continent. These comparisons suggest little or no rotation or latitudinal motion in the study area with respect to the North China Block since 15 Ma. We obtained a refined early Middle Miocene paleodirection (D = 9.7°, I = 52.5°, α₉₅ = 4.8°; 30 sites) and paleopole (82.0°N, 230.8°E, A₉₅ = 5.6°) for Shitara by combining data from the Tsugu volcanic rocks and a coeval dike swarm. An anomalous direction found at three sites could be a record of an extraordinary field during a geomagnetic polarity transition or excursion. Paleomagnetic data from Shitara suggest that: (i) the western wing of the Kanto Syntaxis, a prominent cuspate geologic structure in central Honshu, underwent a counterclockwise rotation with respect to the main part of the southwestern Japan Arc between ca 17.5 Ma and 15 Ma; (ii) collision between the Japan and Izu–Bonin (Ogasawara) Arcs began prior to 15 Ma; and (iii) clockwise rotation of the entire southwestern part of the Japan Arc had ceased by 15 Ma.